New World Record from Jörg M. JAG`S Team ( 2. München SAW 2016 / Class L8 Hydro )
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2016
- #MunichSAW #rcboatworldrecord
Neustes Video von 2018 mit einem Topspeed von 331 km/h: • Fastest rc boat in the...
Aktuelles Video (2017) mit 314 km/h avg: • 3. Munich SAW 2017 Fas...
Jörg ist mit seinem L8 Rigger im September 2016 auf dem 2. München SAW einen neuen absoluten Weltrekord für RC Boote gefahren. Die Durchschnittsgeschwindigkeit für die 2x 100m lag bei 285,393 Km/h. Dieser Rigger erreicht einem Topspeed von über 300 Km/h und wird mit einem Brushless Motor der Firma "Lehner Motoren Technik" ( LMT ) befeuert. Es handelt sich dabei um einen 2 Poler mit hoher Drehzahlfestigkeit. Der Rest des Riggers ist alles Eigenbau (Rumpf, Propeller, ESC, mit Lipo ist die Verschraubung der Zellen untereinander und zum Regler hin gemeint, Hardware usw.)
Boot: JAG's T Hydro 2015/2016, ca. 125cm lang, ca. 55cm breit, ca. 3.4kg fahrfertig
Motor: LMT 2260/5 HiAmp (mit 8mm Welle und Rotorhülse)
Regler: eigene Leistungsendstufe aus 42 Stk. IRFS7434-7P FETs mit Schulze future 18.xx Controller-Platine
Akkkus: 8s1p RoaringTop 5100 80C, vorgewärmt auf ca. 45°C
Kupplung: Zander 8mm/2.5mm
Propeller: JAG's C2044/3
Fernsteuerung: Graupner X-8N mit GR-16 Doppelantennen-Empfänger und zwei 30cm Antennen
Empfängerakkus: SLS XTRON 2s 335mAh
Servo: MKS HV 747 fürs Ruder und MKS HV 6100 für die Bremsklappen
Hardware: 2.5mm Federstahlwelle mit JAG's Strut und JAG's Ruderhalter (hergestellt durch MBP-RC), Ruder aus Messerblatt
Datalogger: SM Modellbau Unilog 2 (mit Eigenbau 1500A Stromsensor)
Laut Datenlogger lag die Beschleunigungsleistung beim 298,6km/h Pass bei ca. 17kW (590A bei 29.0V), ausbeschleunigt nach ca. 4s bei ca. 9.5kW (320A bei 29.5V). Die Drehzahl stieg ausbeschleunigt bis auf 63.900 U/min an - beim Sprung über die eigene Heckwelle des Hinpasses kurzzeitig auf 70.000 U/min. Das Boot hat doppelte Bremsklappen in den Leitwerken, die Zusammen mit der Motorbremse aktiviert werden, um bis zum Ende des Gewässer zum Stehen zu kommen. - ยานยนต์และพาหนะ
12.78hp and 17Kw is 22.7973 horse power...
@ 745.699872 watts per Hp or equal to 550 foot-pounds per second
I like the bus-bars ~600A
W0W!
From above g00gle translate.
"According to the data logger, the acceleration at 298.6km / h was approx. 17kW (590A at
29.0V), accelerated after approx. 4s at approx. 9.5kW (320A at 29.5V). The
engine speed increased to 63,900 rpm with the accelerator jumping up to
70,000 rpm during the jump over the rear tail of the tailpiece. The
boat has double brake flaps in the tailpipes, which are activated
together with the engine brake to stop to the end of the water body."
Sehr beeindruckend, Sir
Tolle Arbeit, congraudlation!
Ich danke Ihnen für das Teilen
Sweetest sound EVER. I hope this boat never sinks or burns and that it is going to hunt new speed records in the future ! I absolutely LOVE this rigger :) It´s a "one-of-a-kind" masterpiece ! => Brilliant !!!
Jörg the owner of the rigger built it for speeds up to 350 km/h. Currently he stands at 315 km/h. Of which I also have the video: th-cam.com/video/cRXafcIwvkY/w-d-xo.html
Excelent work on copper,and a outstanding idea!!!!!! Thanks for add video and info.
So muss das sein! Viele Teile selbst gemacht! Gute Arbeit und wunderschönen Sound! :-)
EPIC!! Thx for your fantastic hard work and brilliant engineering ; )
You can see all the information under "SHOW MORE"
This builder is the real deal. From aerodynamics to hydro dynamics to electronics...he knows his stuff. Can’t believe he’s still at it.
полно ошибок у твоего билдера , как в аэрогидродинамике, так и электронике . задачи просто не стояло сделать лучше -))))
Congrats Jorg ... what I like also here is you don't have to hide your setup :) lol good luck to those whom try to replicate... that's some serious knowledge and craftsmanship! Hats off to you! Jmscard from OSE.
So far there are only 2 people in the world who manage to drive over 300 km/h. Jörg and Arne are a joint project. Everything was self-built, calculated and developed. Take a look at the first video of Jörg with his 8S rigger, there I gave a very precise setup and logs are under "Description".
damn thats fast. good job on the boat. the thing just sat perfect on the water.
Irre! Ich bin seit vielen Jahren Motorsportler und nicht mehr leicht zu beeindrucken aber diese beiden Läufe waren der Hammer!
Respekt für die Leistung und Arbeit die dahinter steckt!
Da wäre noch mehr drinnen gewesen. Leider war der erste Run von links nach rechts nicht optimal. Bin mir sicher das Jörg mit dem Boot die magischen 300 Km/h als offizielle Wertung knacken kann.
HOLY.....COW!!!!!!! AMAZING WORK!!!!! 👍👍👍✌️
Riktigt jäkla grymt jobbat! Själv siktar jag på en av världens snabbaste bil i skala 1/8..
Lycka till med dina projekt.
Waho extraordinary, very fast boat 🛥
Daaaamn!!!
So freakin fast!!
Fantastic video 👏👌♥️
Even before lipos were used in boats much 20 or so yrs ago they had already topped what nitro motors are capable of. A 2 stroke on nitro is doing all it will ever do, electric is still just getting started but this guy is close to max ide say. I had a 30inch cat in the day with about 50volts and a motor big as a beer can. Batts weighed almost 20lbs back then. Good for roughly 60mph
Man, that is wild 👍. Great stuff man.
INCREIBLE!
Congratulations! Really cool boat! Probably the best design of speed boats in the whole web. I wanna try the same with rocket engine-)
A guy built one with a rocket motor, and went over 200mph, smaller boat than this one.
Awesome
Nice Video awesome :-) Iam waiting for my Bullet V2 :-XD Lg from Bavaria
272 feet per second...😲 Astonishing!
Oh man das ist heftig !
Hatte damels mal überlegt einen Lehner motor für mein RC Auto zu Kaufen, aber damals hatte ich das nötige kleingeld nicht.
Und so wie ich das sehe würde wohl selbst ein 1520/8 die serien antriebe zerstören :P
Gute Arbeit!
PS: Mir gefällt die Mosfet endstufe für den ESC ;)
AMAZING!!! 👏👏👏
The Topspeed from this L8 Rigger is over 300 Km/h.
whatt...the.....its like a fighter jet flying over the speed of sound... incredible..
WOW! That is insane!
Dang! I bet the little guy inside the cockpit shit his pants.......multiple times😨
P&Wengineering that was the roostertail you were seeing. his ass never shit so hard.....
LOL LOL SO TRUE !!!!! THAT'S CRAZY !
Right on ! That thing is awesome. You get five R's from me on this build. 👍🏻
Unbelievable!! :-) it's like a tow guided missile awesome :-)
That's fast 🤙
Hi. Do you have any details of the ESC? I want to build one for a car. Did you modify an existing ESC?
This boat is from Jörg M. I have no details of the ESC. All details from Jörg are under "Show more".
ESC: eigene Leistungsendstufe aus 42 Stk. IRFS7434-7P FETs mit Schulze future 18.xx Controller-Platine
Sweet Juice!
Das ist der Hammer. 😂👍👌
Jo
Sau gail
Eine echt schöne Demonstration, sehr schön die Technik , die hier mal einzeln vorgeführt wird. Gratulation, nur noch schöner , vielleicht ein Punkt beim Knacken der 300, zeige doch bitte die Original gelbe Schautafel für deine Geschwindigkeit.
Hier ist die offizielle Seite mit allen Ergebnissen und Rekorden !
rc-saw.de/news.php
Mehr Video-Material und Informationen standen mir nicht zur Verfügung. Der Fahrer / Entwickler und Besitzer des L8 Riggers ist Jörg M. vom JAG`s Team.
I would pay top dollar for some of the useful information this guy has accumulated from his modeling career, you don't attain those kinds of speeds thru luck, and did anyone notice how he didn't use motor wires, they were what looked like brass plates connecting everything together, makes sense because the wire would probably not tolerate that heat too well, there was a lot of useful information just in the pictures of the running gear...
he`s on Rc Raceboats.de
forum sometimes.
Randolph Catchot
Looked to me to be gold plated.
hi. could you please tell me what material did you use to build it?
Sorry, but that is not my rigger.
Mojtaba M That is almost guaranteed to be built out of carbon fiber or a similar composite material.
😲👍👍👍👍👍 wow
OMFW that thing is fast.
wow !!! awesome
The new record with this rigger is even more impressive, over 300 Km/h.
What bearings can handle these rpms?
Encapsulated steel ball bearings. Lehner (LMT engines) also installed steel ball bearings. Up to 50,000, I have also installed plain bearings. The bearings are kept constantly checked and replaced more often.
Wowo
How many rpm?
Everything is written under the video. 63900 rpm and by a jump 70000 rpm.
Und ich machte mit 112 kmh auf dicke Hose...Respekt!
Propeller JAG's C2044/3 What Is The Diameter?
I suspect: 44 mm diameter; Pitch 2x44 = 88 mm; 3 blade
What is the horsepower and weight of the engine?
Just read the description below the video, there is everything about the boat.
This thing is so fast, the camera guy lost track on the first run. Lol
Unreal rpm.
holy shit
De que capacidad es speed control? Amper ?=
ESC de fabricación propia con 1000A de duración.
So how the whole saw is done , do you guys get sponsors or everything is on the owner of boats expense, if not feel you guys can dedicate or have website by now since these events or annually, need to show case it better to get more people especially around the world more involves, my side of the world the sport is very big here I have tfl zonda one fastest ATR boat out the box and I also have 2260/5 with 500 amp speed controller I am very interested in these events
There is a page on the internet where all the rules are "rc.saw.de".
The competition is mainly financed by the entry fees of the drivers and a few sponsors. Anyone can take part if the boat obeys the rules.
What the hell is that. Wow!!!!!!!!!!
Wo genau ist das Leute? Super geil.
Dieser Topspeed Wettbewerb findet jedes Jahr in München statt. Austragungsort ist die Regattastrecke. Zuschauer sind willkommen.
Hier noch ein Link zur SAW Seite wo die Termine rechtzeitig veröffentlich werden. Auf jedenfall ist es immer zur Oktoberfestzeit. rc-saw.de/viewpage.php?page_id=5
Look at that: th-cam.com/video/DvTpkAt3tnE/w-d-xo.html
The same boat this year ( 2017 ), over 300 km/h !!! 314 Km/h avg / Top 315 Km/h
full video ofrc out rigger please bhaiya aaj bez de
Make sure there is no one swimming 🤕
This is an official event on an Olympic Regatta circuit. There are no bathers.This is how a Ragatta track looks. The area is completely fenced.
th-cam.com/video/yyjdEdrnHZw/w-d-xo.html
Waardeloos
2280kv of your motor??
1973 kv Lastdrehzahl = Lehner 2260/5 2Poler
can you show me some picture about your boat. i realy want to see around, under the way you set up prop, rudder systems. it must so perfect
That is not my boat, the owner is Jörg M. from the JAG`S Team.
oh tksss
Wen the vvti kicks in
From 30000 -70000 kv :-)
WTF !!!!!!!!!!!!!!! wow !!!
Why have a superimposed cockpit at all? Scaled-up this would be about 150 feet long.
No, it wouldn't.
@@lapdog1479 Why wouldn't it? The narrow cockpit clearly suggests a one-person craft, maybe two in tandem, so scaled-up I still say it would be about 150 ft long from the front of the sponsons to the tip of the tail section.
Houses electronics, they have to go somewhere ya know😂
Hi, könntest du mir die Pläne geben, es für mich zu bauen?
Der Rigger ist vom JAG`S Team entworfen und dafür gibt es keine Pläne und er ist auch nicht käuflich zu erwerben. Das Komplette Setup ist aber unter "Mehr Anzeigen" veröffentlich.
Motoren technik Typ:3260/5
LMT 2260 / 5 (2016 / 2017). Currently I don't know if this engine is still installed.
WhatsApp motor and esc used in this boat?😳
Here you can find all information.
th-cam.com/video/Fr7D9_V4UZs/w-d-xo.html
You can see the information in the video or under "Remarks" below. In the comments I have already written the same answers several times.
Evry fast
Price ?
Invaluable, self-built.
i think 10k€
Tell jorg send me one those rigger I have the motor already 2260/5 and custom made 2265/4 beautiful motors
Jörg doesn't build or sell boats.
@@fast-rc-boats so who made the rigger had to be someone on his team he have to pass on the knowledge lol
@@rickyoni I only think that the JAG's team consists of 3 people "Jörg / Arne / Gunnar". These 3 people develop and build everything themselves that is necessary (Esc propeller hulls, etc.). Nothing of the in-house developments is sold or built for people. I can not say more about that. SAW is just like Formula 1.
th-cam.com/video/2iYJIrRxa24/w-d-xo.html
Try to find out something about "Tyler Garrard". He is from the States and has already been here in Germany to take part in the SAW event. Tyler also knows Jörg very well.
i think you mean 177.335mph not 177,335 mph, because if you vehicle was going 177,335 mph, your beating most space craft heading to another planet.
In most of Europe/most of the world, we use comma (,) as a decimal marker.
well that i bet causes issues
Not really.
Usually you just use common sense.
the whole world uses , for deicmal.... exept maybe 3-4 countries lol
According to de.wikipedia.org/wiki/Datei:DecimalSeparator.svg
the (.) beats the (,) as the decimal separator by population using it. But definitely in the English speaking world and scientific publications the (.) is the standard.
However, I am from Germany so I am quit used to the (,). ;)
🤣🤣🤣🤣🤣🤣 Thats sick 💪👍
Farouk
Wait. WHAAAAAAT!!!!!!!!!!????
Tell jag I interested in 1000 amp esc
Not for sale and not manufactured.
@@fast-rc-boats Really sad...
@@RBAERO You may try a Castle XLX2. They're just too big for this outrigger.
I want this
Me too :-)
Tell jorg send me the specs of his rigger lol
Jörg will not send a plan of this either. All technical information can be found with the videos (mostly with the first video). Take a look at the playlist.
@@fast-rc-boats I have the motor and esc already I have a 2260/5 with 900 amp esc continous, I don't want the same hull just want the length size of his rigger, I have rigger but might be to small for all this power
My esc custom mod esc with custom firmware
@@rickyoni This information is all and more in the description. I always write everything I know about it.
Boot: JAG's T Hydro 2015/2016, ca. 125cm lang, ca. 55cm breit, ca. 3.4kg fahrfertig
Motor: LMT 2260/5 HiAmp (mit 8mm Welle und Rotorhülse)
Regler: eigene Leistungsendstufe aus 42 Stk. IRFS7434-7P FETs mit Schulze future 18.xx Controller-Platine
Akkkus: 8s1p RoaringTop 5100 80C, vorgewärmt auf ca. 45°C
Kupplung: Zander 8mm/2.5mm
Propeller: JAG's C2044/3
Fernsteuerung: Graupner X-8N mit GR-16 Doppelantennen-Empfänger und zwei 30cm Antennen
Empfängerakkus: SLS XTRON 2s 335mAh
Servo: MKS HV 747 fürs Ruder und MKS HV 6100 für die Bremsklappen
Hardware: 2.5mm Federstahlwelle mit JAG's Strut und JAG's Ruderhalter (hergestellt durch MBP-RC), Ruder aus Messerblatt
Datalogger: SM Modellbau Unilog 2 (mit Eigenbau 1500A Stromsensor)
The length and width as well as the weight are also given here.
That is dumb fast and I thought I was the shit with my traxxas m41...back to the drawing board I go....
I neither herd nor saw a sonic boom, not accurate speed, fast af tho
aodan farlow that's because it didn't do 767mph (speed of sound).
BootsInShoes there was a comma in front of the 177, i know it was a typo tho
haha. gotcha.
BootsInShoes lol, over 177,000 mph is kinda unrealistic😂😂
Especially since the fasted recorded man made object on Earth was the New Horizons rocket at a little over 36k mph. Hell, the ISS is doing around 17k mph >.>
ll
v
W T F
thats 285.393 KM/H because I'm fairly sure nothing goes 285,393.0 KM/H over water let alone on land...
In German: '.' - thousand-separator and ',' - decimal mark.
This is an official competition. The measurement takes place over 2x100 meters with light barriers. The accuracy must be at least 1/100 s.
Nice info, but that's not what the comments above are about.
MrUneducated seriously?!
177,335.00 miles per hour...or does somebody not know how important the difference between a comma and a period. just shaking my head.
They are in Europe... most likely Germany. They use a comma instead of a period. For example 120.5 mph would be 120,5 mph. So, the 185,756 is actually 185.756mph to us. The answer from "Pat Patterson" is already 2 days old.
the whole world uses , for deicmal.... exept maybe 3-4 countries (that are NOT 3rd world countries) lol. please don't tell me you never heard of that? just shaking my head.... get some education moron
All i know this boat is more faster than my boat....hahaha...
Slow
This Video is from 2016 with 285 Km/h avg. 2017 run the rigger 314 Km/h avg.
Electric is for people that cant tune nitro !!!!!!!!!!!!!!!!!!
And nitro is for people that can't tune electric !!!!!!!!!!!!!!!!!!!
Ich habe beide Varianten schon betrieben. Am Anfang war es auch Nitro (RC Car / Boats) bevor ich dann auf elektrisch gewechselt habe. Tatsache ist das bei elektro schon sehr viel Fachwissen nötig ist. In diesem Boot ist alles Eigenbau bis hin zum ESC Regler der 1000 A aushält. Viele Boote wo auf meinem Kanal zu sehen sind gibt es gar nicht zu kaufen, da es überwiegend Eigenbauten sind.
Electric is a lot faster than your old time nitro motor
Nitro is a joke it's for people who rather work on them then drive them
@@maddmavic Nitrous has nothing to do with this conversation.
And for people that want to go faster than nitro.
@rcboat68 #Rcboat68