How To Fix Piano Not Working | Piano No Power Easy Fix
ฝัง
- เผยแพร่เมื่อ 3 ม.ค. 2022
- How To Fix Piano Not Working | Piano No Power Easy Fix
thus model of Piano Casio CTK-3000
it has nice sound with about 400 different tones and about 100 different drums
and more very useful functions
thus Piano stop working
here are some important tips to troubleshooting Piano not working
1- check power supply first if it's working by multimeter
2- check fuses brown out if available
3- open Piano check for any broken conditions
4- check for ant loosed cables or bad burn components
5- check if power plug is broken or losed
in this video power plug has broken condition
soldering with little wire short connect
the problem is solved
thank you for watching 👀 🙏
please check out other videos in our multi-channel we upload videos regularly and Randomly you may like 👍 a video or so and consider 😀 subscribe like and share 😊
Best Regards 👀 - แนวปฏิบัติและการใช้ชีวิต
![USA Showcase: CANADA vs USA [OFFICIAL STREAM]](http://i.ytimg.com/vi/m9Cz3xsdDgc/mqdefault.jpg)
Finally someone who actually opens the piano up. Thank you. 🙏🏼🤓💐
My pleasure 😊, thank you so much 💗 and all the best 💓💓🙏
Thank you
My pleasure 😊, thank you so much and all the best ❤️
Well done with the wire jumper but now it's time to pull out the Windex and a soft cloth and give your piano a wash.
Thank you so much my friend, yes it definitely needs to be cleaned, all the best
@@WorldRandomVideos 👍☺
Hi there. I have the same issue with a CTK 3200. Could you show me where to solder the bridge wire on this board?
Hi my friend, if you see any broken of connection legs just follow the connectors lines to the closet next soldering pin and use wire to close the shortage broken connection if you watch the video carefully you know where to soldering, thank you and all the best 🙏🙏🙏
Hi, thanks for the video. My roland keyboard does not turn on, when i press the power button the light on the screen just keeps blinking. Yesterday I turned it on and it worked without problem. Can someone help me figure out what's wrong with my keyboard?
Hello my friend, Try the following troubleshooting steps by step:
1- if the power supply external test it with multimeter DC Voltage if is correct? ,try to move the power cable if has cut or shortage while testing it. If there's nothing wrong go to next step
2- check the power jack input for power supply if it's broken or moving
And to do that you need to have an access by removing the cover so you can see it, the power input is connected to the electronic board check if there's any cut or broken connectors if there's any use soldering gun to solder it ,
3- if the power supply internal or built-in remove the Cover test it by using multimeter you need to test the output voltage and test diodes and transistors Maybe one of the transistors not working, if the power supply works ok , go the the next step.
4- when you remove the Covers Try to check all wires and all electronic boards and all input and output check at close look you may use magnifying glass if there's any cut, broken connectors on electronic boards wire all connected ok make sure no cut or corrosion or moisture in the boards,
I hope that can help you to figure out
Thank you and all the best 👌 👍
@@WorldRandomVideos Thank you so much for your response. I was able to verify that the problem is the power adapter. The keyboard works without problem. Thanks for the help! ☺️
@StarGlow Piano my pleasure 🙏, Best regards 😀
Great video. Quick question, you mentioned you tried inserting batteries and that also did not work. Once you fixed the issue with the power, were you able to use battery again? Thanks
Hello my friend, yes after the problem fixed the battery power works too, the main power is connected to battery power as well, thank you so much 🙏 and All the best ❣️
That’s very helpful. Thank you. I’m trying to figure out the issue with mine
@mendozawav8202 my pleasure 😊
Soundtrack So emotional 😅
Thank you so much 😌😄, and all the best
Sir good day! I need some little help of my psr 323. There's a problem in power i tried 9v 350mah but it didn't work likewise in 12v 2A. Its possible to bypass the power and connect it to the battery connection? Or there's anything else that i can try to fix this sir? Please notice me 😢 thanks!
Hello my friend, first it's recommended to connect it with right power supply voltage and ambrage some paino can't work with less A even if the V same, I think the power adapter for par 323 is 12v 1.5 A, test the power supply to make sure it's working by using multimeter to read the right voltage, after testing power supply and it's working and keyboard still not working it's most likely the input power jack is the issue maybe it's broken inside from electrical board or wires shortages or cut and it needs to be fixed by open the cover and test it, you can connect the power supply directly to battery terminals positive on positive and nagative to nagative, this method will also work, you may need a good power supply same Volts 12v and 1.5 A if the sounds of the keyboard is chipping or not loud enough then you need higher Ambrage 2 A to operate it with enough power, thank you and all the best
I tried to connect it to the battery connection with a 12V 1.5A and 2A but it didn't work sir huhu
Well, my problem is with the power button. I can hard power on using the mosfet easily, so I guess the problem is different
Power button if it's touch or soft touch press It's either the base of the black graphite dirty or corrosioned or the button bottom Both need cleaned with medical alcohol, if the power button old style mechanical press it could be the legs are loosed or not connected to electronic board, or power button switch is bad, check the electronic board if any cracks or cut connections, thank you and all the best 🙏
Do your haveIc power sound number of Yamaha PSR 282 ?tell me number s of it
Sorry, I don't understand your question, what do you mean ?
I have a Yamaha psr e323 which is sounding double keys (only two keys side by side) in all octives pls help me e
Try those troubleshooting step by step, starts. With easy ones
1- have you tried to set up from menu settings or change the tunes or keys sounds and do on try to play with menu first or look in user manual if you have if still not solved try step 2
2- if your Yamaha has reset key or bottun try to Reset it, unplug the power press and hold power bottun for about 30 seconds then plug it back this may solve the problem if resetting didn't work go to 3
3- it could be something burned inside electrical components such as tune transistors or ic this need to dissemble it and test all electrical boards and wiring and connections and connectors.
Thank you and all the best ☺️
@@WorldRandomVideos thanks sir but how to test the connection (l have a multimeter)
@madirasamueljohn1153 ,
It's not easy even for an experience technician you need to test each tune transistors to find out which one need to be replaed, it's hard to explain, because each transistor has different reading so you need to have experience and knowledge about transistors, but why do you think it's transistors problem, have you try to reset it? Or use menu settings to change key tunes ?
Thank you and good luck
Hello po. Pwede po bang magtanong kung ano pong tools ang pwede gamitin pang maintenance at repair ng piano? Ang mahal po kasi kahit magpapachange lang conductive rubber, parang mas maganda kung pag-aaralan ko nalang.
Hello my friend, you a kit or set of Multi sizes and shapes
screw drivers, you need soldering gun with soldering removal tool or copper screen soldering removal.
You need soldering flex, you need picking tools or tweezer, you need electronic multimeter to test components. Thank you amd all the best.
diculpa es el diodo 102 que tengo quemado de mi ctk3000
Hello my friend, you can order doide kit from aliexpress very cheap or look for same doide value ,
C$ 3.06 5%OFF | free shipping 1/2w 0.5W 1w Zener Diode BZX55C 3.3V-30V 14values*10pcs=140pcs Assorted Assortment Set New electronic diy kit
a.aliexpress.com/_mqy77UO
All the best 👍
I have a different problem kind of similar when i turn on my first act piano it works for a couple seconds then when i try to play a note it wont work
Hello my friend, Try the following steps:
1- check or test the power supply or adapter with power Cord use multimeter test the voltage it should be same what label manufacturer sticker on power supply, if it's less that means power supply is not good or if there's no voltage means it's burned, and either way it must be replaced,
2- check the power cable jack male and female if the piano power Jack is loosed or moves then it has damaged from inside with motherboard connection,
Sometimes the power cable jack has shortage or cut, test voltage while move it left and right to make sure it's not shortage
3- if all ok then the problem it could be inside electronic boards check if there's a crack broken connections or wires shortages etc,
I hope that will be helpful, best regards 😊
how do you know which place to solder?
I follow the same connection line on electrical board, if I can't see it I will have to use multimeter,
Thank you so much and all the best 👌 👍
if.my organ will open i can't back again..
Hi i really need help😢
My piano YDP 165 stoped working. When i on the piano it work for llike 10 to 20 sec and the piano switch which has small light in it when it's own started blinking 4 to 5 times and it stoped working and i off the light switch and on the switch again, it blink for 2 to 3 times and it never worked again. The voltage was ok can u please tell me what to do😭
Hello my friend, there are several issues can cause that, you can try the following steps or visit those 2 links for more details,
Please try that:Turn the power of the instrument off. Then, while holding down the lowest key, press the [ ] (Standby/On) switch to turn on the power again so that the [REC] indicator flashes three times.Once you do that try to turn on the piano the regular way.I hope that helps,
you try unplug it from the power outlet > leave it like that for at least 1 minute > press the power button for at least 15 seconds > plug the power cord to the outlet and try to turn it on again.
gzhls.at/blob/ldb/e/b/8/e/2140f7dccbc09461a29e13e4733e2eaf4cbf.pdf
pianotechniciantuner.com/blog/Blinking-Flashing-Lights-Guide-Yamaha-Enspire-Disklavier
Good luck and all the best 🙏
Let me know if the problem is solved
Thank you 😊
@@WorldRandomVideos that's so kind of you. I really appreciate it thank you, I'll give it a try. .
What happened if it the on button that has the problem
You can test it by using multimeter to see has any reading ,
Here's how
You need to access inside remove cover to be able reach the bottom from inside connections
Piano must be on use multimeter on DC voltage first and check if any reading, if not use ohm function on multimeter Paino must be off and connect to the button connections to see if any reading, if there's reading that means bottom is ok,
If not you need to replace it
My beston 37 key piano is not working can u tell me what can i do please
Hello my friend,
* You need to remove the Cover carefully.
* after you remove tye Cover take a close look what cause the problem, there are several causes , key stuck,
Key not in right position shifted off,
Damaged key or broken, when key hit hard or some liquid spelled on it like water coffee etc can cause stuck key, thank you and all the best.
It works but now my piano's speaker is not working clearly.
@Neharika Raj (ND) it could be bad speaker need to be replaced or one of the sound bad transistors must be checked with multimeter to know which one, good luck and all the best .
Can i take my piano to an electronic shop
Please tell me its urgent
saan kaya pwedeng mag oatingin ng organ nawala din yong power niya
Check the power supply and power connection, if they work ok you need to dissemble it to diagnose the problem, thank you and all the best 🙏
Hi I just dropped my Casio keyboard on the concrete and it won't turn on now,,, cann you pls help
Hello my friend,
Try troubleshooting the following steps
1- check if there's a power going in piano, remove cover and use multimeter to test any voltage if there's any go to next step
2- deassemble the piano recovery cover and check if any broken or cracks on electrical boards usually sometimes can be very small crack or broken connectors or connections
Hope that can help you to figure out
Thank you and all the best 👌 👍
@@WorldRandomVideos thank you I'll try it out and let you know♥️🙏🙏
My pleasure 😊, Best regards ✨️
@@WorldRandomVideos ok update I opened it up and found out that the place where the power connection is connected to on the board is broken what's the next step???😢😢
The next step is :
If the power jack connector is broken or damaged completely you need. Yo replace it,
Use Soldering iron and brush or soldering soaker tool ,
Remove old solder hold the connector legs one by one and free up or clean connector from solder, and place new connector if you have one,
If you don't have power connector try to fix it, see which part is broken if connection board wires are cut scrape the green paint until you see the metal then solder them together.
If the broken connection are bad use electrical wires to connect the cut or broken components together by Soldering together.
If you can't fix it or replace it here's my way to make it work.
Find the 2 main terminals + and - on the power connector with electronic board and connect the power Cable directly to them + - this method works to make power direct to piano without power jack connector.
Make sure to solder + on + and - on -
This is a good way to fix it but if you don't care just want to make your piano works .
Good luck and all the best ☺️🙏
isko chalane ke lie dc wire kaise bnaye pls
the tin wire is to connect the broken connection in the electric board
the electric board has golden plated connectors between the power input and cyrcalor board + and - one of them has broken connect so I used tin wire to direct connect,
I hope that can help you to understand best regards ✨️
thanks I will subscribed u
Many Many thanks and appreciation 🙏 thank you so much 💓 🙏 💖
And all the best 👍
Yeah, like we're all supposed to know where to attach a little jumper wire. Give me a break.
Hello my friend, you're right for some people it's not easy but if they watch this video or other similar videos it will be very helpful Steps, thank you so much and all the best
Keyboard ripening karvan hai app apna phone number dijiye me Delhi se
Thank you 😊
Thank you
My pleasure 😊