Toyota Sienna 2004 Power Sliding Door Cable & Center Hinge Replacement
ฝัง
- เผยแพร่เมื่อ 16 ก.ย. 2024
- A year ago, I repaired 2004 Toyota Sienna passenger side power sliding door problem. It was a "Lock-Release" system failure. I replaced parts and everything worked OK. But I did not know that at the same time, there were other problems hidden that were much worse than this problem. My Sienna's sliding door was dead for second time. Again, I challenged these new problems and fixed them once and for all.
The parts I bought wre
1)Power Sliding Door Cable Assembly w/o Motor 04-10 Toyota Sienna PASSENGER Side (from ebay, $225.00 free shipping)
2)Genuine Toyota 68380-08031 Door Hinge Assembly (from Amazon $85.09 free shipping)
I learned a lot of things from these site.
1) sheareyourrepair.com (formerly jonfixesstuff.com) by John
goo.gl/b7ccjw
2) How to Replace a Toyota Sienna's Center Hinge on the Sliding Door(2005) by Go Ontryit (TH-cam video)
goo.gl/pbaUnW
Thank you John and Go Ontryit, you guys are awesome.
In my video, I replaced sliding cable and center hinge. You can see how badly both parts were damaged. And also you understand that these repair can be done by yourself.
2004 to 2010 Sienna's parts should be same, so if you own these year's car, this video could be a good hint.
My first video about lock-release replacement video is
"2004 Toyota Sienna Right Passenger Side Rear Power Sliding Door Repair"
goo.gl/TjE9tb
I hope my video will help you !!
Teddy
--------------------------
Toyota Sienna Sliding Door Parts List from Amazon (2004-2010)
amzn.to/2wnf9Ss
Donation welcome!
I appreciate if you fund me for the new camcorder and my next youtube projects. Thanks. Teddy Hashee
www.paypal.me/...
Thanks for covering the actual spool reassembly! Most videos gloss right over this. It isn’t even covered in the new part instructions.
Bro this looks very hard to do, but honestly I didn’t even watch this video first I just figured it out on my own. I went to lkq pick a part learned how to do everything there before I touched my door. I took out the motor and pulley, The plastic pulley came undone and had no idea how it went. But I figured it out in 5 mins. My cable ends near the motor, the cable jacket came undone inside so it was locking up the pulley. It wasn’t nearly as bad like this video. Removed the all the plastic jacket off the cable cleaned the plastic cover regreased the bearings and and motor gear. Works like a charm now. Paid $48.00 for spare motor and cable. Oh yea by the way if your motor is still good and cable is just stuck by the plastic jacket cover, you just need to remove the inside door panel, window snail cover, and the motor pulley.
Great Video Teddy! You were fearless tackling these door issues and you didn't give up even when it still had a problem! Inspiring work. Thank you.
Dave
Hi, Dave. Thank you for your compliment on my DIY repair work!
Very down to earth illustrations with highest honesty so we don’t run into the same disappointment , thanks .!
I learnt a lot today .
Thanks for your videos. My rear passenger sliding door has been broke for years. Being it is a '04 and it is 2015, I was not about to pay the outrageous amount for TOYOTA to fix it. I ended up just making it a manual door since the kids are way out the car seat age. Now I just have to replace the compressed air shocks for the back hatch. THANKS AGAIN. !
+Elisha Vickers Hi, thank yo for the comment, and hope you will be able to fix your car !!
This is the second time I needed to see this video because of similar issues. I'm very impressed with how informative and useful it is. It's obvious that a lot of time and effort went into making this how-to, and I am VERY grateful for it! If I could give this 1000 thumbs-up, I would! THANK YOU!
Hi, Patrick. Thank you for your compliment on my work. I am glad that this film helped you in someway. Also I am glad that your DIY repair work went well!
I love the description, part numbers and cost of all the parts. Thanks! the entire video is well explained and i'm ready to do it myself. Thanks again.
+Marcos Lozano You are welcome ! and thanks for the comment. !!
Fantastic video. I used your video to fix my passenger door almost two years ago. Now its time for the driver side door. Thanks again for posting!
Hi, Russ. Thank you for your compliment on my work. MY car needs another repair at this time too. This time door lock actuator motor needs to be replaced. Hope your repair will go smoothly at this time too.
Hello there, God bless you for putting this video together but I am not handy at all so I couldn't possibly attempt to tackle this job, it's way too complicated.
I will open the sliding door to my 2004 Sienna manually, end of story.
Keep up the good work, I am sure this video (and others) help many people
Thank you for the most informative video on that subject! We were able to fix the cable issue in half of the day based on your video from the first attempt! Appriciate it!
Great to hear that. Thank you!
great video, working on this since yesterday and thought i ordered the wrong part (aftermarket). the black clip and white clip that go under the rear window are swapped/backwards. watched a different video and the guy had the same issue, no big deal just make sure to swap the wires positions on the spool
that was a lot of hard work there no way I can do this your video just confirmed I'm taking this damn thing to the dealer..... great video lots of hard work you did there
HI, thank you for your compliment on my video. Hope your door will be fixed. Teddy
This is a COMMON problem with Sienna's. Toyota knows it should have a recall on the thousands of Toyota's that have this issue. Not worth $1,100.00 to have the bloody door open. I 'll just use the drivers side door. Dammit! : )
Thanks so much for this! Got me through it well and saved me a ton of money. Had a little difficulty getting the window back in, but it works. Nice too have the door open without the grinding.
Good to hear, congratulations!
Very, very, very, very, very good job in the van and in the video to teach step by step, congratulatios, I really enjoy tje video. I just to buy a Sienna 2005 abd ot has the same problem, with you video I hipe to can repair it, thank you for share your knowledge.
Great video - I appreciate giving the lengths of time at the end for each issue😁
I love your videos. this was crazy complete. Everyone wants to fix their own cars but they don't really want to do this much work. Thank you so much
You are welcome! and thank you for the comment.
Thank you very much for this video. I am currently hurdling through this obstacle, but now i am more confident that I will be able to fix the problem and save my family some $ in the process. I love your dedication and persistence, that's what it's all about. Kuddos
Hi Juan. Thanks for your compliment on my video. I believe you will be able to fix the sliding door problems and save tons of money! Enjoy DIY repair work. Teddy
This was AWESOME!!! So helpful. I was able to repair mine today thanks to this video. Thank you so much for posting!!!
Hi, Tim. I am glad that you were able to fix the problem. Thank you for the comment.
Thank you so much, I will try to do this job for 2007 hope it goes well . I like this video that you did from beginning to end and I don't need to jump to video parts to fix the door. just pause and continue .Thank you so much
You are welcome, and hope your diy repair project will go nicely.
Great job. I am surprised Toyota did not make the cable replacement easier. Thanks.
+John Erzen Hi, John. Thank you for your comment!!
I was thinking of removing motor and cable and using door as a manual, thanks for the vid
Thank you for the comment. I hope you will be able to fix the door problem.
You are great! Yes, one center hinge is off on my siena. Thanks for your Selfless kind display. I know it will take me at lest three hours.
Take time, enjoy removing parts one by one. I hope you will be able to fix the door problem.
Great job, I went ahead and bought the hinge at the same time
Dude. U are very well detailed in your work. Awesome job sir...
gr8t job! I had similar problem, I check bottom roller there was a bit piece of rock stuck between roller, I remove, clean out bottom rail, works fine after that.
Hi, Savoeurn. Thanks for sharing your repair information, and thank you for your compliment on my video. Teddy
Thank You--Thank You--Thank you for putting the time into making and posting this. Worked great on our 2006!!
Hi, thank you for letting me know that your DIY repair project went well. Congratulations !
あえて日本語で＾－＾
私も左のスライドドアが壊れて途中まであかなくなりました
モーターは壊れていなそうなので私もキットを買って自力で直させていただきました
大変役に立ちました
ありがとうございました
10年前にアメリカにいた時購入し、に日本へ帰るとき車も日本へ輸送しました愛車です＾－＾
車を大切にしていらっしゃるんですね。素晴らしいです。私のシエナも２００４年ですが、今でも現役で走っています。もうすぐ２０万マイルに達するので、これからもオイルや足回りをチェックしながら可能な限り乗っていきたいと思っています。コメントありがとうございました。
Awesome video!!! I don't have the problem yet but I enjoyed your video! Tremendous work! Love your 🐶!
I did the job in 10 minutes. lol thanks for the video !!! useful info.
HI, thank you for your comment. I'm glad my video was useful for you.
There is no possible way anyone could do this job in 10 minutes.
Hey Teddy... awesome job on this tutorial. I'm doing one tomorrow. You really helped 👍
Hope you do the work well and repair the door!
Excellent video ! Very helpful ! I used it and got my car's door fixed. Thank you so much !!
Hi, Abba. Thanks for the comment, and glad you fixed your sliding door problem. Teddy!
My neighbors sienna won't auto close. Now I know what to look for! Thanks!
I'm glad that you located problem to fix. Thank you for your comment.
Excellent job on the video, thank you for taking the time and effort... very informative and helpful.
I hear you Teddy rebuilding my 72 and it feels great
+Skylark18360 Buick Great work!! Keep it up. Teddy
Hi Teddy,i had the same problem on a Toyota Noah van.Thanks to you i figured it out.Thankyou.
Hi, Robert. Thanks for the comment and I'm grad to hear that you repair the door. Teddy!
Very good tutorial video... but it requires to take down the whole door in order to replace the cable and hinge...
Hi, Sam. Thank you for the comment. It seems like a big job and feel like overwhelmed, but It was not bad. Hope you can fix your problem too!
Wow nice job just so you know if other side breaks Toyota will fix for free,yesterday mine broke the cable and I called toyota customer service not dealership and they said it was under recall I have a 2006 sienna xle with 134,000 and it was still covered Toyota even called the nearest dealership near me and set everything up I just had to confirm what time would be best for me so Tuesday it is all covered very happy so my advice do not call dealership you will get run around call Toyota customer service they will take care of it .
+skylark19721 Hi, Skylark. Thanks for the great info. This side brake repair info will help many people. Appreciate it. Teddy
+skylark19721 Hi Skylark, I think my 2006 is on the verge of having the same failure, is there a TSB to reference? This is a great video, but I'd much rather take it in to be replaced than dive into this level of mechanic work.
Thanks!
+Paul R. call 800-331-4331 that is Toyota customer service and give your vin # to see if it is covered which it should I talked to jomar but you will probably get someone different mine actually broke the cable you might have to wait but it is a recall so you should be good,thanks
+Teddy Hashee Thanks Teddy amazing job for real this video is amazing I am pretty handy also mostly with old cars are my life like pre 1980 lol this I can probably do but why did Toyota make it soo difficult lol so many steps
+skylark19721 It is so many steps, I agree with you. Some of the parts are positioned very difficult place and in order to replace it, we need to remove many parts. However, after successful DIY, it feels really nice.Teddy
Great diy video. I have the same exact problem. First the door needed a little help closing, then the cable shredded and starting making crunchy noises, then the cable snapped. I wonder if the worn out hinge is the root of this whole issue and resulted in the cable issue. Need to go order parts. Thanks.
Thank you for your compliment on my work, Rich. Hope you will be able to solve the problem!!
Thank you a lot. Had a little bit of trouble but I got it done.
Hi, thank you for the comment and congratulations on your success DIY repair.
hi teddy, i believe the weakness of this design was that central bolt, that was the part that was causing the play on mine. i wish i can find a part just to replace that specific piece and not have to pay 100 for the entire hinge
Hi, Ryan. I hope you will be able to locate bolt parts. By the way, when I removed the center hinge and checked it, it was certainly bent by the weight of the door. I guessed that the main reason was the position of the hinge, and I would say it was design flow. The position of the center hinges of this sienna is very high point, therefor the hinge needs to hold heavy weight of the door. Other makers car's hinge position is lower than sienna. Anyway, good luck of your DIY project.
+Teddy Hashee hi teddy, i am sorry i do not know the part name, but i think the problem in mine is called the door hinge pin which did not bend, but has loosened at the top...there is a little part that helps with its fitment and i believe it os compromised due to the weight. am i on the right track? anyways, i am still going to order the whole hinge but for the future, i would try to fix that pin. thanks again.
Hi, Ryan. When I could not finish repairing due to not having necessary parts, I always kept thinking about it. Then suddenly the parts will come up in front of me like magic. I believe you will find your parts soon or later. May the force be with you!! Teddy
Nice job! You saved me a bunch of You Tubing and research. THANKS!
Hi Robert. Thanks for your compliment on my video. Hope your DIY repair will go well. Teddy
having to constantly adjust the spool between the inner and outside wire is a nightmare. It took me more time to do that than the entire reassembly of the door
Well damn,I see why the dealer wants to charge me 5 grand to fix both my doors. Great job and you are either stubborn or have tons of patience...😂😂😂
Hi, Coery. Thank you for your compliment on my video. As you said, I have tons of patience when it comes to fix something, and I actually enjoyed process. Hope you will be able to fix your doors.
I wonder if the center hinge issue contributes to the cable failure. Great DIY video on this fix. A mechanic would run you several hundred dollars.
If the center hinge getting weak, you will see the gap between door and body becomes so narrow. In my case the door was slightly touching the body. So probably the center hinge issue will contributes in some way for the cable problem in a long run. Thank you for the comment.
very job, Yu áre example the dedication and Best video for reemplacement!
Thanks, Teddy Hashee for posting this video. With your video I just finished replacing the cable on my sienna with a few broken plastic clip - the square head clip. When I popped the rear panel outside the sliding door, the plastic square head clip was broken. I preordered a pack on the round head ones. You know where I can order the square head ones?
thanks again. Job well done.
Hi, John. I am not sure about plastic square head clip. Are you talking about door panel retainer clip? or is it for the parts of the sliding door cable assembly? I am sorry that I can not answer well. Sometimes if I can not find any information regarding parts, I went to the auto parts shop and ask them. They can look up computer and find detail information for me. Hope this info will help you. Teddy
Awesome video. Very descriptive. I am having the same problem and because of your video I will tackle it myself. Thank you for such a great video. Andy
Me gusta mucho este vídeo gracias ,, también me gustaría ver cómo reparar la puerta trasera fuera de tiempo ,oh cuando el sensor no activa gracias de ante mano soy de Rep Dominicana
Great video. I love the details, yet to the point. Besides the cable & door hinge, are there any other parts that are worth considering to replace at the same time?
Probably the motor for the door lock and unlock. You can find it from Digkey online shop. Thank you for the compliment on my work!
Great video. Is it possible to just cut the cable to allow the door to manually open and close? I have this same problem and now I can barely close the door.
very good of you to post this
thanks for taking the time
Hi, thanks for your compliment on my repair video.
Seems somewhat comical that you kept running into problems but you did it =) thanks alot for the video, now time to fix my sisters van =(
Hi Jose, thanks for the compliment on my video. I hope your DIY repair project goes well. Teddy
Thanks for the video Teddy!!!!
You are welcome!
This video is valuable, but I’d recommend no music to this music in future videos.
Excellent my friend , are you very smart . I have a Toyota sienna 2004 XLE . I will present this class.
+Danilo matos Hi,Danilo. Thank you for your comment. Many people are encountering the problem with TOYOTA sliding door, so I hope this video help people. Teddy.
Great video, so much detail, which is appreciated.
Hi, Michael. Thank you for your compliment on my video. Hope your DIY repair will go successfully. Teddy
thanks for the effort in putting this together. Really appreciate it!
You are welcome. Hope your DIY project goes well.
Teddy
Teddy, great job on the video, thank you! I will be tackling this repair on my wife's Sienna this weekend. I do have one question, when you were counting the number of cable wraps around the pulley, you had written down 2 wraps for the front and 3 wraps for the rear. Later in the video when you had to add one more wrap, was that on the front or rear? Thanks again and have a good one!
Hi, I had to wrap the cable 3 and 3 for both side, however, I miscounted for the front one. So I wrapped 2 times for front and 3 times for back. You can wrap cable 3 front and 3 back then you see that 2 cables will meet in the center of the pulley. Hope your DIY repair will go well. Teddy
Hey, Teddy! Thank you for the whole video!
You are welcome! thank you for the comment.
Nice job,, I did an 2014.. Much less involved
Hi, Rick. Thank you for your compliment on my video.
Thanks for a very helpful video !!
Hi Abba. Thanks for the comment, and you are welcome. Teddy
Gracias , es muy bueno el vídeo y como lo explica y como se llaman las partes y cuánto cuestan para que no me vean la cara de whatt. Ojalá a mi esposo le gustará hacer mecánica.
amazing job Teddy !! Thanks you.
Thanks for the video, I'll try to fix mine.
Godspeed! hope you will be able to fix the problem!!
good job my friend
Thank you great v.ideo very helpful. it helped me to figure out my problem.
Good to hear! Thank you for letting me know.
Great video.
Thomas Hughes I had to do alot of back and forth and in the end I was out of warranty also but I called the toyota customer line not dealership and they have me a 500 credit on whatever I need so I am saving that for down the line with brakes or whatever it needs,with your problem it might be a resistor in the door that went bad since nothing is happening with mine when you push the bottom you can still here motor trying to work but the cable snapped there are a few videos online to change the resistor in the door not as hard as doing the motor like this,using it manual right now on mine and will be fixed soon when I have the time lol
Thank you
I bet that beer was great!
Yes, indeed. Thank you for the comment!
just bought a 07 sienna... heard this this was a real hassle.... previous owner did one door at the dealer a few months ago... the other (only used 10% of the time could be a ticking time bomb). Would you recommend doing cable & hinge if you're going to do the cable anyways?
If I knew that a center hinge would be a problem at the first time, I did replace the both parts that including a center hinge.
Thank you man... I wish we can do my car together
Hi Jamal. Thank you for your compliment on my video. I believe you can do DIY repair by yourself alone. Teddy
Hi Teddy,
How do you open the door to fix this cable? My van the rear cable (black) broken. I can't open and please let me know how to do it.
Thank you.
I fixed mine too!! Really thank you!!
Hi, thank you for the comment, and congratulations on your successful repair project.
Very easy I did not even looked at the video to do this. . But I saw it after all bc the owner of the car sent it or me lol
Thank you David for the comment, and congratulations on your success.
Thanks. Helped me a lot.
You are welcome!
Hi Teddy. Great video and so helpful. I'm having the same problem you had with the cable coming too short by an inch to snap it in the holder (20:44 on your video). What did you do to fix this issue? Thank you.
Hi, Laurent. When I was trying to snap one of the cable ends to the door side body, I could not do it. So I just remove the other end of the cable that was snapped in the tail side of the body, and first I set door side cable end, then go to the tail side end and pull straight strongly and snapped it in. Because of at the tail side, you do not have to bend the cable to snap it in, tail side was just a straight line. Instead, door side was kind of "L" shape and that was the reason I could not set cable. So first you want to set one of the cable ends to the door side of the body, then you go to the tail side and pull the cable and snap it in there. The plastic that holding cable ends has spring inside, so you should be able to pull cable long enough to snap it in. If this way will not solve your problem, then there may be other reason you could not snap cable ends to the body. I hope this will help you.
Hi Teddy.. great video.. I enjoy the charm of the music too.
My 2008 has similar problems, and also, the passenger side door is seized shut after the cable snapped. I'm going to start taking a closer look tomorrow, but do you have any idea why it won't open? I can hear something clicking near the bottom-rear of the door. Thanks!
Exelente trabajo 👍
Headache Saver Tip! Remove the window bolts the easy way, through the rubber grommets. They can be found in the middle of the big panel. 10mm. Everything else was helpful. Good Luck!
Thanks for the great info!
Dude ! You are total Awesome ! "Stick it to the Toyota Man" "" Your the Man Teddy! You saved me 1700 ""Smackaroones""
+Ruben Camberos Hi Ruben. Thank you for the comment, and I am glad to hear that your DIY project went well !!
Hello Terry, I haven't repaired it yet I'm waiting for the part on order. I have a part's place were the all part are of excellent quality and most of all very inexpensive. .The place is called parts geeks.com. or Geek parts .com something like that ' check out'.. Anyhow, I have your site. Hey , Thanks again ' Right back at you' brother ';)
+Ruben Camberos Thanks for the information about geeks.com. I will check them out. Good luck on your DIY. Teddy
Awesome video! well done thanks for making it.
Hi, Jen. Thank you for your compliment on my work!
Thank you very much teddy.. I'm a lot more confident to tackle this job now. Very informative video and great walk thru.
If you dont mind, how many estimated hours did this take you? Looked like alot of time disassembling and reassembling everything.
Great job!!
Hi, Doua. Thank you for your compliment on my work. The work hours will be 5 to 6 hours because I was shooting a video for each step. Without it, probably less than 4 hours you can finish it from start to end. Hope you will be able to fix your door problem!
What a great video. Thanks!
Jim Behr You are welcome ! Hope you will be able to fix your sliding door problems. Thanks !!
thanks, certain section of the recording was too fast ( removing the main body of the assembly with glass removal, top of the hinge removal ) at the moment I have cut the cable and the door works on manual like the old times. $1300 plus for this at dealer
??
good job
Thank you for your compliment on my video.
How did you fix the first issue you had? The one where the door opens but doesn’t lock at the end? I’ve been searching but couldn’t find how to fix it, if someone knows, can you please let me know? Thanks
Thank you very much 😊 I took
Hola, hablas español? Tengo una sienna y una de las puertas suena como si quisiera abrir pero solo hace sonido y no habre ni sierra.
You have to replace the rear hinge to, its not hanging like when new, its hanging a bit.
How comes there are know video on noah or voxy 2009 to 2013 sliding doors
Nice job thanks
Thank you.
Thanks for your video I have sienna after I made full cleaning the tow slid doors not working and I took the. Car to technical he said Avery think ok but no power electric how I can solve this problem can you help me please
I wish I could help you. Here is a good information site they might help you out.
www.shareyourrepair.com/
Teddy
Well fuck me, this looks like a lot of work to just get a door to open, I appreciate simple mechanical doors more after watching this.
I totally agree with you. Automatic door is OK at first, then when it comes to not working condition, it will cost you more than $1k to fix the problem at the dealership. That huge cost will drive many car owners to DIY repair.
Great job,
How much gana cost me if I want to fix it in dealer or other places?
+ABO MARWAN It depends on how bad your door parts are damaged, but many people went to the dealer found out the cost from "1,500 - over 2,000". Teddy
That's true. Toyota dealer ask me a $1300 for that job. I eliminated the cable and I open the door manually. Now with this good tutorial, I think it repair myself. Thank you for sharing.
Hey Teddy.
we had decided to fix the door after the new year because of the financial cost of the cables with housing. I was installing the window back in and putting it all back together so we can use it manually and the door closed without having the 2 bolts in on the hinge, now the door is jammed and I can not open it. Any advice?
Probably the cable is jammed. If you are going to buy new cable, then you can just cut old one and the door will be free from cable. Even though you are switching to manual mode, if the cable is jammed, you can not open the door. Only solution is cut the cable in somewhere. Or just you can remove the one or both end of the cable from its stopper. You can where the end of the cable in my video. Hope it will help you.
Great job. good video.
+WindowReplacementAgencyOfMilwaukee Thank you for the comment. Teddy
Great video! Thanks Teddy. How is the quality of that cable assembly? Should I buy OEM part instead? Thanks.
+Hoa Pham Hi, the parts I bought is OK and no problem so far. So I can say that it is safe to buy not OEM one. Hope you can fix your door too. Teddy
+Teddy Hashee . Thanks, I just ordered the part off ebay but it did not come with the bearing which goes into the cover as at 15:35 in your video. Does it suppose to include that bearing? If not, do you know where I can buy one? Thanks.
+Hoa Pham Hi, motor pulley wheel is not included to the cable set. I found one on ebay.
goo.gl/Zbf4XT
Make sure to contact seller that this item will fit your car before ordering it.
Teddy
+Teddy Hashee Thanks Teddy, I stil have the pulley. What I am missing is the small bearing that goes into the cover (I think the one that fell out when you open the cover at 4:10 minute in your video. I opened mine and the cover was broken, and I could not find the bearing. Please let me know if you know the part number of this or know where I can find it. Thanks a lot for your help.
+Hoa Pham Hi, Hoa. I tried to find out the parts number, but not luck. I think you can go to the car parts shop and ask them the parts number. They are easily check your parts number with their computer. Sorry that I can not help you. Teddy
question does the aftermarket cable kit come with the cable cover bearing because I notice the kit I got those not have the bearing...can you advice were to get one ?
+Rob M Hi, Rob. Thank you for the comment. Honestly I do not know where to find. But I think if you go to car parts shop, they might be able to tell you. Teddy
The bearing can be removed from the original housing and placed in the new one.
The cable shown at 18:53 is the part that i had to pull off the clip to get my door to close tonight. So do i need this whole assembly to fix that problem?
+fiestyfemme You can remove door panel, then remove cover of the pulley. That's it. Or if you change cable and do not need to keep original one, you can just cut cable from outside of the car. This way, you do not have to open the door panel. Hope you can solve your problem. Teddy
best repair!!! I just got one in yesterday and didn't have a clue where to start. the cable on the top where the mid hinge is was broke. can you replace that or the whole cable? thanks man.
The cable is assembled like these
amzn.to/2amjVoE
I recommend to use assembled one that will be easy job. Teddy