Linus builds a whole gaming pc when he’s bored, while I’m checking the fridge for the 7th time to see if that one snack just magically appeared when I’m bored
When you check the fridge again and again. You aren't checking for new food. You are checking if your standards have lowered enough to eat what you have.
Linus, my suggestion is that your camera man, in this case, David, should also have a mic of his own so that we can hear the conversation better. In all videos, it seems like a very nice back and forth interaction between you and your camera man.
This is like therapy right here. If you want to chill out and disconnect from the crazy stuff in the world, and you love computer hardware, then this is the stuff to watch.
Me too. Was amazed when LTT actually hired her from popular demand. I was expecting a lot more videos to come out filled to the brim with that hilarious Madison/Linus banter. Despite the hire we don't actually see enough of her sadly.
Watching someone do something they're really good at and like to do, while they're talking shop (giving great insights), is just awesome. Love these PC building streams.
next time give David some kind of mic this super low key "Linus is just speaking his mind and David is a nice dude" is really amazing I also love the tangents on Wan show basically every time Linus is just talking about life is awesome
I would be so happy if I can buy it at msrp in my country :'( there's no micro center here. Do they do shipping though? I think the bots would've bought them up if they did so I'm still screwed
I have stumbled across your videos as I shopped for a new PC, I am not a Gamer but I am entertained by this video. I am an Electrician with a degree in Electronics. I just bought a Dell XPS 8950 but would love to build a computer. I wondered why you do not have a grounding wrist strap on. Subscribed.
You know after all these years watching you build PC's this year I've finally built my own, and everything went so smooth that I feel like I've done it millions of times! PS. Currently using it.
Grats. :) I've built so many over the years, but it's still fun. Well, except for the leftover parts one I crammed into a far too small case today - I have scrapes and cuts on both hands, and apparently the two 2-stick kits of 2400MHz RAM I found really hate each other. Both work at 2400 on their own, but the combination fails beyond 2133. Sigh.
Did the same earlier this year and it when pretty good especially given that I did some really stupid decisions like wanting to have an internal Floppy drive just because (I actually even managed to get that one working the way I planed it right from the start and it feels great when such a silly idea actually ends up working out)
Yeah, it's really not that hard. More people would do it if they saw how easy it is, just connecting modules to the motherboard. It's not like you're soldering circuit boards or anything. Before Linus there were hundreds of DIY websites. After your first build, later on upgrades are easy and so much cheaper.
The problem with Corsair's method for vertical GPUs is that they place them right up against the edge of the case. This is fine if you're going to water-cool your GPU, but if you're planning on just using the stock cooling solution, your air flow is going to be choked off by the side panel.
Actually linus, it seems that you could have gotten 2% better performance by going with the CL14 memory and also that's kind of an older heat spreader design for the G skill
That power supply is pretty sweet and I might get one for myself, but to your point - you can have a door-less basement. I had a friend in school who lived in a house built in the 1700s and it had a basement that could only be accessed through the floorboards and a second basement that could be accessed by climbing through the inside of the wall and sliding down. The house used to be the general store, so I suspect the basements were for storing dry goods and possibly bootlegging (possibly rum-running since the goods would be coming in from port).
Same. It's such a pleasure to hear someone who's an expert in his field just casually comment away for an hour. This video is full of unintentional little nuggets of wisdom and insight that are completely unscripted and unplanned and would never really on its own merit featuring in a dedicated video.
I love how the viewers, the camera and the crew are just the "rubber ducky" for Linus. He explains something to us and thus has to put it into words and then figures stuff out. Usually programmers have a rubber ducky. Before they ask their colleague or a boss about an issue, they explain it to this duck, either loud or in their mind, but building complete sentences, imagining the other side not knowing too much about the problem yet. Many then figure it out, without talking to anybody afterwards :D You can see it happen at 25:00 :)
I've been a developer for 20+ years and had never heard the term "rubber ducky" until a couple of years ago. I've always called the process the 'cardboard man'
You should watch Jays Two Cents, or Gamers Nexus. Steve tells you what works best with what, and Jay will show you how to build it. All Linus has taught me is that people with small hands and sandals drop stuff🤷♂️🤣
I was installing a water block for my GPU and adding it to my loop yesterday and somehow managed to have my one finger just jam right into one of the motherboard pins... yeah that was real fun... ouch
That's a classic feeling man. My first pc I built back in the day was an antec900. Every time I changed a part it was like my hands went through a war.
Hello Linus, PCB design engineer here, to answer your question about why they have two pcie connectors there, it is because the thin lines on the board can't handle all 200-300w of power going through them in just one connector. Long answer short, it can cause heating and stability issues.
The gpu plug thing. The PSU connector port has a substantially lower under load temperature than the GPU ports. As you heat up a conductor, the resistance increases, which then causes the conductor to heat up more, causing a runaway thermal condition when you pass a certain threshold. There are also typically sensors in the PSU that will throttle or shut off power to a port that is overheating on the PSU, but cannot monitor the port on the GPU, so they designed it in a way that the port on the PSU should be the first to overheat if a critical situation is eminent. That was the thought process behind the design, but whether or not it's a functional feature of the PSU depends on the manufacturer.
Linus, I just wanted to tell you how incredibly cool I find your personal & business ethics. I've watched LTT for a long time for entertainment and as a resource my PC store in Sarasota Florida. It's great to see another organization behaving as they should and honestly putting forth their best efforts for the people and not for profit .
those wires are likely raited for 20 to 30 x the power the only real limitation is the that the power supply may only give that much power avaialbe on that cable. the limitation is **NOT** the cable but weak 12 v rail on the power supply itself they have clearly speced the cable and connector to handle enough power. if they never get hot they arent running anywhere near the spec
Near the end: Use USB stick to install, with just enough storage for the install package. It's then forced to a) Pick the SSD instead as an install target b) Forego the usage of the install stick as a place to put anything. Also, you may wanna use the lowest Sata port for an install drive, or leave anything else out when using an nVME SSD.
Also by default using a raid for SSD is a nice way to both speed up for less, but also make better use of the mainboard resources (raid chip). The only exception to this is when the smaller SSD's are slower together than one faster one. That said, I use raid setups by default, since in most cases having two smaller ones is cheaper, while outspeeding the bigger and more expensive faster ones. It's like top speed for like 2TB or more drives, but they cost a bundle. Instead having two 250GB ones are just as fast or faster, while costing less total. If you wanna play another game, just download while grabbing coffee, mine take about 15 minutes, which is barely enough to have a nice 'throne' sitting. I actually use 2x 80 GB's for gaming, which cost me less than $50
I know it's a small thing, but soy sauce and butter is totally acceptable in Japan. In Taiwan, my parents in their younger days use to have lard with soy sauce. When the times were better, you would add a raw egg to the mix, and use the heat of the fresh cooked rice to half cook the egg
I’m still on path to build another PC. I’m just making sure I have a motherboard that can support the graphics cards of the future when prices finally come back down to earth. Right now I go with a lower end yet decent card that’s reasonable and affordable in today’s market. All other parts I still go for the best high end but also reasonably affordable.
Love these random PC Builds, no compromise, just the pure love for the build itself. My dream job is at LMG, and I'm sure one day I'll be able to be with you guys :D !
I’ve always wanted to build my own pc with specs good enough to play my games… but neurological issues mean I couldn’t do it on my own. Love watching them being built
just finished a custom PC with a RTX 3090 and intel i9 11900k, Z590 chipset, it cost me $3767 but damn, coming from a decade old laptop it was one hell of an upgrade
My local Memory Express surprised me with a GTX 3060 When I went in to buy all the other parts for my PC a week ago. Bought myself an entirely new Rig aside from the case, I was planning onwaiting for my GPU until they became abailable. They said they could see I wasn't scalping or mining so talked with one of their managers and hooked me right up. Preorder and stock is not available whatsoever so it was really nice to see them willing to help me out. They are available, shop local!!!! This experience changed my perception of the local computer supply industry. Shopping online is great but amazon and Newegg would never be able to pull strings like this. Best part is that I bought my Asus TUF RTX 3060 at MSRP with no markup.
I would love to see a gaming rig built that doesn't have all the RGB lighting effects, in a nice clean, unassuming case, that isn't as big as my carry-on luggage. Everything you see even things on New Egg, etc., are all huge RGB setups.
Cold in the bottom fans hot out the top. That's the correct way, because even if say a fan of two goes out, you still have thermal dynamics on your side. If you do it the other way and a fan goes out, you could potentially end up in a situation where the fans are trapping heat in the case.
I manage to do a 2 hour long task for my extra boring job without realizing when the 2 hours has past. I guess your voice is so familiar after all this years of LTT . Love your work Sebastian !
As far as doing the multiple loops. The first thing you do is connect them all together and flush them through with peroxide that way they should all be clean or equally contaminated.
I miss old school huge full tower cases. Even wouldn't mind a custom case with 6 or 8 external 5.25 bays, and at least 6 3.5 external drive bays, Plus more internal drive bays.
1:17:00 I have those same fans in my newest build. 3x120 on the front, 2x140 up top on a rad and 1x140 on the back. All plugged into a corsair rgb hub. The syncing in icue is cats a$$! Highly recommend 👌
What’s interesting. I don’t have the reference but I think it was enermax. They had a diagram showing to connect two separate cables from the power supply to the graphics card and not to use the cable that you were showing with the split 8pin. In cases of Max load, some single cables could get too hot for spec. Having a one cable standard would be so much easier for everybody I agree.
Linus posts a 2.5 h video of building 1 PC... „Oh well, I will just skip through it...“ *continues to watch the whole thing and get nothing else done this morning*....
PSU wires are #16 AWG cables witch is rated at about 15-18 AMPs, The RTX 3080Ti 12GB GPU uses about 505W of power that means it may peak at 12-13 AMPS divided in 6 of the 8 pins so yea yea it is perfectly safe to split it
The solder connection is the point of the connection max rating... overpowering the connection for long periods can cause the solder to heat to the point of becoming soft and any contact or movement of the system can pull the solder loose from the PCB. ( I've had it happen on an electric wheelchair joystick once )
Linus needs to add clips of him cleaning parts with his shirt to the Onlyfans. That happy trail being shown to sexy music as he buffs the parts to a glossy sheen.... oh baby! 😂
I am not a qualified electric engineer but as I understand it the thicker the cable is(the gauge) the more watts you can run along it without causing any problems like an electrical fire. The trade off of course is the thicker cables is the more stiff they become. In house wiring you would need a cable that can handle 10kwh like a power shower(running off a 40amp fuse from your fuse box or circuit breaker). You wouldn't run very thin cables for a power shower, you would end up with the cables burning and your house would burn down.
Or maybes they assume every PC builder has tones of PC screws already? I been building my PCs since the late 90s. I have an old custard powder jar that is full of PC case screws, motherboard screws, PSU screws, HDD/DVD screws and even old floppy screws. I even have a bag of 20 green Molex connectors that you insert the cables into using a screwdriver that I ended up never using.
@UCVR9cF1ixw8Or26OVhOytbQ Check Mr Rossman's YT channel on how the Asus rep told a customer that the thickness of a thermal pad is a sensitive company info.
@@FeyFox Hell, I jumped to an Asus lappy from shitty Lenovo lappy builds with HDD failing less than a year and chassis breaking by 2 years. Guess, I can't service my lappy without breaking my warranty to upgrade my storage and a single slot of RAM with them soldering the other one. At least it wasn't an absolute BS of a hardware compared to 1 RAM slot of Lenovo.
It's fixed now for me as I had the same issue a couple of days ago. I think TH-cam might've had a backlog of videos that needed to be transcoded or something. Happy watching!
Dual 8 pin connectors are so you can use a second power-supply if your current one does not suffice. Also to be able to install the card in a system with a second redundant power-supply.
There's something oddly nerve wracking seeing a man dicking around with PC parts that are worth more than my car and hearing him say " naw we're just gonna wing it "
Linus builds a whole gaming pc when he’s bored, while I’m checking the fridge for the 7th time to see if that one snack just magically appeared when I’m bored
aaaaa
When you check the fridge again and again. You aren't checking for new food. You are checking if your standards have lowered enough to eat what you have.
@@bubbaattack istfg i thought the same shiit xD
this is so accurate
Goddamn accurate
Linus, my suggestion is that your camera man, in this case, David, should also have a mic of his own so that we can hear the conversation better. In all videos, it seems like a very nice back and forth interaction between you and your camera man.
Just get 'im to SHOUT ;)
Seriously, tech quickie style.
I love hearing the banter from the bullpen!
"I've never lost faith in myself. Except every night at about 1am"
We all felt that one, David
ikr
kinda gives me solace that even an awesome like David isn't immune to the struggle
all my 1 am depression buddies welcome David
Glad to see the support guys love yall lol
@@davidp4270 say hi to linus
Me watching the video at pretty much 1 in the morning
I thought it was about something lewd
This is like therapy right here. If you want to chill out and disconnect from the crazy stuff in the world, and you love computer hardware, then this is the stuff to watch.
All this equipment would be a great gift for my parents only child
Good one😐
*WOWW!!* You’re a very thoughtful & kind brother!! 🤝
either you mean it or its fake so you can have the pc i really dont know
you've got a lucky brother bruh
@@zobbegang2578 its a joke
Not gonna lie, everytime I see Madison on a video a small part of me smiles with wholesomeness remembering the Asus build video 2 years ago
Same
aaaaannddd shes gone
Me too. Was amazed when LTT actually hired her from popular demand. I was expecting a lot more videos to come out filled to the brim with that hilarious Madison/Linus banter. Despite the hire we don't actually see enough of her sadly.
@@1ifemare aaaaaaaaaaaaand now she left lmfao
Think she left for good reasons.
Linus: GPUs are really hard to get right now.
Also Linus: Peels a brand new 3090.
they take the same ones and repeel them and repackage them after each video
@@knotpye4214 they don’t
@@loading9794 they've literally said they do. They disassemble and repackage PC parts after each buid
@@knotpye4214 they've said that they do
@@goovindnarula6470 that's what I said
"Make sure minors are exploited"
-Linus Sebastian, 2021
I was thinking the same thing haha
Anything is better than that girl who did the secret shopper thing and build a computer by wiggling and shaking everything after install
@@Josh-hr5mc I was actually really amused by that
@@Josh-hr5mc What? If you can't shake and wiggle it, it aint good! Sarah Butt 2021.
thats pretty sus bro
Watching someone do something they're really good at and like to do, while they're talking shop (giving great insights), is just awesome. Love these PC building streams.
next time give David some kind of mic
this super low key "Linus is just speaking his mind and David is a nice dude" is really amazing
I also love the tangents on Wan show
basically every time Linus is just talking about life is awesome
Linus: i am bored
His bank account: ah sh*t here we go again
Micro Center: Sponsor.
You Tube: Ad Revenue.
LTT: Cha-ching!!
Lmao
Linus bank account:
"Oh ooh..."
"Never mind..."
Linus reminds me of Michael Scott from the office the way he jokes with his employees
@Being Real shut up
I wish Micro Center would sponsor the ability for me to buy a graphics card.
Youre not alone
Me2
Me 3
I would be so happy if I can buy it at msrp in my country :'( there's no micro center here. Do they do shipping though? I think the bots would've bought them up if they did so I'm still screwed
@@xxSweetCandicexx me4
Hes the only person I know who can casually build a computer when hes bored.
And then disassemble it straight after 😂
AND have full accessibility to top end components lol.
You could always tear down yours then build it again
Shit I would if I had the parts and money.
I mean I can as well, I actually have some random pc parts. So I can build a pc every time I feel really anxious. And then tear it back down
The infinite mirror effect going on with that monitor and the slight delay of each Linus is mesmerizing.
I have stumbled across your videos as I shopped for a new PC, I am not a Gamer but I am entertained by this video. I am an Electrician with a degree in Electronics. I just bought a Dell XPS 8950 but would love to build a computer. I wondered why you do not have a grounding wrist strap on. Subscribed.
You know after all these years watching you build PC's this year I've finally built my own, and everything went so smooth that I feel like I've done it millions of times! PS. Currently using it.
Grats. :)
I've built so many over the years, but it's still fun.
Well, except for the leftover parts one I crammed into a far too small case today - I have scrapes and cuts on both hands, and apparently the two 2-stick kits of 2400MHz RAM I found really hate each other. Both work at 2400 on their own, but the combination fails beyond 2133. Sigh.
Welcome to the pc masterrace
@@voffma4798 I've always used PC's, but not built by me, so I am feeling kinda proud of mine now. :D
Did the same earlier this year and it when pretty good especially given that I did some really stupid decisions like wanting to have an internal Floppy drive just because (I actually even managed to get that one working the way I planed it right from the start and it feels great when such a silly idea actually ends up working out)
Yeah, it's really not that hard. More people would do it if they saw how easy it is, just connecting modules to the motherboard. It's not like you're soldering circuit boards or anything. Before Linus there were hundreds of DIY websites.
After your first build, later on upgrades are easy and so much cheaper.
"we need to do a quick shake test, for safety"
*slams pc onto table*
It's like a tech horror moment.
Linus: That's what Sarah taught me
28 STAB WOUNDS
Im the 99th liker
@@iron71gear13 23.
@@iron71gear13 you didn't want to leave him a chance, huh?
The problem with Corsair's method for vertical GPUs is that they place them right up against the edge of the case. This is fine if you're going to water-cool your GPU, but if you're planning on just using the stock cooling solution, your air flow is going to be choked off by the side panel.
Actually linus, it seems that you could have gotten 2% better performance by going with the CL14 memory and also that's kind of an older heat spreader design for the G skill
As opposed to the sexy new heat spreader they just released🥴
Linus: "This is taking a bit, I'm sorry is the camera getting heavy?" Also Linus "A thicker noodle is best"
"We are gonna fill all the holes here today on this live stream"
- Linus Sebastian ,2021
That's what she said
Must be an only fans video.
gskill: we're making new memory designs, please don't tell anyone
linus: ... 🙊 ...
🤣🤣🤣🤣
I want to know, what is the most recycled part. How many builds has it been in?
Mmm good idea, they could do a video on proven longevity for people who can’t afford a brand new top of the line card…
I suspect the RAM, CPU and SSD's are the most used parts.
That power supply is pretty sweet and I might get one for myself, but to your point - you can have a door-less basement. I had a friend in school who lived in a house built in the 1700s and it had a basement that could only be accessed through the floorboards and a second basement that could be accessed by climbing through the inside of the wall and sliding down. The house used to be the general store, so I suspect the basements were for storing dry goods and possibly bootlegging (possibly rum-running since the goods would be coming in from port).
These are some of my favorite videos. I can just put it on in the background and listen to Linus quietly talking to himself. It's very relaxing.
Same. It's such a pleasure to hear someone who's an expert in his field just casually comment away for an hour. This video is full of unintentional little nuggets of wisdom and insight that are completely unscripted and unplanned and would never really on its own merit featuring in a dedicated video.
I love how the viewers, the camera and the crew are just the "rubber ducky" for Linus. He explains something to us and thus has to put it into words and then figures stuff out.
Usually programmers have a rubber ducky. Before they ask their colleague or a boss about an issue, they explain it to this duck, either loud or in their mind, but building complete sentences, imagining the other side not knowing too much about the problem yet.
Many then figure it out, without talking to anybody afterwards :D You can see it happen at 25:00 :)
I've been a developer for 20+ years and had never heard the term "rubber ducky" until a couple of years ago. I've always called the process the 'cardboard man'
I admire how Linus builds up gaming PCs with ease. I hope oneday I am able to do that! Mad respect Linus!
Once you build 2-3 it becomes basically second nature, unless you have to diagnose a problem.
You should watch Jays Two Cents, or Gamers Nexus. Steve tells you what works best with what, and Jay will show you how to build it. All Linus has taught me is that people with small hands and sandals drop stuff🤷♂️🤣
@@-SP. very true i just built a system a few days ago took me about 90 minutes, sadly have to use ryzen 3200g could not get hold of a gpu at all
I hope it for you bro
it nothing more challenging than lego bricks these days.
Took my computer apart to have building together vibes, ended up cutting my hand twice on my cheap case
I was installing a water block for my GPU and adding it to my loop yesterday and somehow managed to have my one finger just jam right into one of the motherboard pins... yeah that was real fun... ouch
That's a classic feeling man. My first pc I built back in the day was an antec900. Every time I changed a part it was like my hands went through a war.
Made my day
classic story, like last week, I was upgrading my power supply, and I cut my hand 5 different times on my case running all the cables
@@dikyarif8027 ¿
Hello Linus, PCB design engineer here, to answer your question about why they have two pcie connectors there, it is because the thin lines on the board can't handle all 200-300w of power going through them in just one connector. Long answer short, it can cause heating and stability issues.
This is cool that you design PCB boards 😀
I love how the live chat is just them asking for a pc when it was obvious he wasn't going to give them a pc or even look at chat lmao
i love the fact that they just have a casual conversation about pasta and rice for a full 10 minutes
1:40:47 yes apparently
I typed it wrong three times so i just gave up😂
3:37 you actually had me up until the capacilmilator part
My mom just passed away and the silence that has followed is deafening...Linus speaking has broken that silence long enough to make it easier. Thanks
I’m so sorry ❤️
@@Romygosling Thank you for the kind words
@Being Real Dude I'm a muslim but this really isn't the time
lmao
here is my discord. IamJames#1759 if you need someone.
The gpu plug thing. The PSU connector port has a substantially lower under load temperature than the GPU ports. As you heat up a conductor, the resistance increases, which then causes the conductor to heat up more, causing a runaway thermal condition when you pass a certain threshold. There are also typically sensors in the PSU that will throttle or shut off power to a port that is overheating on the PSU, but cannot monitor the port on the GPU, so they designed it in a way that the port on the PSU should be the first to overheat if a critical situation is eminent. That was the thought process behind the design, but whether or not it's a functional feature of the PSU depends on the manufacturer.
Linus, I just wanted to tell you how incredibly cool I find your personal & business ethics. I've watched LTT for a long time for entertainment and as a resource my PC store in Sarasota Florida. It's great to see another organization behaving as they should and honestly putting forth their best efforts for the people and not for profit .
Anytime LMG has no content to upload: Time to build a PC
True, im waiting on the Sony projector video
Yesterdays video was also a PC build
@@michaellivingston6768 I don't really mind it, but he does a PC build video almost every week
i mean it is the main premise of this channel idiot
what about the game show, is it livestream only or it'll be uploaded on YT ?
sad that micro center doesnt ship internationally. these contests are usually always us only which is a bummer :/
ig?
You're so cute girl 😎
@@mattynicolaz9832 down bad
Yeah I know. I'm from the Netherlands and can't be entered in the contest. Wished there was a microcenter in Europe for starters
@@angelsworld9296 yessss
Now in spanish? Gtfo go simp elsewhere
I love that microcenter has the share function disabled on their website when the whole contest requires you to share your build.
those wires are likely raited for 20 to 30 x the power the only real limitation is the that the power supply may only give that much power avaialbe on that cable. the limitation is **NOT** the cable but weak 12 v rail on the power supply itself they have clearly speced the cable and connector to handle enough power. if they never get hot they arent running anywhere near the spec
Near the end: Use USB stick to install, with just enough storage for the install package.
It's then forced to a) Pick the SSD instead as an install target b) Forego the usage
of the install stick as a place to put anything.
Also, you may wanna use the lowest Sata port for an install drive, or leave anything else
out when using an nVME SSD.
Also by default using a raid for SSD is a nice way to both speed up for less,
but also make better use of the mainboard resources (raid chip).
The only exception to this is when the smaller SSD's are slower together than
one faster one. That said, I use raid setups by default, since in most cases having
two smaller ones is cheaper, while outspeeding the bigger and more expensive
faster ones.
It's like top speed for like 2TB or more drives, but they cost a bundle.
Instead having two 250GB ones are just as fast or faster, while costing less total.
If you wanna play another game, just download while grabbing coffee,
mine take about 15 minutes, which is barely enough to have a nice 'throne' sitting.
I actually use 2x 80 GB's for gaming, which cost me less than $50
For really fast gaming for older games, 16GB ram with RamDrive.
I know it's a small thing, but soy sauce and butter is totally acceptable in Japan. In Taiwan, my parents in their younger days use to have lard with soy sauce. When the times were better, you would add a raw egg to the mix, and use the heat of the fresh cooked rice to half cook the egg
Kind of like you cook the egg+cheese sauce for carbonara with the heat from the pasta? That sounds kind of nice.
Love the cardboard cutout lurking in the background. Came back from listening to the audio and Hello! Nice soccer pose protecting the goods.
These live streams are a gem. Because they are not scripted and we can see Linus's true expression about things.
*so happy i got my hands on a Ryzen 7 5800X and RTX 3070Ti....got them 3 days ago and paired together my rig runs like a BEAST!!!!*
I’m still on path to build another PC. I’m just making sure I have a motherboard that can support the graphics cards of the future when prices finally come back down to earth. Right now I go with a lower end yet decent card that’s reasonable and affordable in today’s market. All other parts I still go for the best high end but also reasonably affordable.
I find this therapeutic, can't wait till I have the cash to finally build a pc in my new living space which is a boat.
Please don’t put a PC in your boat
@@redpikdman why not, anomaly did it
Love these random PC Builds, no compromise, just the pure love for the build itself. My dream job is at LMG, and I'm sure one day I'll be able to be with you guys :D !
Well, they have job openings with posted qualifications, even a YT fun write type job
I’ve always wanted to build my own pc with specs good enough to play my games… but neurological issues mean I couldn’t do it on my own. Love watching them being built
just finished a custom PC with a RTX 3090 and intel i9 11900k, Z590 chipset, it cost me $3767 but damn, coming from a decade old laptop it was one hell of an upgrade
thank for being a part of the inspiration to start making me build pcs with my children
I really like the aesthetics of the TuF I just hope its just as "TuF" as it looks like.
I joined exactly as it ended.
Man.
'C'mon man': Joe Biden
how to set up a bob Marley
wtf am i doing
Great. you missed nothing.
"I'll write it, and we'll do it live!" - Linus (but ya gotta say it with anger like Bill O')
My local Memory Express surprised me with a GTX 3060 When I went in to buy all the other parts for my PC a week ago. Bought myself an entirely new Rig aside from the case, I was planning onwaiting for my GPU until they became abailable. They said they could see I wasn't scalping or mining so talked with one of their managers and hooked me right up. Preorder and stock is not available whatsoever so it was really nice to see them willing to help me out. They are available, shop local!!!! This experience changed my perception of the local computer supply industry. Shopping online is great but amazon and Newegg would never be able to pull strings like this. Best part is that I bought my Asus TUF RTX 3060 at MSRP with no markup.
I would love to see a gaming rig built that doesn't have all the RGB lighting effects, in a nice clean, unassuming case, that isn't as big as my carry-on luggage. Everything you see even things on New Egg, etc., are all huge RGB setups.
This stream was amazing, please do more like this!
What’s hilarious is that I got an ad of *LTT in his own videos* explaining honey browser extension app lmfao
You guys got me there for a second... Thought someone was standing sneakily in the corner only to realise that it was just a Linus cardboard cutout.😂
Same! I was thinking that he was just really committed to being his body guard or something lmao
Cold in the bottom fans hot out the top.
That's the correct way, because even if say a fan of two goes out, you still have thermal dynamics on your side.
If you do it the other way and a fan goes out, you could potentially end up in a situation where the fans are trapping heat in the case.
It feels good going back and watching these knowing the prices actually do get better lol
Fax
7:23
The second Linus scared the shit out of me!
I didn't realize it till you said this lol
I manage to do a 2 hour long task for my extra boring job without realizing when the 2 hours has past. I guess your voice is so familiar after all this years of LTT . Love your work Sebastian !
Was this actually streamed in potato? I'm only getting an option for 360p playback
You're not alone, was starting to think that it was only on my end.
No, stream was in fhd day ago, its only 360p now, its broken
i have it too
I started watching the video yesterday and it had 1080p...
When TH-cam (Google) starts running out of storage space.... (I'm getting 360p as well here).
As far as doing the multiple loops. The first thing you do is connect them all together and flush them through with peroxide that way they should all be clean or equally contaminated.
I miss old school huge full tower cases. Even wouldn't mind a custom case with 6 or 8 external 5.25 bays, and at least 6 3.5 external drive bays, Plus more internal drive bays.
i really want to see a micro centre in australia, that would so cool
Hell,I'd like to see one here in Oklahoma! :)
I'd take one in Florida. I think I have to go to Georgia to see one.
I like how chill the vibe of the whole stream and how Linus is
20:20 did Linus have a sandwich before livestreaming? lmaoo
1:17:00
I have those same fans in my newest build. 3x120 on the front, 2x140 up top on a rad and 1x140 on the back. All plugged into a corsair rgb hub. The syncing in icue is cats a$$! Highly recommend 👌
What’s interesting. I don’t have the reference but I think it was enermax. They had a diagram showing to connect two separate cables from the power supply to the graphics card and not to use the cable that you were showing with the split 8pin. In cases of Max load, some single cables could get too hot for spec. Having a one cable standard would be so much easier for everybody I agree.
Linus posts a 2.5 h video of building 1 PC... „Oh well, I will just skip through it...“ *continues to watch the whole thing and get nothing else done this morning*....
Lmao so me 😂
... morning? ... Oh. look, it IS morning. Almost. Soon. It's 3 am. I should sleep.
Streamed: 5 days ago
Everyone: watches now
_"What you want is a warm blanket and cool air to breathe."_
YARP!
PSU wires are #16 AWG cables witch is rated at about 15-18 AMPs, The RTX 3080Ti 12GB GPU uses about 505W of power that means it may peak at 12-13 AMPS divided in 6 of the 8 pins so yea yea it is perfectly safe to split it
The solder connection is the point of the connection max rating... overpowering the connection for long periods can cause the solder to heat to the point of becoming soft and any contact or movement of the system can pull the solder loose from the PCB. ( I've had it happen on an electric wheelchair joystick once )
Do you guys plan on doing a scrap yard again in the future?
i loved watching those
linus vs. jake or alex would be fun to watch tbh
They probably do. But covid has more than likely no pun intended scrapped all plans of it because of social distancing
Linus needs to add clips of him cleaning parts with his shirt to the Onlyfans. That happy trail being shown to sexy music as he buffs the parts to a glossy sheen.... oh baby! 😂
Lol
Sus
Sus
Wish I could do this when I'm bored. I have to resort to taking my car apart and putting it back together "better"
I am not a qualified electric engineer but as I understand it the thicker the cable is(the gauge) the more watts you can run along it without causing any problems like an electrical fire. The trade off of course is the thicker cables is the more stiff they become. In house wiring you would need a cable that can handle 10kwh like a power shower(running off a 40amp fuse from your fuse box or circuit breaker). You wouldn't run very thin cables for a power shower, you would end up with the cables burning and your house would burn down.
Or maybes they assume every PC builder has tones of PC screws already? I been building my PCs since the late 90s. I have an old custard powder jar that is full of PC case screws, motherboard screws, PSU screws, HDD/DVD screws and even old floppy screws. I even have a bag of 20 green Molex connectors that you insert the cables into using a screwdriver that I ended up never using.
i built a whole dresser while having this video on. Thanks linus for keeping me company the whole time talking about god knows what
Good thing the Asus components aren't yet censored in this video, lol
why would they need to be censored? did I miss something?
@UCVR9cF1ixw8Or26OVhOytbQ Check Mr Rossman's YT channel on how the Asus rep told a customer that the thickness of a thermal pad is a sensitive company info.
Okay so now nobody should buy asus products because of that?
I have a tuf 3080 and couldnt say a bad thing about it🤔
@@FeyFox Hell, I jumped to an Asus lappy from shitty Lenovo lappy builds with HDD failing less than a year and chassis breaking by 2 years. Guess, I can't service my lappy without breaking my warranty to upgrade my storage and a single slot of RAM with them soldering the other one. At least it wasn't an absolute BS of a hardware compared to 1 RAM slot of Lenovo.
I think that Corsair is like: "If you are using our case you shoud be using our power supply...
microcenter is the best place to get all of the computer items. everyone who works there is almost as smart as linus. they have great deals too
I love micro center. I built my whole PC with them. Right before the GPU shortage.
Friend: What do you do for a livin-
Linus: I spend money to make money to build something with money on TH-cam.
20:22 when linus spits everywhere XDDD
Awesome stream. Thanks LTT as always
1:30:00 just connect the testwatercoolingsystems for a while together bevore adding the snakeoil, so all systems will have the same contaniments.
There is a bracket holder that goes on the end and supports it. EK-Loop Vertical GPU Holder
"I'm bored. Build a gaming PC with me!!"
Meanwhile me with 100$: 🤨
Did someone in chat seriously say "I'm glad you fired ___"???? Thats so fricking rude, wtf?
360p :(
It's fixed now for me as I had the same issue a couple of days ago. I think TH-cam might've had a backlog of videos that needed to be transcoded or something. Happy watching!
I wish there was a dollar figure for this exact PC.. it’s fantastic
Dual 8 pin connectors are so you can use a second power-supply if your current one does not suffice.
Also to be able to install the card in a system with a second redundant power-supply.
There's something oddly nerve wracking seeing a man dicking around with PC parts that are worth more than my car and hearing him say " naw we're just gonna wing it "
20:23 Apparently Linus spits. Good to know.
“Nvidia wants to make sure that minors keep getting exploited” -Linus
I used to watch these vids a while ago but I just stopped and I'm finally gonna build my first pc and started watching these again lol
For an RTX 3080 and 3090 GPU always install 2 PCIE cables from the power supply