Hi, you can find a lot of info in my GitHub: github.com/gg1212/AgOpenGPS_SectionControl_ESP32/tree/main/Mueller_Spray_control-integration Or you can ask questions on the discourse: discourse.agopengps.com/t/mueller-spraycontrol-section-control/599/8
I read all discouse and your github but I have a slightly different driver, I needed your help, I tried to sign up for the switches, but there are 2 lines and 2 relays on one line, but it didn't work because the driver didn't know which current section was open and which was closed
@@PecqAgrithe controller I use is Dammann Control-sc II, Command BT II, I don't have any cabling yet, I'm trying to run it on the table but I can't understand the principle of operation, I would like to somehow send you a photo of the controller inside to see if it has the same principle of operation
@@AgroSzpilki It looks very similar to mine. Have you looked at the wiring diagram and pinout on discourse? I guess your box should have the same or very similar. Please reply to the discourse topic if you want to add pictures, that will be easier.
Bonjour,
Il y aurait moyen de venir voir chez vous comment agopengps fonctionne, pour aider à se lancer ?
Oui pourquoi pas
Good morning, it is possible to contact you regarding controller modifications
Hi, you can find a lot of info in my GitHub: github.com/gg1212/AgOpenGPS_SectionControl_ESP32/tree/main/Mueller_Spray_control-integration
Or you can ask questions on the discourse: discourse.agopengps.com/t/mueller-spraycontrol-section-control/599/8
I read all discouse and your github but I have a slightly different driver, I needed your help, I tried to sign up for the switches, but there are 2 lines and 2 relays on one line, but it didn't work because the driver didn't know which current section was open and which was closed
What driver are you using? What wiring have you done?
@@PecqAgrithe controller I use is Dammann Control-sc II, Command BT II, I don't have any cabling yet, I'm trying to run it on the table but I can't understand the principle of operation, I would like to somehow send you a photo of the controller inside to see if it has the same principle of operation
@@AgroSzpilki It looks very similar to mine. Have you looked at the wiring diagram and pinout on discourse? I guess your box should have the same or very similar. Please reply to the discourse topic if you want to add pictures, that will be easier.
It is possible to contact you via e-mail?
Give me your address or another way to contact you and I will contact you