everybody talking bad about the lack of ultimate precision has never worked on old machinery, lots of shims to get tolerances right.....and given that these cranks are for large compressors, even the throw angles can be off several degrees and still work fine
For the price of a pair of safety glasses, is it really worth losing an eye and being left unable to work and provide for your family?.... The management of this company should be ashamed to allow it's employees to work without even basic safety protection.... To put this video on TH-cam for the world to see is just beyond words.
I’m already surprised to see they are wearing sandals instead of being barefoot… and then these sleeping gowns they wear, if it gets caught in the lathe…
I’ve talked to people online who work in shops like this in these countries. They won’t even let you send them free safety glasses. I think there’s a lack of proper safety culture, and honestly I don’t think anybody who isn’t there and in the middle of it can actually change it.
I am glad that you showed such interest in this video. Thank you. Actually, this man uses their specific measuring instrument for getting the precise position. But that is shown less in three video, may be you got skipped that part.
On a crankshaft, measurements taken without at least a micrometer will soon cause the engine on which it will be installed, many problems... or at least a shorter life.
This is agreed. But here this man manufacture crankshafts for different machines used in factories and mills and they had done it for more than 40 years and they got zero complaints up-till now. So these are experts in what they do and had got a super master skills. Also they do take measurements on different compasses and micrometers. There job would be incomplete without these measuring instruments. May be you have skipped that part of measurement of crankshaft in this video.
I wonder how many times they have had a crank jump out of the lathe, especially when cutting those big end journals. The weld holding that flange at the tail ought to be , er more substantial !
Lol I want to see you walk from your hotel to a Cafe in Pakistan without soiling yourself. You're spoiled. You're right, but the fact you made that comment means you know nothing of the world outside your sterile environment.
Lol, you think they only make one a day? Look at the actual bench faces and cutting heads, they are all in good condition and oiled, even I they are older than both of us put together. I would guess they are on per piece rate, so fluffing around to make yourself feel better is an expensive hobby when you could be knocking out the next part. Dont worry the swarf will be collected for scrap and in the crucible by the time these guys are having breakfast the next morning. @and9290
Все це робиться без часових індикаторів,мікрометрів,без подачі СОЖ і термічки.Ще й сплав невідомий марки ХЗ.Правда гаряча ковка заготовки присутня.😂 PS:статичне і динамічне балансування теж не проводять.Для парового двигуна згодиться.
Seems like you have got good information regarding making of crankshafts. Here in this video the crankshaft is measured and a sketch was drawn before the process. This expert man use different types of measuring instruments during the manufacturing process of crankshaft. The supplying of coolant inside crankshaft takes another process and that is not covered in this video.
Сталь как раз таки нормальной марки - они режут заготовки из колена от большого судового двигателя. А вот к технологии мехобработки есть вопросы. Но это колено скорее всего пойдёт на какую-нибудь водяную помпу или что-то подобное. Так что сойдёт...
Ok result apart from lack of PPE, but theres no way that key is on TDC. Should clean up crank cheek faces in slotter prior to alignment of slotting keyway. And hows the drilling of the end of keyway in pedestal drill, wonky & on the piss.
I wonder how many times they have had a crank jump out of the lathe, especially when cutting those big end journals. The weld holding that flange at the tail ought to be , er more Sunday!
![ทางเดินชีวิต - ธีเดช ทองอภิชาติ x อ.ไข่ มาลีฮวนน่า [Official MV]](http://i.ytimg.com/vi/1f3wcG16dd4/mqdefault.jpg)
The most modern factory in the country you should see what the old factory looks like
Working in flipflops!
Flip flops approved by OSHA and EPA😩😩😩
It's called freedom. What we no longer have in the American work force
everybody talking bad about the lack of ultimate precision has never worked on old machinery, lots of shims to get tolerances right.....and given that these cranks are for large compressors, even the throw angles can be off several degrees and still work fine
They can also make of few pieces like motorbike carnks, no? That makes the work easier
For the price of a pair of safety glasses, is it really worth losing an eye and being left unable to work and provide for your family?.... The management of this company should be ashamed to allow it's employees to work without even basic safety protection.... To put this video on TH-cam for the world to see is just beyond words.
I’m already surprised to see they are wearing sandals instead of being barefoot… and then these sleeping gowns they wear, if it gets caught in the lathe…
Don’t forget it is an islamic land, if something happens it is not due to their lack of common sense but it’s faith, the will of Allah…
That’s on them. If they want there eyes they will protect them. Have money for Bluetooth in there ear. You can’t teach common sense.
I’ve talked to people online who work in shops like this in these countries. They won’t even let you send them free safety glasses.
I think there’s a lack of proper safety culture, and honestly I don’t think anybody who isn’t there and in the middle of it can actually change it.
It’s India/Palistan where labor and life is cheap. They wear safety squints and sandals, don’t you know?
Always good to see clean, well kemp equipment.
Thank you sir for your love
@@Pakistani-Hands😮
@Pakistani-Hands not too keen on sarcasm, I see...
Safety spec sandles amongst those mountains of swarf on the floor clearly works good 👍 steel toed boots are for panzies
That’s what Ive been SAYING
Nice work amazing my friend ❤
Наверняка у них тапочки из жаропрочных материалов и очки 👓 излишне на токарке😮 . Просто жесть.
Amazing 👌🏽👌🏽👌🏽👌🏽
Awesome oxy cutter man
Thanks for appreciation
OSHA would have a field day showing up here. They would levy enough fines to put all their kids through a machinist apprenticeship program!
@9:00 I heare all the forged fibres of steel screeam at once in pain.
Thanks for being here
Admiro la mecanica industrial. !😮😮
Thanks for the love
Very fascinating work
I wonder, I haven't seen any indicators or calipers in the whole video, how do you still achieve the needed precision?
I am glad that you showed such interest in this video. Thank you.
Actually, this man uses their specific measuring instrument for getting the precise position. But that is shown less in three video, may be you got skipped that part.
Весь пол усеян стружкой. Рабочие в открытих шлепанцах с голыми ногами. О ТБ никто не слышал это точно.
I see the cleaners have not visited for a while !
Haha. Actually this man clean the workshop after single crank manufacturing.
They're at lunch with the OH&S rep.
Font un travail admirable et formidable. Chapeau bas
Thank you brother. Thanks for the appreciation
Agora sim, vi um vídeo clássico e prático.
How about sweeping up occasionally?
On a crankshaft, measurements taken without at least a micrometer will soon cause the engine on which it will be installed, many problems... or at least a shorter life.
This is agreed. But here this man manufacture crankshafts for different machines used in factories and mills and they had done it for more than 40 years and they got zero complaints up-till now. So these are experts in what they do and had got a super master skills. Also they do take measurements on different compasses and micrometers. There job would be incomplete without these measuring instruments. May be you have skipped that part of measurement of crankshaft in this video.
Probably running on poured white metal bearing, blued and scrapped to the shaft
I guess precision is way overrated.
LOOK AT ALL THE METAL SHAVING THE SHOP IS A PIG PEN AND THE EMPLOYEES WALKING AROUNG WEARING SANDALS
I wonder how many times they have had a crank jump out of the lathe, especially when cutting those big end journals.
The weld holding that flange at the tail ought to be , er more substantial !
These men doing this job since years. But never happened that the crank jumped out of lathe machine, never ever.
Браво!!! 😃👍
A great job well done. It should be cleaned on the ground 😁😁😁
Yes, thanks
You don't need hi tech equipment to keep your shop from looking like a junkyard.
Thanks for sharing your observations but this workshop owner make it swipe after one complete machining process.
@@Pakistani-Handscomplete BS, the lathe was full of swarf before he even started.
Lol I want to see you walk from your hotel to a Cafe in Pakistan without soiling yourself.
You're spoiled. You're right, but the fact you made that comment means you know nothing of the world outside your sterile environment.
Lol, you think they only make one a day? Look at the actual bench faces and cutting heads, they are all in good condition and oiled, even I they are older than both of us put together.
I would guess they are on per piece rate, so fluffing around to make yourself feel better is an expensive hobby when you could be knocking out the next part.
Dont worry the swarf will be collected for scrap and in the crucible by the time these guys are having breakfast the next morning. @and9290
Who brought in the white guy with the torch??
Wow Mechanics1
Thanks for love
This is how we treated people once now in Pakistan at some point they will rise up and say no hopefully 😢👍❤
CES TOURS ONT PLUS DE 100 ANS , LUBRIFIIEZ L'OUTIL DE TEMPS EN TEMPS, SA VIE SERAS PLUS LONGUE
Thank you brother and your suggestion will be considered for sure.
Great work thank you!
Glad you liked it!
Great work? Realy? XIX century.
It's like a train wreck. Hard to watch but impossible to turn away
Thank you for sharing positive vibes.
Barokalloh for everybody
He notado una falta de engrase en todas las fases de acabado , y aún así parece ser que éstos cigüeñales trabajan a bajas R.P.M.
10.20min.if the tough pulls back his foot, must be very hot! Bet the bar he put the foot on, have had more than 200 degrees
..
And what cannot be planed off is then polished with a grinder. It then fits better.
And a candlestick as a dial gauge 😂😂
Neanderthal Men at work.
Все це робиться без часових індикаторів,мікрометрів,без подачі СОЖ і термічки.Ще й сплав невідомий марки ХЗ.Правда гаряча ковка заготовки присутня.😂
PS:статичне і динамічне балансування теж не проводять.Для парового двигуна згодиться.
Seems like you have got good information regarding making of crankshafts. Here in this video the crankshaft is measured and a sketch was drawn before the process. This expert man use different types of measuring instruments during the manufacturing process of crankshaft. The supplying of coolant inside crankshaft takes another process and that is not covered in this video.
Короче делают, как попало ...
Им бы на Украину съездить, и поучиться как правильно термичеть ... 🤔
Сталь как раз таки нормальной марки - они режут заготовки из колена от большого судового двигателя. А вот к технологии мехобработки есть вопросы. Но это колено скорее всего пойдёт на какую-нибудь водяную помпу или что-то подобное. Так что сойдёт...
Now off to get heat treated or induction hardened no doubt, wink wink.
These people are 100 years behind.
THANKIOUPR❤❤❤❤❤❤❤❤❤❤❤❤❤❤
Obviously cleaning up is never an option for this type.
Wielcy mistrzowie
Ну почему немцы никак не могут до этого додуматься? Дешевле было бы.
Germans needs to hire such talented and multi skilled people
헤이딜러...차 사길때는 훨 기스니 뭐니 고무바킹 다보고 차 타면서 문짝 범버 교환 안해본 사람 몇이나 된다고 이거 빼고 저거 빼고 금액 확 후려놓고 팔때는 중고니까 이정도는 감수하시라고 하고...상사랑 뭔차이? 요즘 상사만 가도 사고내역 다나옴. 견적도 차이 거의 없음. 그냥 상사나 가까운 매장 가시는 걸 추천함!!
Tirei o chapéu foi pra esse corte com oxiacetileno de uma chapa de mais de 15 cm
Thank you brother for showing interest in our content. Hopefully you would like our upcoming videos too !😀
I thought I had it tough some of the places I have worked.
النظام أساس العمل .
Glad thats not a crank shaft for my equipment!, THATS A Piece OF SHIT,!,,
How can they walk around in sandals with all that swarf on the floor?
They are practiced to it.
So they don't fancy balancing that crank 🤔
Ok result apart from lack of PPE, but theres no way that key is on TDC. Should clean up crank cheek faces in slotter prior to alignment of slotting keyway. And hows the drilling of the end of keyway in pedestal drill, wonky & on the piss.
Labor is cheap, why don’t you get the kid to shovel out the floor?
You are right but the floor is shovelled after one complete session of machining.
@@Pakistani-Handsstop saying that, it's not true.
I wonder how many times they have had a crank jump out of the lathe, especially when cutting those big end journals.
The weld holding that flange at the tail ought to be , er more Sunday!
It looks very dangerous. The oxy ace guy was probably the smartest guy for wearing boots!
Yes because that guy’s job was too dangerous without having shoes
👏👏👏😎👏👏👏
Accuracy is not import
Accuracy is their priority
walking around barefoot in piles of chips..? you got a lathe, but no boots?..
These people got practiced to it and now they don’t take care of it. It is their daily routine. Else your suggestion could be considered
Вокруг такая грязь, сами грязные,чумазые. И как вы думаете, может ли что-то нормальное выйти отсюда?. Не знаю...
Kis city sy ho ap
Kpk se
Paint your wall much better🙂
Your suggestion will be considered
Itens de segurança pessoal zero
Your suggestion will be considered
The criticism on workplace safety & PPE comes from those same people using phones wearing clothes made in the same environments.
халтура
Такие видео смотрят зачем?
🤔
Я серьёзно спрашиваю, зачем люди это смотрят.
Зачем вы это посмотрели? Для чего...
Как можно быть таким не понятливым, что б сделать коленвал ясен пень..... 🤨🤔
Чтобы было понимание какой труд затрачивается при изготовлении таких деталей