Y’all!!! Do the paint by number on a white shirt so we can actually color it!! Edited to add - the acting in the HelloFresh ad is S tier. Y’all are so talented
@@RaeneTheFaerieThey kinda do, but you'd get a lot of cracks in that paint job because that's a big surface area completely covered in paint. You'd run into the same problem with fabric paint. Fabric markers would work better, and you could still see the numbers underneath which would fit the aesthetic.
They did a DIY 'stained glass' using resin in 2019 and it worked pretty good. (BUY vs DIY - Recreating Stained Glass with RESIN? on October 25th 2019, I'm not sure if I can link to it here.) They test it in sunlight at the end and (spoiler alert) it lets a lot of light through and performs about as well as the shop-bought stained glass kit, so definitely a good idea.
Evan laying on the floor to give “calming energy” is such a mood because I’ve never seen that dude calm😂 I think that was the only thing he could do. Ps. I would still really like to see the cheesy pasta recipe please and thank you
I've just discovered you two, so have been binging your videos the past few weeks. You're such a wholesome and hillarious couple. Just wanted to show some appreciation for all you do.
Can we appreciate Katelyn's patience? Evan's "You are going to break it" chants and hindering would have gotten a smack from me so badly! Proves how solid they are as a couple. As for the paint by numbers, Katelyn's design is so cute!
They've previously used those kits with the melty plastic, I'm so surprised they weren't just using one of those! I mean, I love the design details instead of the easy option, I was jut surprised!
An easier alternative might have been to 3D print your walls instead of laser cutting them. Either way, really cool idea! You looked like you really enjoyed it.
That occurred to me too but I suspect that without a super expensive industrial rapid prototyper, their normal consumer 3D printer wouldn't be able to produce fine enough lines to preserve the detail and sharp corners of the design. Does that make sense or am I underestimating the capabilities of current 3D printing tech?
I think the detail of a 3D printer should be fine. The question is rather if the design would fit on the printing bed. It's really big. And maybe time is a factor, but considering how long it took them to take all the small pieces out it should still be faster
“I just want you to do this part, so if it breaks, it’s not me!” 😂 Evan is so real for that haha. On another note, this is such a cute idea! I’d love to try it myself one day. Until then, I’ll just live vicariously through this video!
Katelyn has really great graphic art talents, i’d love to see more projects which include drawings and designs in the future. i love the idea of combining resin with drawings. it’s awesome!
First of all, this design is sooooo cute. Secondly, the editing in this video was really funny and sweet, it was so interesting watching this project come together! The comedic timing of the music and the cuts in-between were superb👏🏼🤧
As someone who does this semi-professionally (i make faux enamel pins with 3d printed frames & resin), here‘s some tips! - 3d print the walls - you can even do it in parts for bigger designs, & include the "floor" in the model, no leaks! - Use pipettes, not siringes, for finer detail as they‘re more accurate and will cause less dripping & air bubbles. For even FINER detail (some of our pins feature small text), drop bottles can be bought in bulk, have very fine needles & will have nearly no big air bubbles - For very small details esp when there‘s neighbouring voids of the same colour, you can include holes and / or tunnels for the resin to flow thru to fill them equally - we do this for all text generally! - The curing of some colours before others to avoid contamination like you did is a v good idea! Should some liquid resin spill onto the cured resin, acetone will get rid of it. Just make sure not to let too much of it sit bc it will also eventually eat into the cured resin 😅
This is super cool! For the next one, to make the separating of the cutouts easier, add extra cutlines in the most difficult areas, so instead of removing an entire wavy and complex shape at one, you remove parts of it. I do this when cutting complicated, thin designs from vinyl, and it helps a lot. And, for the next one, make it with translucent resin dyes and add a light behind it. I bet it would look amazing, kinda like a neon sign. ❤
When you guys inevitably do it again, consider two things: "resining" it onto a piece of *clear* acrylic so you can hang it up near a window (like stained glass) and cut out the "stencil" section on black acrylic so you have the lineart lines separating each color so its easier to see when you pour. Final result is awesome and super clean, its great you finally get a break and have a project work out well from the start !
Katelyn I have to say that ur editing humor has me rolling on the floor I love it so much especially the parts where u r mixing the resin would love to see you design some more things like this for resin projects maybe the next one you could do is you and Evan in your gaming logo and hang it in your gaming room
Adorable! 😻 I think you could have done this as a stained glass window too, or just added some led strips behind it to let it glow! For those without the facy machinery there is outline paint for glass painting that can be used. I saw another do it with a temp tattoo as guide, the outliner and uv-resin just a few days ago.
Doods!!!!! Paint by number has been around for longer than that. I got one when I was 10 in 1965. And Julia Robert's character used them in the film Mona Lisa Smile. It's so cute when young people discover stuff. It's the old saying "Everything old is new again." 💚
The love you have for your cat never ceases to brighten. My cat (who both looks and acts a lot like Joob) is pretty old and I've had her as long as I can remember. Her name is Stella, and even though you've never met or heard of her before, I am reminded of her and my love for her in every one of your videos I watch. Keep making memories with her as long as you can, and keep being unapologetically yourselves, I promise that even your most ridiculous videos mean something to someone.
If they still have the pieces that got cut out, I'd love to see them make another art piece with those! For example, painting the backs of them and sticking them all to a sheet of acrylic or wood. I think the clear acrylic would make the paint on the back of the pieces shine through and it would be fun to have it resemble those "animal mosaic" art pieces.
I absolutely LOVED this project ❤❤❤ Not just because it turned out great, but also because I’m a HUGE fan of Lisa Frank art. Kate’s design was so amazing that I would have thought Lisa Frank had made it. But above all else, I must admit, my favorite part of the video was the incredible singing of “I’m a Barbie Girl”. I was a little disappointed that I couldn’t hear more 😊😊😊
You really did Ger Purrship justice! Thank you for leaving in your struggles to show that even makers as experienced as the two of you can still run into problems that might require multiple refinements before you get the result you were aiming for.
Love you video as always!❤ A cool thing to do would be to take all the acrylic pieces you took out and do a resin outline (opposite to what you've done), and on the back have lights. That way the pieces are not a waste AND you get another cool sign with lights 😊
Yesss! I was thinking the whole time, "Wow, it would be much easier if they just added a bunch of laser-cut lines through the cut-out pieces so they didn't have to take those out in one big piece, but I guess this way they can use the cut-out pieces for something else!"... and then they didn't haha - it would have ben too much for one video but I'd love to see a follow-up (or on the second channel?) where they do something with them. Using them for an illuminated outline is a brilliant idea! I'd maybe paint the pieces black for higher contrast? But then they could totally do some of their LEDs behind it - maybe even colour changing ones? Eeee I wanna see it.
I was having an awful day and now at the end of it I get to watch a video from Evan and Katelyn and it is going to definitely be the highlight. Thank you and keep doing what you do.
Dudeeee the amount of effort you guys put into these videos is just insane-! Designing the stencil and then taking all of those pieces out must have taken forever! And then the edits where the drawing fades and only shows the colours that you were doing in the next little portion of the video is just so cool! You guys do not get enough credit honestly, you both are amazing❤
I love it! When I was sick a few years ago, I treated myself to a Lisa Frank coloring book and it brought back lots of childhood happiness! Very cute design, Katelyn 😻
Omg I cannot believe you own that as a blanket. That was my favorite folder of all time. Thank you lisa frank for providing 89% of my serotonin as a child.
Paint by Numbers: GODMODE 😮This project is crazy impressive. I would pay money to "use the bucket tool" in real life, that looked insanely satisfying! I'd say "you should sell this"...but with the work hours that go into one piece only the rich could afford an E&K resin paint-by-numbers kit. 😅 I audibly gasped at the reveal, what a stunning result. Katelyn's beautiful design and the pearlescent resin are a match made in heaven. ⭐ (Also if I had made this I would totally not have thought to pour that base layer of clear resin and the moment I started the first colour the outline would have shifted and smeared resin everywhere. 😆)
OMFG... I LOVE this. I am a HUGE Lisa Frank fan.... Her colorful artwork helped inspire me to become an artist when I was younger. I even Submitted a LF inspired design as my final in High School (I got an A). I now have my degree in Graphic Design and Multimedia :)
You guys should get some syringe tips for detail work. They come in super handy for tons of things. Get a variety from 14-20 gauge and that should cover pretty much any use. Definitely 14-16 gauge for resin. Love the videos!!
You guys making the coloring page available is the perfect opportunity to make a coloring contest! And you can make it a rule to follow the color by numbers style with a single color per section.
they had something similar to this in the early 2000s, it was like a diy suncatcher kit, you filled in precut acrylic pieces with paint syringes :) this was so nostalgic
I did kinda wanna see it backlit slightly, since it reminded me of those Suncatcher kits and the time you did Resin Stained Glass. BUt it came out great! The design is amazing!
This was fantastic! I love watching all the amazing things you decide should be resin and your amazing sponsor "commercials". There were a couple times when Katelyn was trying to be delicate and Evan was making all the sounds that freaked her out - my head started playing the song Cell Block Tango lol. "He had it coming... If you'd've heard it, you would have done the same!" I absolutely love how cute you both are together ❤
That paint by numbers shirt would be a great project for kids. They can color it in with fabric paints of their choosing. I loved this project. It seemed so fun!
I absolutely fell in love with the design and immediately ordered it, and I left a little note in the order but I wanted to expand upon it here. I'm chronically ill and sometimes it leaves me in bed for a day or two, or I'm so exhausted from health issues that I can barely function, but your videos always make me genuinely laugh. I love it all, from your (chaotic) playful energy, the jokes, how much fun you guys have on your projects, and how much you two hype each other up and support one another. Please, no matter what happens in life, make sure to stay silly
i have done so many paint by numbers and diamond paintings, like all the art work in my apartment is all the paintings ive done😂😆 ive even given them as gifts to ppl! idk what it is, it just helps my anxiety sm. its time consuming and takes a lot of focus, but its so chill, i could totally do it as my job i love it sm😆🤭
This reminds me of the stained glass painting kits. Not the peel and stick kind, but the ones that came with the design made as hard, clear plastic and you would fill it in with see-through paint and then hang it by a window. Those kits might actually work for resin too, come to think of it. In any case, beautiful work Katelyn and Evan! I love Lisa Frank style designs!
There are a couple companies that make watercolor paint by number kits for kids that are just like this with the raised outlines. They're usually ornaments, but sometimes you can find them in rectangular prints too. Lisa Frank actually used to have several back in the day. I seem to recall they had one with colored sand too, but I may have just used my colored sand in one of the watercolor ones. I loved doing Lisa Frank art projects.
I have watched so many of your videos while I work that my parrot is starting to sing the Resin Time song. Thanks for the entertainment and inspiration!
This is a way better version of the stained glass resin projects, have a transparent background and chuck in some led lights and new and improved stained glass/resin. I love the design!😁😁
I gave a little squeal of joy cause I too have that Lisa Frank beach towel and it’s still my fav! Loved this and for sure gonna have to get some of the merch. If you ever felt like doing a coloring book I’d buy that too!
I did this with the sun catchers from hobby craft (uk). They're clear acrylic with raised black borders and come with clear thick paints for them (just coloured glue) so instead I used resin and it was so much fun!
Ok, I’ve always loved every project E&K do but can we get a shout out for the consistently hilarious editing and the incredible cinematic masterpiece that is that Add!?
Beautiful work. I had a similar idea to 3D print a frame/design for a stained glass window, where the 3D print essentially acted as the lead, and the glass would be poured resin. And then you did your stained glass resin projects with wood, so that was really helpful to learn I should do a super thin clear layer first.
I loved this project! Thank you for all of the work that you guys put into these video's. You are both amazingly talented and your videos are so fun! We really appreciate you.
Well done! I tried resin "painting" with puffy fabric paint a couple years back, and couldn't get it tall enough to work. Glad you had a better time of it.
When you guys were removing the acrylic pieces from the outline it reminded me of these wood puzzles/building kits that I've done where you have to carefully punch out each piece from sheets of thin plywood and in those they suggest you use an exacto knife to cut the small bits that hold the laser cut pieces together so maybe that'd work good for this too
Download the art as a coloring page AND get the new Joob Paint-By-Numbers merch at shopevanandkatelyn.com/
(edit to add the coloring page)
Thank you for always creating amazing videos!! Y’all always make my day so much better ❤
@@jordi_Linsameeeeeeee
thx for making vids I like cats
I’ll ask my mom ❤️
0:37 that's a cute... towel? Blanket? Idk
You just have to appreciate Katelyn's design abilitys cus like.. HOW??
IKR LIKE KATELYN WE NEED YOU TO TELL US HOW YOU ARE THAT GOOD
Yess, she totally nailed the joobie design. She always makes stuff look so good.
Her secret is she's a graphic designer 😅
Not to mention the patience
For reallll!!
Katelyn makes the toughest design work look so effortless!
The fact that Evan response to katelyn panicking was to tell her he loves her so much 😭🥺 they are so sweet
Truly. This made my heart melt 🥺❤
I feel like that's Evans go to solution to anytime Katelyn is in distress, it's so sweet
@@TigerwomanXsweden What? I'm all for veganism but what the hell does that have to do with this?
@@thespankmyfrank their and your comment was so funny i'm sorry it's just so random it made me giggle
@@TigerwomanXsweden you do realise this is NOT how you get anyone to go vegan right???? No one likes crazy ass extremists.
Y’all!!! Do the paint by number on a white shirt so we can actually color it!!
Edited to add - the acting in the HelloFresh ad is S tier. Y’all are so talented
Do acrylics not work on black?
@@RaeneTheFaerieThey kinda do, but you'd get a lot of cracks in that paint job because that's a big surface area completely covered in paint. You'd run into the same problem with fabric paint. Fabric markers would work better, and you could still see the numbers underneath which would fit the aesthetic.
I think this project might have done well with a lightbox as background or perhaps in a window (unless the colors are too opaque)
Omg yes! A light box would fit the vide so well
so the clear lines would light up, I think that would look great.
They did a DIY 'stained glass' using resin in 2019 and it worked pretty good. (BUY vs DIY - Recreating Stained Glass with RESIN? on October 25th 2019, I'm not sure if I can link to it here.) They test it in sunlight at the end and (spoiler alert) it lets a lot of light through and performs about as well as the shop-bought stained glass kit, so definitely a good idea.
@@bobblebardsley They did that one with alcohol inks though. The powder pigments they used here are much more opaque.
@@snr0n Ah, good knowledge, I didn't pick up on that. Stained glass "which pigments work better" vid sometime maybe?
Evan laying on the floor to give “calming energy” is such a mood because I’ve never seen that dude calm😂 I think that was the only thing he could do.
Ps. I would still really like to see the cheesy pasta recipe please and thank you
Evan reminds me of a kid trying to help with cooking but only stirring and setting the table. You can tell they both are made for eachother❤
Beep bop... I'm the Philosophy Bot. Here, have a quote:
"The weak can never forgive. Forgiveness is the attribute of the strong"
~ Mahatma Gandhi
Reminds me of those old school "melt them in your oven" stained glass kits. Love it!
I've just discovered you two, so have been binging your videos the past few weeks. You're such a wholesome and hillarious couple. Just wanted to show some appreciation for all you do.
thank you so much!
Don't miss the mood ring toilet seat, truly a highlight in Evan and Katelyn history!
@@SnowPheasantAlso "cat patio" and the kitty hamster wheel if you're here for the supervisor and a fan of the ham 😋
@@els1f I came for DIY, I stay for ham
@@SnowPheasant Don't forget Little Lady Jesus 😂
Can we appreciate Katelyn's patience? Evan's "You are going to break it" chants and hindering would have gotten a smack from me so badly! Proves how solid they are as a couple. As for the paint by numbers, Katelyn's design is so cute!
Love this! It’s like a giant sun catcher… ya know the ones that come with the paint and plastic frame 😂 but you made it sooooo much better❤
That's exactly what it made me think of!
That's what I was hoping they were going to do with it 😂
I literally just commented about this unlocked memory😂
That’s were my head went to.
They've previously used those kits with the melty plastic, I'm so surprised they weren't just using one of those! I mean, I love the design details instead of the easy option, I was jut surprised!
An easier alternative might have been to 3D print your walls instead of laser cutting them. Either way, really cool idea! You looked like you really enjoyed it.
And a lot less waste!
That occurred to me too but I suspect that without a super expensive industrial rapid prototyper, their normal consumer 3D printer wouldn't be able to produce fine enough lines to preserve the detail and sharp corners of the design. Does that make sense or am I underestimating the capabilities of current 3D printing tech?
I think the detail of a 3D printer should be fine. The question is rather if the design would fit on the printing bed. It's really big. And maybe time is a factor, but considering how long it took them to take all the small pieces out it should still be faster
But, Glowforge sponsored that part of the video. That’s probably why they chose to use the glowforge.
3d print area are usually smaller than the work area of a laser cutter. Ender 3's are something around 8" square and a glowforge is 11"x19"
“I just want you to do this part, so if it breaks, it’s not me!” 😂 Evan is so real for that haha.
On another note, this is such a cute idea! I’d love to try it myself one day. Until then, I’ll just live vicariously through this video!
I think this would look great as a sun catcher so you could really see all of Joobys colors.
I love that this was supposed to be Evans first paint by numbers, but Kaitlyn took over five minutes in😂❤
I think you mean Evan gave up 5 minutes in 😂😂
Well, he said his back was starting to hurt from bending over like that.
Katelyn has really great graphic art talents, i’d love to see more projects which include drawings and designs in the future. i love the idea of combining resin with drawings. it’s awesome!
Put a light behind it and see how it looks please! 🥺 the clear acrylic is probably gonna light up really cool and maybe the resin as well a bit
This! Use LED or some light.
First of all, this design is sooooo cute. Secondly, the editing in this video was really funny and sweet, it was so interesting watching this project come together! The comedic timing of the music and the cuts in-between were superb👏🏼🤧
This is the only channel that i watch where i never skip the sponsor time, i love to have a good laugh😭
Exactly ❤
As someone who does this semi-professionally (i make faux enamel pins with 3d printed frames & resin), here‘s some tips!
- 3d print the walls - you can even do it in parts for bigger designs, & include the "floor" in the model, no leaks!
- Use pipettes, not siringes, for finer detail as they‘re more accurate and will cause less dripping & air bubbles. For even FINER detail (some of our pins feature small text), drop bottles can be bought in bulk, have very fine needles & will have nearly no big air bubbles
- For very small details esp when there‘s neighbouring voids of the same colour, you can include holes and / or tunnels for the resin to flow thru to fill them equally - we do this for all text generally!
- The curing of some colours before others to avoid contamination like you did is a v good idea! Should some liquid resin spill onto the cured resin, acetone will get rid of it. Just make sure not to let too much of it sit bc it will also eventually eat into the cured resin 😅
This is super cool! For the next one, to make the separating of the cutouts easier, add extra cutlines in the most difficult areas, so instead of removing an entire wavy and complex shape at one, you remove parts of it. I do this when cutting complicated, thin designs from vinyl, and it helps a lot.
And, for the next one, make it with translucent resin dyes and add a light behind it. I bet it would look amazing, kinda like a neon sign. ❤
I was thinking why they did not do that. seemed pretty logical to me, that it would make removal of the pieces much easier
When you guys inevitably do it again, consider two things: "resining" it onto a piece of *clear* acrylic so you can hang it up near a window (like stained glass) and cut out the "stencil" section on black acrylic so you have the lineart lines separating each color so its easier to see when you pour. Final result is awesome and super clean, its great you finally get a break and have a project work out well from the start !
Katelyn I have to say that ur editing humor has me rolling on the floor I love it so much especially the parts where u r mixing the resin would love to see you design some more things like this for resin projects maybe the next one you could do is you and Evan in your gaming logo and hang it in your gaming room
While I trust fully in Katelyn’s editing abilities, that hello fresh ad was a cinematic masterpiece ❤
Katelyn is an astounding designer. I love watching her work and the amazing designs she comes up with!
16:59, Amazing singing & humming!
Adorable! 😻 I think you could have done this as a stained glass window too, or just added some led strips behind it to let it glow!
For those without the facy machinery there is outline paint for glass painting that can be used. I saw another do it with a temp tattoo as guide, the outliner and uv-resin just a few days ago.
Doods!!!!! Paint by number has been around for longer than that. I got one when I was 10 in 1965. And Julia Robert's character used them in the film Mona Lisa Smile. It's so cute when young people discover stuff. It's the old saying "Everything old is new again." 💚
The love you have for your cat never ceases to brighten. My cat (who both looks and acts a lot like Joob) is pretty old and I've had her as long as I can remember. Her name is Stella, and even though you've never met or heard of her before, I am reminded of her and my love for her in every one of your videos I watch. Keep making memories with her as long as you can, and keep being unapologetically yourselves, I promise that even your most ridiculous videos mean something to someone.
If they still have the pieces that got cut out, I'd love to see them make another art piece with those! For example, painting the backs of them and sticking them all to a sheet of acrylic or wood. I think the clear acrylic would make the paint on the back of the pieces shine through and it would be fun to have it resemble those "animal mosaic" art pieces.
I was just thinking it'd be a cool reverse puzzle
I absolutely LOVED this project ❤❤❤ Not just because it turned out great, but also because I’m a HUGE fan of Lisa Frank art. Kate’s design was so amazing that I would have thought Lisa Frank had made it. But above all else, I must admit, my favorite part of the video was the incredible singing of “I’m a Barbie Girl”. I was a little disappointed that I couldn’t hear more 😊😊😊
next up: Rice krispies by numbers!
In Lisa Frank horror style 😂
if anyone can do it, those two can 😂
That's called a recipe
You really did Ger Purrship justice!
Thank you for leaving in your struggles to show that even makers as experienced as the two of you can still run into problems that might require multiple refinements before you get the result you were aiming for.
Please release a coloring book sheet of this print! I wanna color it in so bad!
they did!!!
They did!
Love you video as always!❤ A cool thing to do would be to take all the acrylic pieces you took out and do a resin outline (opposite to what you've done), and on the back have lights. That way the pieces are not a waste AND you get another cool sign with lights 😊
Yesss! I was thinking the whole time, "Wow, it would be much easier if they just added a bunch of laser-cut lines through the cut-out pieces so they didn't have to take those out in one big piece, but I guess this way they can use the cut-out pieces for something else!"... and then they didn't haha - it would have ben too much for one video but I'd love to see a follow-up (or on the second channel?) where they do something with them.
Using them for an illuminated outline is a brilliant idea! I'd maybe paint the pieces black for higher contrast? But then they could totally do some of their LEDs behind it - maybe even colour changing ones? Eeee I wanna see it.
I'm always intrigued by all your great video ideas (especially the ones involving resin). Huge fan, keep up the great work!
Honestly. This would be such a cool business idea. I’d absolutely buy a kit with a premade mold to do at home
Katelyn’s editing always cracks me up! Great job on this project guys, will definitely buy the LF inspired version of the shirt! ❤
I was having an awful day and now at the end of it I get to watch a video from Evan and Katelyn and it is going to definitely be the highlight. Thank you and keep doing what you do.
Evan asked, "Why do we do such complicated projects?".....quick answer: "Because Evan and Katelyn are extreme and awesome!"
evan & katelyn have the best sponsors in all of youtube no doubt, like they're the only ones i watch
Dudeeee the amount of effort you guys put into these videos is just insane-! Designing the stencil and then taking all of those pieces out must have taken forever! And then the edits where the drawing fades and only shows the colours that you were doing in the next little portion of the video is just so cool! You guys do not get enough credit honestly, you both are amazing❤
I love it! When I was sick a few years ago, I treated myself to a Lisa Frank coloring book and it brought back lots of childhood happiness! Very cute design, Katelyn 😻
I adore this, the concept and execution is perfect!
Omg I cannot believe you own that as a blanket. That was my favorite folder of all time. Thank you lisa frank for providing 89% of my serotonin as a child.
are you going to upload the picture so we can print it and color it ourselves? love this so much it looks great! 💕
Evan’s little *“hehe* hai” while looking into the top down camera was great.
I can already tell this is going to be an amazing video! Been watching you guys forever and love every video I watch
Paint by Numbers: GODMODE 😮This project is crazy impressive. I would pay money to "use the bucket tool" in real life, that looked insanely satisfying! I'd say "you should sell this"...but with the work hours that go into one piece only the rich could afford an E&K resin paint-by-numbers kit. 😅
I audibly gasped at the reveal, what a stunning result. Katelyn's beautiful design and the pearlescent resin are a match made in heaven. ⭐
(Also if I had made this I would totally not have thought to pour that base layer of clear resin and the moment I started the first colour the outline would have shifted and smeared resin everywhere. 😆)
Looks amazing 👍 Have you considered putting light behind it? I think it would look even better ❤️
OMFG... I LOVE this. I am a HUGE Lisa Frank fan.... Her colorful artwork helped inspire me to become an artist when I was younger. I even Submitted a LF inspired design as my final in High School (I got an A). I now have my degree in Graphic Design and Multimedia :)
That face Evan made after she said that it's too big to fit. 🤣
Just imagine how *magical* it would look with light or the sun behind it!
Nobody tell them about the paint-by-number stain glass kits. This is way more entertaining.
You guys should get some syringe tips for detail work. They come in super handy for tons of things. Get a variety from 14-20 gauge and that should cover pretty much any use. Definitely 14-16 gauge for resin. Love the videos!!
You guys making the coloring page available is the perfect opportunity to make a coloring contest! And you can make it a rule to follow the color by numbers style with a single color per section.
You did SUCH a good job drawing Joobs in the Lisa Frank style!
You should make one to hang in the window so the light shines through
The line art merch is not only cute but super functional and would be perfect for people to try and paint it themselves, like a shirt paint by number
Remove the frame, hang it in a window and let the sun play through it!
they had something similar to this in the early 2000s, it was like a diy suncatcher kit, you filled in precut acrylic pieces with paint syringes :)
this was so nostalgic
Evan & Katelyn are slowly turning in to "that" type of channel...💀
I did kinda wanna see it backlit slightly, since it reminded me of those Suncatcher kits and the time you did Resin Stained Glass. BUt it came out great! The design is amazing!
This was fantastic! I love watching all the amazing things you decide should be resin and your amazing sponsor "commercials". There were a couple times when Katelyn was trying to be delicate and Evan was making all the sounds that freaked her out - my head started playing the song Cell Block Tango lol. "He had it coming... If you'd've heard it, you would have done the same!" I absolutely love how cute you both are together ❤
That paint by numbers shirt would be a great project for kids. They can color it in with fabric paints of their choosing. I loved this project. It seemed so fun!
I love that editing-you left in singing "Barbie Girl". It was out of nowhere and sparked a lot of joy.
(The song randomly pops into my head too)
Kaitlyn's vector drawing and design skills are super amazing!
I absolutely fell in love with the design and immediately ordered it, and I left a little note in the order but I wanted to expand upon it here.
I'm chronically ill and sometimes it leaves me in bed for a day or two, or I'm so exhausted from health issues that I can barely function, but your videos always make me genuinely laugh. I love it all, from your (chaotic) playful energy, the jokes, how much fun you guys have on your projects, and how much you two hype each other up and support one another.
Please, no matter what happens in life, make sure to stay silly
Katelyn flexing those Illustrator skills!! Such a cute design!
I had so much Lisa Frank stuff growing up so this whole thing made me endlessly happy
i have done so many paint by numbers and diamond paintings, like all the art work in my apartment is all the paintings ive done😂😆 ive even given them as gifts to ppl! idk what it is, it just helps my anxiety sm. its time consuming and takes a lot of focus, but its so chill, i could totally do it as my job i love it sm😆🤭
I like the Lisa Frank design. Its so CUUUTTEE!!!
I have to say this INSANELY cute design has to make this my favourite of your projects
0:09 0:28 0:39 X4 0:41
forager sounds??? (forager is a game on steam)
This reminds me of the stained glass painting kits. Not the peel and stick kind, but the ones that came with the design made as hard, clear plastic and you would fill it in with see-through paint and then hang it by a window. Those kits might actually work for resin too, come to think of it. In any case, beautiful work Katelyn and Evan! I love Lisa Frank style designs!
Exactly! I don't understand why they called it paint-by-numbers, it's just like those plastic designs.
E&k and ten hun r the only channels whos ads u cant skip ❤❤❤
I feel like y’all combined paint by numbers AND those diy sun catcher kits! Plus the Lisa Frank inspired design made this super nostalgic
You two make me less jaded about real life romance and relationships. For real relationship goals, loves
There are a couple companies that make watercolor paint by number kits for kids that are just like this with the raised outlines. They're usually ornaments, but sometimes you can find them in rectangular prints too. Lisa Frank actually used to have several back in the day. I seem to recall they had one with colored sand too, but I may have just used my colored sand in one of the watercolor ones. I loved doing Lisa Frank art projects.
I love how much you guys love each other! It’s really beautiful x
10/10 been so long since a project has gone without a hitch! Must be super rewarding!!
I have watched so many of your videos while I work that my parrot is starting to sing the Resin Time song. Thanks for the entertainment and inspiration!
In 2022 my husband had the same stroke
following a chiropractic adjustment.
The recovery has been hard.
you are doing fantastic!
This is a way better version of the stained glass resin projects, have a transparent background and chuck in some led lights and new and improved stained glass/resin. I love the design!😁😁
I gave a little squeal of joy cause I too have that Lisa Frank beach towel and it’s still my fav! Loved this and for sure gonna have to get some of the merch. If you ever felt like doing a coloring book I’d buy that too!
Gives me those window sun catcher vibes. Looks so 90's, I love it. God bless!
The new style of editing is a vibe!
It's almost Puffy Paint! 10/10 for 90s Lisa Frank!!!
I did this with the sun catchers from hobby craft (uk). They're clear acrylic with raised black borders and come with clear thick paints for them (just coloured glue) so instead I used resin and it was so much fun!
Ok, I’ve always loved every project E&K do but can we get a shout out for the consistently hilarious editing and the incredible cinematic masterpiece that is that Add!?
Beautiful work. I had a similar idea to 3D print a frame/design for a stained glass window, where the 3D print essentially acted as the lead, and the glass would be poured resin. And then you did your stained glass resin projects with wood, so that was really helpful to learn I should do a super thin clear layer first.
I loved this project! Thank you for all of the work that you guys put into these video's. You are both amazingly talented and your videos are so fun! We really appreciate you.
Well done! I tried resin "painting" with puffy fabric paint a couple years back, and couldn't get it tall enough to work. Glad you had a better time of it.
Absolute respect for doing that on illustrator, it came out so nice
Evan and Katelyn can literally do anything with resin
When you guys were removing the acrylic pieces from the outline it reminded me of these wood puzzles/building kits that I've done where you have to carefully punch out each piece from sheets of thin plywood and in those they suggest you use an exacto knife to cut the small bits that hold the laser cut pieces together so maybe that'd work good for this too
Such a wonderful idea! I can see you exploring a glow-in-the-dark hidden-picture sort of effect.
Katelyn singing Barbie Girl to herself as she tasks is fantastic!
This is the adult version of the diy suncatcher kits that I used to make as a kid and I love everything about it.