This has most likely burnt the living crap out of the nearby components. Interesting to see if the new chip is also burnt to hell when he puts it in😂😂😂
Nah not really. Putting it on is easy, clean it, flux it, solder a couple corners in place than lay the solder long ways along ic, use chisel tip and heat as many legs as you can, flow solder. You can re flux and re flow it out if you miss something. Im no expert but I have done a few of these. Im sure theres always someone that knows more but my experience getting them off is the hard part with just a normal iron. I like to heat up the solder wick and use it as a heat sync assiming i dont have a hot air station to use.
The great VP of the year is educating us to remove ic using 2 tools instead of 1
Nice work Tks for the tip
what about the nearby other components? will any harm be done?
ahhh the good old remove everything including the resistors 🤣🤣🤣
Joss....wong ngalek jian joss
Woh ini wong nggalek jatim ya?
@@xpcwalker9421 ngih mas 🙏🙏
What kind of paste do you cover the pins with at the start ?
Flux, it help spread the heat evenly to an easier removal
Did the motherboard survive?
This has most likely burnt the living crap out of the nearby components. Interesting to see if the new chip is also burnt to hell when he puts it in😂😂😂
Ye kaun sa liquid lagaya ha aapne
Good work I have a similar video on my channel
The near by components are gone, how you do that?
what temp?
Question is after ic replacement how long actually motherboard will work
What liquid are using
goods လောက bads လဲ လောက သုံးနေရင်ပျက်နိုင်ပါတယ် fullလဲပြန်ကောင်း
how to do it with 88i6745-TFJ1 ?
nice vai,vai ami apnar channel ta subscribe dici apni amay akta subscribe den,binimoy hisebe na dekhe help mone korben plz
You could have use the heat gun at first 🤔🤔🤔🤔🤔🤔
Exactly
Ok, but you don't show how to replace it. Wouldn't that take an enormous amount of pinpoint-precise soldering?
Nah not really. Putting it on is easy, clean it, flux it, solder a couple corners in place than lay the solder long ways along ic, use chisel tip and heat as many legs as you can, flow solder. You can re flux and re flow it out if you miss something. Im no expert but I have done a few of these. Im sure theres always someone that knows more but my experience getting them off is the hard part with just a normal iron. I like to heat up the solder wick and use it as a heat sync assiming i dont have a hot air station to use.
Bro i want M3030RFGPFP Programing ic can u help me
Brutal tapi berhasil
over heat
Inconclusive! So what's the point?
How to remove solder from io pin???
Solder wick
@@NunYa953 ot hands (if ur storng)
What is that liquid u using
Flux
@@anhtruc8439 Why'd he use solder? Can't you just use a heat gun?
@@KnexRules8365 because it help the heat transfer
@@Gabriel.4190 oh I see
@Paul Sanderson Lol, but we can't pretend that everybody are skilled as much as him