Wltoys K989 Drift Project EP3 7 Ways How To Lock Rc Diff For Drifting Or Slip Differential Problems
ฝัง
- เผยแพร่เมื่อ 24 พ.ย. 2017
- Wltoys K989 1/28 Rc Drift Project Ep3:
7 Ways How To Lock Rc Diff For Drifting Or Slipping Differential Problems and by locking the rear differential the Rc car drifts ten times
The 7 ways How To Lock Rc Diff using household products for locking rear differential and Rebuild for a consistent level of torque going to each wheel
Slipping differential problems can be fixed too by a diff lock
Rock crawler and Rc drift cars use it the get better traction and a more consistent driving car without shifting the torque from wheel to wheel constantly making the car lose grip and spin out most of the time
Locking your diff is a necessary upgrade you need for drifting and there are 5 ways to stop your differential spider gears from turning
Starting with the easiest method number one is using art clay and stuff it in between the gears until the diff is full it's not a permanent solution
The second method is using hot glue to block the gears from turning both ways work but not 100% perfect there is still a little bit of play inside the diff
The third and best way is using epoxy to lock the diff forever with plastic gears if your Rc diff has metal gears you might like to try JB.WELD ore two-component metal epoxy
The four method is using body clips to stuff in between the spider gears teeth until they stop moving around that can be a bit tricky
The fifth way is the official way by using a diff locker that replaces your gears with a solid piece of U-metal that makes your Rc diff lock up or if your lazy you buy a solid lock diff
For Sale at Banggood
Spare Diff: goo.gl/yj8ZXQ
Wltoys K989 Rally Car:goo.gl/mk3rz4
Wltoys K969 Rc Drift car:goo.gl/6j3rS7
This is How To DIY Rc Drift Project EP3 wishing you a lot of Rc Fun
Hope You Like this Video & Subscribe:goo.gl/GmzhdD
If you have any Questions then leave them down below!
Music by Brandon Liew:goo.gl/GmzhdD
all the links in the description are affiliate links
You don't have Pay extra... it's still the same old price!
It just helps to pay the channel bills... Thank you for your support :D - แนวปฏิบัติและการใช้ชีวิต
Locked the diff on my Mini-Q. HUGE difference in drift.
that and a front one-way are totally game changers, and locking the back diff is easy, as seen here.
Excellent vid.
Oh a Mini Q that's a fantastic little car that shut drift better than my car with all the possibility's you have to change toe and chamber looking forward to seeing your vids :D
Great video! Locking diffs rocks, not only for drifting or crawling :)
Thanks Remote Addicted locking diff those rocks ya! It improved drifting by a hole bunch
But what more do you have? than crawling drifting and berhaps a slipping differential
Great tips. Thank you.
:D
Another great tutorial and tip. It's great that you offer many solutions for this MOD. I really like the Art Clay method as it's not permanent, so if you wish to undo the MOD you can. The Art Clay is also easy to find. Keep up the great work and Happy Driving!
Apriciate the comment thanks Ground Control RC
Art is also very cheap and a lot of people like to use that method because it's not permanent but your going to destroy the gears teeth anyways so bash it untill it slips and than lockt it and buy a new one for racing or just normal driving but i like how my cars drive with lock diffs
Maybe that's why i choose epoxy hahaha
Interesting vids.....keep them coming
I do my best E Will thx for watching and leaving a comment thx 😃
Awesome video! Building a dragster and came across your video. Definitely using 2 part epoxy to lock mine. Keep up the great videos.
oh cool love dragsters always watch street outlaws maybe i shut start building one too
thx for commething thx :D
Thanks for the video
thx for the comment
WOW. such a small repair. Not sure if my hands are small enough to do this work..v lol.. Great video bud. I don't have one of these rigs. but I do enjoy watching the work you do on it. Very entertaining. Thanks for sharing.. :)
Thx for watching and leaving such nice comment very much apriciated rcnikster
It is a very figgly job on this mini differential but it improved drifting making it super easy and worth the trouble hahaha
Nice video :)
Kacper Duc thanks mate 😃
Awesome job bro great vid. I would get glue everywhere tho bro 😂😂😂🙈
hahaha :D
Epoxy! I've never thought of that. Partly because I usually lock it temporary or just use super glue because I always have one lying around.
Hi Beaver's Hobby super glue is good too and very common to have that's why we showed in the vid
personally i like epoxy because it's becomes almost unbreakable
Thank you for your comment 🖒
pro trick : watch movies at Flixzone. Me and my gf have been using it for watching loads of movies recently.
@Junior Jason definitely, I have been watching on flixzone} for months myself =)
感謝分享的說，馬上按個讚的說
Thx 專情の夕垌凼姬 for watching and leaving a comment 😃
Used clay to lock it up and it worked great a lot faster than using jb weld or anything and it’s not permanent also I only did the rear I like the front being open for better turning
yoyur right if you lock up the front and rear the cars almost wont turn
Nice work~
"11" Like~!
Thx mate try to include as many ways as possible to lock your diff with Comm'n household products that most people while have laying around the house to start modifying their diffs to improve the car handling for drifting crawling or burnouts and bashing
thx for the comment and watching of course :D
cool :)
Thx Thijs RC
I have been looking forward to the continuation in this series,the Epoxy is no doubt the best option considering the Sino metal diff doesn't fit.
Looking forward to seeing the long wheel base mod and seeing it run. Will you do before and after clips of how it performs?
Thanks, keep up the good work friend!
Hi MrE yes epoxy is the best and my favorite way of locking diffs
I shut do a before and after but the vids are becoming way to long you just have to believe me when i say it's a good or bad upgrade
I did upload a test drive of a battery upgrade with a 4min of drifting going live in a few weeks hope that while satisfy you
Ofcourse I value your opinion and trust it,looking forward to the video of drifting with the upgrades!
Thanks! I think I will try the super glue method because the diff on my latrax teton is slipping to the point it wont move.. But, Thanks! 👍👍
cool just stuff it full and let it hard out real good
Can you do this whole series of mods with the k969 too?
thank you. had thought of the playdoh, so if i woul change my mind could go back to diff, but wasn't sure if it would work.
U have some good steady hands those spider gears r so small I would have to use tweasers lol 😂 ur eyes must be good too
eye's of an eagle come in handy with these nanogears thx for your comment :D:D:D
They need to make limited slip diffs for rc.
haha yes they can but at what price hmm big do for sure
Arrma has done it now
Fantastic vid my friend, why do you lock the diffs ?🤔 Liked and subbed you my friend. 👍😊👍
to make the wheels drift the same way every time no matter what wheel have more grip or not :D
How To DIY Rc , would it make it have more exhilaration and speed 🤔 thanks for getting back to me my friend 😊😁👍
@Tonys Rc Tech no! But it makes both weels spinning at the same time, even if one has no contact to the ground.
A differtial let’s one wheel spin at a different speed: if you do a right hand turn, the left wheel needs to spin faster, because it has to go a longer way than the right wheel in the same time.
If the diff is locked, both wheels can only spin with the same speed wich results that one wheel is always sliding a little when doing a turn.
But that means, that if one wheel has mo contact to the ground , the motor will only power the one in the air and you can’t go forward. That’s where the locked diff helps: it makes both wheels spin, even if one is lifted up and has no contact to the ground.
Conlusion:
if you drive normal with a lot of turns, you should keep the diff!
If you do off-roading and especially rock crawling you should lock the diff!
I hope this helped you! Greetings from germany and sry for my bad english 😊!
Hello vriend, can you tell me where to find the metal locked one in your video. Danke
THIS IS THE LINK bit.ly/K989_Metal_One_Way_Diff
Make sure to replace your dog bones with metal ones after you lock your diff if you plan on drifting. I've snapped two in one day after I locked mine and drifted.
thx for the tip but we already did that :D
where can i buy such?
but what if my diff is broken it just slips when I accelerate, can I just drill screws in it from both sides? does it work?
no best to open it up and fill up with epoxy
should i lock both front and back? or just the back? or just leave it? i got a 284131 and its kinda tight but idk what locking it will do
Only in the back in the front you can use a 1 way diff upgrade
@@HowToDIYRc could i leave the front one open or would i need a one way diff up front for stability?
Nice video, i was thinking about trying this out when my diffs get worn out, but won't it mess up steering? (I have a 1:10 scale monster truck) it could be a good idea to do this while trying to drift it
i don't recommend locking the front differential except for a rock crawler but in the rear... for sure even with my buggy to drift in the dirt and snow
How To DIY Rc okay, i think i'll try to lock the rear differential when its worn out, and also, from what country are you?
i'm from the netherlands and you?
I'm also from the Netherlands, i thought i could hear it a bit in some older videos :)
relaxt waar precies?
I locked the rear differential BUT it seems as soon as i throttle the car spins out of control. Any helps or tips?
i think one the screw holding one of your axles is loose...
hold the car in your hand and rev the motor and look if all 4 wheels are turning you probably find one tire is not spinning...can you check this for me Sir?
will see this tonight. I used hard mouldable plastic inside the diff so that there is no movement. When i moved the rear tyres they both moved together implying the diff is locked but i will have another look at it.
I think you have to lock both the differentials .. front and back
@@ElbaDroneitno no just the back, if you lock the front, turning will be harder
should I lock my front diff for drifting?
No. You want front traction and for the tires to spin at different rates for getting you through corners. The rear diff should be locked so any rear wheel spin will always be both rear tires reliably.
where can i buy that locked diff for k989? link? thanks!
you cant just ollow the tips in the vid
@@HowToDIYRc yes, but other channel tell me that i can buy the diff locked in aliexpress for example
Rear lock & front open ?
Yes or front one WAY DIFF
Great advise !!! Please loose the music I can't hear
shure next time thanks for the tip
Is it better to lock the front diff too.? I know it's better to put FOW, but I just wanna save money as much as possible 😂
no if you lock front diff too the car have big problems to make a turn check this vid th-cam.com/video/rjczglh5T9k/w-d-xo.html first 4 wheels drive car in the world made in holland makes me proud im dutch :D
@@HowToDIYRc AHH, okay... Thanks for the information.. I just think that I must lock the front diff too because my old RC drift have FOW and it's locked..😂
They are almost all pemanent and u cannot reverse the process
Can you put a rear diff in the front
depence on the rc car sometimes they are the same
like in the wltoys k989
How To DIY Rc I have a a959b i did a brushless 4300kv and want to lock the front up think I can?
?
yes but keep in mind this creates understeer
i recommend only locking the rear diff except crawlers they need lock diff front and rear
what's the benefit to block the differential?
several benefits for drifting and driving offroad and crawling
with drifting you want both wheels to spin the same way everytime
offroad you have more grip if one wheel losses grip than the same amount of torque go's the wheel with grip giving a chance to drive out the hole
crawling you have a lot of trouble to keep all 4 wheels on the ground and the wheel that is hanging in the air get's all the torque and to fix that problem you lock the diff
You shouldn't totally lock the diffs on your rc truck because that will put lot of load on the gears and blow it
its oke the gears are locked!
can an locked diff be unlocked?
Yes if you use clay or metal pins but if you use epoxy its locked forever
@@HowToDIYRc better just to replace with open diffs just bought a k969 and 2 diffs. when i get the car i will check to see if one can be unlocked if not thats ok.
Eeepooxy
:D