Hello Lance, I'm Hüseyin from Bergama, İzmir, Turkey. Firstly, I appreciate you for your information in your perfect TH-cam videos. Mechanics say that you can not do this yourself or this machine can't be repeired but you make it possible for me thanks to your videos. Thank you so much for all these. I have a problem to ask you. I have a tractor, 1969 Massey Ferguson 135. Its problem is that hydraulics is not working properly when I declutch. Although a lot of people say that this work is so hard and even mechanics can not do that. After my searches, I set to work. I repaired and changed a lot of worn and eroded pieces of my tractor that also involved hydraulic pump. While I am doing these, you started to repair the same model and system tractor, so I was happy so much for that. Because in the videos I watched and my a lot of searches, I couldn't find hydraulic lift setting and repairing on this model and system. Despite I wasted my time, I saw that you didn't show setting hydraulic lift in your Massey 135 tractor in your videos. Do you have a video about that or didn't you make this video? I am looking forward this video. Because I tuned up according to other videos but they aren't same with my tractor. So I think it isn't working properly. I wish you continued works and take care of yourself.
G Day Huseyin, No I didnt do a video on that yet as on the 135 6 speed I just took the top from the 135 Multipower and used that as it was working well and it was cheaper than repairing my old one. I will do one one day but not at the moment Im sorry.
Thank you for another great video! Question: I have a 135 that has a hydrolic hookup under the seat. But can't find out what fitting it is. Would you happen to know what it is?
G Day Ray, Possibly the little roller or the rivet holding the arm on the control valve may have come off. Check by removing the r/h side plate and working the valve by hand.
@@BundyBearsShed did that and 3 point works when you push back on the lever. Roller in place as it should be. No response to the levers. Thanks lance (massey club meetings include lots of bundt quotes)
@@rayseals8764 That tells us the top cover needs to come off and the rollers in the top cover need to be looked at as you have just proved the hydraulics are working.
good day.. I follow your videos with admiration..our tractor is Massey Ferguson 148 Spanish.. we have a problem like the video in the link I posted below. When the cultivator is attached, the hydraulics should rise up to a certain level and go down automatically, but it continues to rise. What could be causing the problem? I would be grateful if you could help.. thanks..
Hello, i am looking for the part called Pressure Control Valve for the Massey Ferguson 152 tractor, în your video the part is on Lift Cover, the one with orange color. Can someone help me find that part, because I've been looking for it for a ling time and I can't find it anywhere to buy it.
Yes in position control it will try to maintain a steady level. If the main piston is leaking or the O rings on the stand pipe are leaking it will lower slightly then it senses that and tries to maintain the level you set the lever at. The easiest and cheapest thing to look at is the stand pipe o rings. The 135 6 speed restoration fitting the lift cover might show you where the stand pipe is. or email me on the bundybearsshed@gmail.com if you get stuck.
@@BundyBearsShed i removed the lift cover, and the hydraulic pump. Pump is wrecked. The pump that i pulled out was a M1 pump and my replacement is a M2... wil it stil work? All the dimensions are the same.
If it is a multipower yes it is there ready to go, If not a mulltipower it can be done but it has to be done a different way. There is valves you can buy to set it all up.
Καλησπέρα έχω ένα ίδιο δεν μπορώ να το κάνω να δουλέψει άλλαξα καπάκι γιατί έσπασε δεν ρυθμίζω κάτι καλά δεν ξέρω μπορείτε να με βοηθήσετε.. ευχαριστώ πολύ
Hello Lance, I'm Hüseyin from Bergama, İzmir, Turkey. Firstly, I appreciate you for your information in your perfect TH-cam videos. Mechanics say that you can not do this yourself or this machine can't be repeired but you make it possible for me thanks to your videos.
Thank you so much for all these. I have a problem to ask you. I have a tractor, 1969 Massey Ferguson 135. Its problem is that hydraulics is not working properly when I declutch. Although a lot of people say that this work is so hard and even mechanics can not do that. After my searches, I set to work. I repaired and changed a lot of worn and eroded pieces of my tractor that also involved hydraulic pump. While I am doing these, you started to repair the same model and system tractor, so I was happy so much for that. Because in the videos I watched and my a lot of searches, I couldn't find hydraulic lift setting and repairing on this model and system.
Despite I wasted my time, I saw that you didn't show setting hydraulic lift in your Massey 135 tractor in your videos.
Do you have a video about that or didn't you make this video? I am looking forward this video. Because I tuned up according to other videos but they aren't same with my tractor. So I think it isn't working properly.
I wish you continued works and take care of yourself.
G Day Huseyin, No I didnt do a video on that yet as on the 135 6 speed I just took the top from the 135 Multipower and used that as it was working well and it was cheaper than repairing my old one. I will do one one day but not at the moment Im sorry.
@@BundyBearsShed thank u for replying, Lance.
Thank you for another great video!
Question: I have a 135 that has a hydrolic hookup under the seat. But can't find out what fitting it is. Would you happen to know what it is?
I think it would be 3/8" BSP
thanks man i learn alot from you sir
Thanks, Thats why I do the videos.
Mf 180 backed Bush cutter in to a dirt bank, 3 point stoped working. New pumps, everything just rebuilt before this happened. Any suggestions. Thanks
G Day Ray, Possibly the little roller or the rivet holding the arm on the control valve may have come off. Check by removing the r/h side plate and working the valve by hand.
@@BundyBearsShed did that and 3 point works when you push back on the lever. Roller in place as it should be. No response to the levers. Thanks lance (massey club meetings include lots of bundt quotes)
@@rayseals8764 That tells us the top cover needs to come off and the rollers in the top cover need to be looked at as you have just proved the hydraulics are working.
@@BundyBearsShed thanks lance
We pulled the top cover finally and are stumped so far. Tomorrow will go looking for parts in bottom of the trans.
The Multipower internals sure look good!
They do indeed,
A tip: you can watch series at Kaldrostream. Been using them for watching lots of of movies recently.
@Dane Bruno Yup, been watching on Kaldrostream for since december myself :D
good day.. I follow your videos with admiration..our tractor is Massey Ferguson 148 Spanish.. we have a problem like the video in the link I posted below. When the cultivator is attached, the hydraulics should rise up to a certain level and go down automatically, but it continues to rise. What could be causing the problem? I would be grateful if you could help.. thanks..
I would pull the rh side cover and see what is going on in there, that might give you a clue.
❤🎉
👍
Thanks Lance another great video.
Thanks Jimmy.
Good job Sir thanks 🇮🇳👍😁🚜
Thanks Abdul
@@BundyBearsShed you welcome sir 🇮🇳😁
Hello, i am looking for the part called Pressure Control Valve for the Massey Ferguson 152 tractor, în your video the part is on Lift Cover, the one with orange color. Can someone help me find that part, because I've been looking for it for a ling time and I can't find it anywhere to buy it.
Try genuine AGCO
Hi! Is got a MF 133 and the lift arms are bouncing when i use them... do You now what it could be.
Yes in position control it will try to maintain a steady level. If the main piston is leaking or the O rings on the stand pipe are leaking it will lower slightly then it senses that and tries to maintain the level you set the lever at. The easiest and cheapest thing to look at is the stand pipe o rings. The 135 6 speed restoration fitting the lift cover might show you where the stand pipe is. or email me on the bundybearsshed@gmail.com if you get stuck.
@@BundyBearsShed i removed the lift cover, and the hydraulic pump. Pump is wrecked. The pump that i pulled out was a M1 pump and my replacement is a M2... wil it stil work? All the dimensions are the same.
Do u have any videos on MF 290 hydraulic repairs
No I dodnt , never owned one to play with.
we are getting one of these for our cottage. Its our first tractor and I have been trying to find out if auxiliary hydraulics can be added?
If it is a multipower yes it is there ready to go, If not a mulltipower it can be done but it has to be done a different way. There is valves you can buy to set it all up.
@@BundyBearsShed its a 3spd non synchro
Hello my multi-power MF 148 won’t lift anything for some reason.
Do you know what it could be? Thanks
Start with oil and filter first then see if the control valve is working.
Καλησπέρα έχω ένα ίδιο δεν μπορώ να το κάνω να δουλέψει άλλαξα καπάκι γιατί έσπασε δεν ρυθμίζω κάτι καλά δεν ξέρω μπορείτε να με βοηθήσετε.. ευχαριστώ πολύ
I have not done the video yet on a lift cover but just bought the genuine tools so hopefully it wont be too far away.
Any lead to a complete mf135 M1 Complete hydraulic system to reach me...#kenya#
No Im sorry.
more coffee
I needed Mr Muscle.