Bro I cant express my gratitude of your step by step videos. I know you don't have to do these videos and the time it takes to set up the camera and edit bro is much appetited. As for myself I know a little bit about cars but nothing on your level so when my son needed his timing chain replaced I second guessed if I could do it. The Toyota dealer wanted thousands for the job and these days that's a lot of money. I came across your videos and by far they are the best on the web. I'm waiting for part 3 of the 2ZR-FE you have going so I can complete the job. lol Your the best bro I mean this and thank you so very much !!!!!
Interesting you were happy to spin the cams with out the chain turning the crank. Obviously the valves don't contact the pistons on these? No interference?
I have noticed most videos don't show how to properly install the crank bolt after the job is complete. I know it needs a special tool but one if we don't have it what can we do? I see some make a tool but I wonder how it will work how do you hold the harmonic balancer from turning while torquing it down so I will anxiously wait for part 3 hopefully it will have that procedure!!
Great job! I learn a lot from it. One question please, what is the function of the black bolt (which appears at bottom in 6:52--7:50) just above the Crankshaft Position Sensor? (I notice it comes with the frame). That bolt in my car looks like leaking(is it possible?), could I simply wrench it out, then apply gasket maker and wrench it back?
Bro I cant express my gratitude of your step by step videos. I know you don't have to do these videos and the time it takes to set up the camera and edit bro is much appetited. As for myself I know a little bit about cars but nothing on your level so when my son needed his timing chain replaced I second guessed if I could do it. The Toyota dealer wanted thousands for the job and these days that's a lot of money. I came across your videos and by far they are the best on the web. I'm waiting for part 3 of the 2ZR-FE you have going so I can complete the job. lol Your the best bro I mean this and thank you so very much !!!!!
Thanks for comment
Jazak'Allah for putting it together a wonderful step by step, procedure, I enjoyed and learned, keep up the good work. Raazi from Canada
I have this engine in my 2011 Corolla/ 133miles, I too have the rattle on cold start.
Thanks as always 👍🏼
I think it will be a bad vvti sound, please make a video and send it to me
Este motor dobla válvulas.? Que pasa si está fuera de tiempo
The information on the gasket kit was helpful to me. Thanks
Thanks for comment
Interesting you were happy to spin the cams with out the chain turning the crank. Obviously the valves don't contact the pistons on these? No interference?
When doing this, do not keep the position of the piston at the top
What type of silicone gasket maker are you using.
I have noticed most videos don't show how to properly install the crank bolt after the job is complete. I know it needs a special tool but one if we don't have it what can we do? I see some make a tool but I wonder how it will work how do you hold the harmonic balancer from turning while torquing it down so I will anxiously wait for part 3 hopefully it will have that procedure!!
Wonderful. Neat clean, and precise job !
Next please.....2ZZGE !
Trinidad & Tobago, West Indies.
Thanks for comment
Thanks for your great idea about the 3zrengine I'm great full for more experience Thank
Thanks for comment
Muy buen video,, gracias.
Thanks for comment
Did you use a new block and pistons or did you rebore and fitted oversize pistons?
The short block in this video is brand new
Complete Engine Rebuilding th-cam.com/video/7VQFN4hoVyo/w-d-xo.html
Thank you 🙏 for this helpful video
Great job! I learn a lot from it. One question please, what is the function of the black bolt (which appears at bottom in 6:52--7:50) just above the Crankshaft Position Sensor? (I notice it comes with the frame). That bolt in my car looks like leaking(is it possible?), could I simply wrench it out, then apply gasket maker and wrench it back?
This bolt does not have a gasket, if it is leaking you can re-apply it with silicone
Thank you very much.
15k complete good work
Thanks for comment
I love you videos one I will a superstar like you🙏🙏🙏
Thanks for comment Dear
Are these good engines? Common problems?
Yes
Good job I love is❤
Thanks for comment
Very helpful to me
Love you sir 😊
Thanks for comment
Great job
Thanks for comment
Please make understand well the timing of this engine?
Next video Timing Chain marks setting
What do you charge to do that and how long will it take you?
About five hundred dollars,
This work takes two days to complete
@@MayoCarsDR where is this shop?
I see quality work here
those customers are lucky to find you ,the area I live in , terrible mechanics
Thanks for comment
Common problems with these engines: timing chain tensioner
Yes, thanks for comment
👍👌👌