Každý kdo je aspoň trochu technický typ se o to bude vždy zajímat! Pamatuji u nás v roce 1960" v Praze v ČKD. Praha ve slévárně se tam dělali mnohem větší odlitky než je na tomto výdejku,,, Těžká práce a málo placená a málo oceněná jako všude ve světě! 😂
I understand why they use these old machines, but given their skill level what I don't understand is why they don't keep the machine tools in better shape.
They simply make do with what they have because the shop owner is either too frugal or machinist supplies cost more than would be feasible to purchase given what they are paid for such jobs
I know two guys that work at machine shops that run the old manual machines that these guys do. Everybody else all run CNC/computer stuff. The guys that run manual machines will be in high demand one day. THANKS!
INTERESTING! I hardly see any comments on this channel. I actually work for a machine tool builder and we also still use this vintage machines. Guess I stirred up things a little 😊
I have news for you.. The lathe has been around much, much longer than just "100 years". In fact, lathe work goes back so far that family names like "Turner" are rather common.
Sou torneiro ferramenteiro aposentado, mas os indianos são admirados pelos seus conhecimentos de qualquer serviços na área mecanica com maestria nnota 10 trabalhei toda a minha vida em maquinas convencionais
Effrayant les conditions de sécurité 😱 En sandales pas de casque pas de gants 👷 J'aimerais voir un inspecteur du travail français dans cet atelier, le mec fait une syncopes direct 😂
With all the cheap labor available you would think the place would at least be as clean as workshops in other countries. They are assembling gearboxes on dirt floors and fans blowing dust everywhere. I know it is a poor country but clean machine shop practice costs nothing. I won't even go near the topic of safe work practice. Even when that shaft was running on the live center it should still have had the support roller frame installed.
مساء الخير ٠ الله يساعدكم والف شكر على هذا التصنيع الحلوا ٠ ولكن عندي سؤال لماذا المكاءن التابعة لكم يعني ( التورونات) يعني المخرطة وسخات جدا جدا لازم كل يوم يتم التنظيف هوا بالأسبوع مرة صيانة دائمة وشكرا واتمنى لكم التوفيق ٠
@@danielbrstak5730 believe me, it is much cheaper to keep and develop a nuclear arsenal than not to have one. I’m telling you this as a Ukrainian from my own experience.
@@dmytromykhailychenko5400 but this is not about politics, nuclear profilerations , Russia vs Ukraine etc. This is about greedy factory owner who don't want to buy their workers even a proper safety boots . Please look at 25:40 . I was terrified.
Lavoratori encomiabili con macchine obsolete ma è un ambiente troppo sporco e degradato . Non è tollerabile . Fare pulizia è un dovere non un optional.
Very little regard given for human safety or life itself in these countries , if a person is killed or maimed another person replaces them and life goes on as if nothing happened!
Dropping that chunk of metal on the shaft has to be one of the most asinine things I have seen. Could very easily sheer one of the teeth off as it smashes down and falls to the side.
"Все говорят, а я делаю" и "не нужно думать, нужно трясти" возведенные в абсолют и доведенные до абсурда. Уважаю предельные переходы. Но, конечно, это не они такие. Если им показать правильную базу, то они делали бы все на отлично.
100 ys old technology my ass , this is the same today , just carbide cutting materials and lots of cooling , to make one offs , only for series production one goes digital !! THIS IS NOT SERIES PRODUCTION ! Have to conceede though , shapers are today replaced , in 90% of the cases. replaced by milling machines.
Lo veo y no lo creo,todo mal . Empezando por su propia seguridad. El trabajo ,quedara bueno???? Y si, asi es. Cuánto durara???? Todo sucio, noooooo mal🧐😤😤
Gives a whole new meaning to the term 'precision engineering'
🤣
I really enjoy watching skilled people making high quality parts on machines that would be considered obsolete in the USA!
Každý kdo je aspoň trochu technický typ se o to bude vždy zajímat! Pamatuji u nás v roce 1960" v Praze v ČKD. Praha ve slévárně se tam dělali mnohem větší odlitky než je na tomto výdejku,,, Těžká práce a málo placená a málo oceněná jako všude ve světě! 😂
Да вот только в конце посадочное место под подшипник прослабели.Это уже брак.
Minim safety..
@@kostyx3340тоже заметил, что просадил вторую посадку.
I understand why they use these old machines, but given their skill level what I don't understand is why they don't keep the machine tools in better shape.
They simply make do with what they have because the shop owner is either too frugal or machinist supplies cost more than would be feasible to purchase given what they are paid for such jobs
They use water as a lubricant.
@@donniecardwell3786 yeah, they could clean the swarf from the mill. They could oil the ways of the lathe etc.
Don't fix what ain't broken.
They don’t have a basic understanding of their own safety , so looking after a machine wouldn’t enter their heads.
It takes that statement "Make do with what you got" to another level.
For sure , they make it do a hell of a lot 👍🤛
I know two guys that work at machine shops that run the old manual machines that these guys do. Everybody else all run CNC/computer stuff. The guys that run manual machines will be in high demand one day. THANKS!
INTERESTING! I hardly see any comments on this channel. I actually work for a machine tool builder and we also still use this vintage machines. Guess I stirred up things a little 😊
Worse thing is the owner live in luxury The staff paid SFA and not appreciated
A clean work environment COSTS ABSOLUTELY NOTHING, Filthy everywhere
Time = money = costs something.
costs the labor to clean
I agree with you,the other people commenting have no clue.
@@nicknam8478 You supporting cleaning is for free? People doing cleaning are not paid? Or do we misunderstand
@12:00 - the runout on that chuck! OMG! :D
Got a piece of cardboard jammed into the morse taper to stop the drill chuck slipping !
It calls drunk style drilling machine!
Pensei que era uma bailarina bêbada!
Its sure fun to watch but also amazing how long that took compared to a modern cnc that would do that in no time at all
I have news for you.. The lathe has been around much, much longer than just "100 years".
In fact, lathe work goes back so far that family names like "Turner" are rather common.
Remote the swarf from the worksite , Kurtis at Cutting Edge Engineering could definitely give these people some efficiency pointers
Maybe you can also suggest not to rest the crowbar on the machine bed?
Yeah, right... this guy can only use a button plate for everything. Even to butter. He is nice but he isnt pro😊
Looks like equipment that the Brits left behind.
It's more like the British stole everything.
Sou torneiro ferramenteiro aposentado, mas os indianos são admirados pelos seus conhecimentos de qualquer serviços na área mecanica com maestria nnota 10 trabalhei toda a minha vida em maquinas convencionais
new OSHA approved Carhart open toe sandals!!
Effrayant les conditions de sécurité 😱
En sandales pas de casque pas de gants 👷
J'aimerais voir un inspecteur du travail français dans cet atelier, le mec fait une syncopes direct 😂
Is sweeping the floor or fixing the bent shaft on the mill beyond their intelligence level? @32:20 Spike Milligan makes an appearance.
I wonder what the accepted tolerances are there coming out of that workshop 😊? Have to be measured in mm not thous
+/- a thumb....just like the owner's son
With all the cheap labor available you would think the place would at least be as clean as workshops in other countries. They are assembling gearboxes on dirt floors and fans blowing dust everywhere. I know it is a poor country but clean machine shop practice costs nothing. I won't even go near the topic of safe work practice. Even when that shaft was running on the live center it should still have had the support roller frame installed.
Всем Присвоить Звание Героя ИНДИИ !
Некоторым посмертно
Это точно...@@luronoboev5369
مساء الخير ٠ الله يساعدكم والف شكر على هذا التصنيع الحلوا ٠ ولكن عندي سؤال لماذا المكاءن التابعة لكم يعني ( التورونات) يعني المخرطة وسخات جدا جدا لازم كل يوم يتم التنظيف هوا بالأسبوع مرة صيانة دائمة وشكرا واتمنى لكم التوفيق ٠
How do you like their hydronic press, drop a big weight from the ceiling.
it may be crude, but it is effective and it works.
@@gilbertarnold-percy It bounced off the gear, Yer it works ok
It's not the machines that are obsolete it's the country
It's not too much money in the country
But they have money for keeping a developing their nuclear arsenal.
@@danielbrstak5730 believe me, it is much cheaper to keep and develop a nuclear arsenal than not to have one. I’m telling you this as a Ukrainian from my own experience.
@@dmytromykhailychenko5400 but this is not about politics, nuclear profilerations , Russia vs Ukraine etc. This is about greedy factory owner who don't want to buy their workers even a proper safety boots . Please look at 25:40 . I was terrified.
@@danielbrstak5730 мужик ты как никогда прав.
Is it me or is the sound kinda squealing a lot. Had to watch with no sound on.😢😮
20:00 wtf have they done to that lathe? Stick to agriculture and leave engineering to countries who invented and it and understand it.
18:35 that slot looks like a rat had chewed it out. Shocking workmanship.
Gente, tudo bem quê a Usinagem deles é um Desastre! Agora, soldar a peça prá fazer a chaveta é o fim do Mundo! Quê serviço de porco!
Lavoratori encomiabili con macchine obsolete ma è un ambiente troppo sporco e degradato . Non è tollerabile . Fare pulizia è un dovere non un optional.
12.00...very interesting...using fly cutter mount on the chuck
excellent!
7:48 -> Handmade seal of approvement :)
Molto belli i sandali infortunistici che hanno ai piedi
шикарный пресс
Нда уж. Технологии 21 века - особенно заталкивание вала со шпонкой в песке, на а последующая запрессовка, так это вообще за гранью фантастики
Very little regard given for human safety or life itself in these countries , if a person is killed or maimed another person replaces them and life goes on as if nothing happened!
Put some Glasses on please. Even if I had perfect eye sight. Would still have safety glasses on. I saved my eye by having safety glasses on.
GREAT WORK
Precisão absoluta !!
Good 👍
I'm Korean people
Is it moral for consumers in rich countries to buy products that are made with no steel toed shoes or safety glasses??
Good work. :-)
Dropping that chunk of metal on the shaft has to be one of the most asinine things I have seen. Could very easily sheer one of the teeth off as it smashes down and falls to the side.
"Все говорят, а я делаю" и "не нужно думать, нужно трясти" возведенные в абсолют и доведенные до абсурда. Уважаю предельные переходы.
Но, конечно, это не они такие. Если им показать правильную базу, то они делали бы все на отлично.
Глаза,руки и ноги у них регенирируемые 😢про голову и говорить не нужно.
Я в недоумении, это развлекательный контент или это реальное производство ? 25:40
Это фильм ужасов.
Parece el año 2090...apocaliptico!! sin ninguna norma y vestimenta de seguridad😢
At 25:40 I hold my breath😮😮😮😮
first time i have seen an over carriage shaper
its called a planer
25:20 ну это нечто )))
Arbeitsschutz ist total überbewertet 😂
You turn so slowly you gonna stall that lathe..
Chi fa lavorare la gente in queste condizioni va arrestata
Brasil 🇧🇷
33:07 - самый умный принимает работу))
Deus é pai!! 😂😂
Nope they make a mockery of the word skilled
old school
Интересно любоваться современными рабами?
OMG no safety gears.
Looks like their all a bunch of hacks!!
Not impressed. They can do better
😯😯
100 ys old technology my ass , this is the same today , just carbide cutting materials and lots of cooling , to make one offs , only for series production one goes digital !! THIS IS NOT SERIES PRODUCTION ! Have to conceede though , shapers are today replaced , in 90% of the cases. replaced by milling machines.
all for 1 dolla
Que serviço mais porco kkkkk
QUE PENA . NO LE DAN ROPA Y BOTOTOS DE SEGURIDAD LOS TRABAJADORES . MENOS GUANTES . MALO MUY MALO .😢.
Lo veo y no lo creo,todo mal .
Empezando por su propia seguridad.
El trabajo ,quedara bueno????
Y si, asi es.
Cuánto durara????
Todo sucio, noooooo mal🧐😤😤
бедные станки