Ein Werkzeug und 32 verschiedene Arbeitsgänge. Bewundernswert der absolut eingehaltene Arbeitsschutz, siehe als Beispiel die hochmodernen Stahlkappen Sandalen. 😂 Frag mich was das für ein Gusseisen sein soll. Die Meißel würde ich noch länger einspannen dann laufen sie auch schön leise.
Früher oder später muss selbst diese Tinnitus-Fabrik ja mal durchgefeudelt werden ☝🏻 Und ab in'nen Ofen mit dem Kehricht... Da soll der Kunde sich mal nicht so anstellen bei der Materialgüte!
Amazing how much a little attention to the machine, that is oiling,greasing, and just general clean up of the area. You put so much torque on the hold down bolts ,it’s amazing that the threads haven’t stretched! 👎🏻
I wonder how much wear these machines must have, especially the guideways in these machines. Not only they are very old, also completely dirty and neglected.
At 35:30 there is still a guy with a hand not taken off by some machine ready and available to brush the chips 1 by 1 out of the way while trying not to lose his hand. That could be why lol
Diese Stahlkappen Sandalen bewundere ich immer wieder :-)
You guys are on a next level! look out for yourself! be safe !
These guys are extremely talented, working with old machines and producing quality work
Exelenteeee trabajo mis hermanos Saludos y bendiciones desde Monterrey NL México 🇲🇽 y le mando su poderoso like 👍
Nice Work!
First and only worker that I have seen use a little safety in these videos!
Bravo bravo muito augúrio trabalho top show 👏👏👏👏👍🤝🇧🇷🇧🇷🇮🇹
svaka vama čast, kolege! dipl ing dragan from serbia
Ein Werkzeug und 32 verschiedene Arbeitsgänge. Bewundernswert der absolut eingehaltene Arbeitsschutz, siehe als Beispiel die hochmodernen Stahlkappen Sandalen. 😂 Frag mich was das für ein Gusseisen sein soll. Die Meißel würde ich noch länger einspannen dann laufen sie auch schön leise.
Früher oder später muss selbst diese Tinnitus-Fabrik ja mal durchgefeudelt werden ☝🏻 Und ab in'nen Ofen mit dem Kehricht...
Da soll der Kunde sich mal nicht so anstellen bei der Materialgüte!
بسیار خوب بود تشکر .
Bravo Mali,i da nadjes nekog klinca iz komsiluka da ti radi montazu videa,deca to veoma brzo nauce!
Joking aside, these guys work in HORRRENDOUS condition, with very old noisy machinery.yet produce some quality items,
...
Гвозди б делать из этих людей:
Крепче б не было в мире гвоздей.
Николай Семёнович Тихонов. «Баллада о гвоздях»
а ведь на этих станках еще можно было что то делать
Load certified bolt!
Amazing how much a little attention to the machine, that is oiling,greasing, and just general clean up of the area. You put so much torque on the hold down bolts ,it’s amazing that the threads haven’t stretched! 👎🏻
Finally an accurate title.
Good job EVERYBODY!
How about doing a factory tour video showing all the machines?
Ok Matthew, Coming in near future.
Please clear / clean the work areas. It's not that hard to do. You will gain respect.😊
@@vicferrari9380 I don't think you'll ever get the cultural difference between you and Pakistan !
@@MatthewTinker-au-pont-blancwhat does cultural differences have to do with anything?
@@vicferrari9380 You don't have the same cultural values.
Great job.
Thank you! Cheers!
I wonder how much wear these machines must have, especially the guideways in these machines. Not only they are very old, also completely dirty and neglected.
Claro que tienen mucho desgaste y no es por lo viejo sino porque máquina Fierro vasiado y este es muy abrasibo
How much wear - yes!
Mes respects !
😂😂 видно что заготовку отливали там же, и те же "специалисты" 😅
Great video as ever. What is the quality/hardness of the metal?
Glad you liked it
Metal WWCF - what we could find))).
Looks like it’s cast iron
@@andrewjohnmclean5488 yes correct cast iron.
Die Maschinen sind aber immer noch höcht zverlässig.gute wert arbeit
Why the 15 day wait? Nice looking work
Because the pulley was not ready yet
hey it works
Think his shirt could do with an oil change.
Never see anyone using a compressed air line...any reason??
At 35:30 there is still a guy with a hand not taken off by some machine ready and available to brush the chips 1 by 1 out of the way while trying not to lose his hand. That could be why lol
never see anyone using grease, hand protection, breathing masks... too many questions, the answers are few
Butler shaper made in Halifax,
Bullshit! !!! In one or two off production this is still the way ......Possibly in higher speed with vastly improved cooling...though a lot wetter...
if it doesn't fit pound it in
More bodge it engineering
Why not pop over and show them how you did the ones you have worked on.
Do not chip your work!
Way to many ads, Have to UNsubscribed.
we never put manual ads, its youtube auto
That's some horrid cast metal. They take no care or pride in their machines. I'm suorised they have lasted that long
Honesty dedication paysg❤🎉😅
Fornothingglooodf9fnothing
,
Stands for vdos