Shit I didn't realise you already had the pin removal tools, oh well didn't cost me much. I did put my username on the delivery name but don't think you saw it. Enjoy!
Hey Jimmy you guys are awesome all together.. I'm from South Africa I would love to just hang out with you guys for a day would be sweet.. Lol so me and Donald can do some vaping.
Why is the drain plug on the new pan facing horizontally? I hate even the ones that are at 45 degree angle, cause you have to move the drain pan as it drains. I love my Volvos with the vertical plugs on the bottom of the pan.
If you are replacing the cams/rocker arms you will want to recheck the shim clearances, also if you replace the cam caps you should have them lined bored to the head.
The reason a lot of the manifolds crack is due to them being tig welded - I have a friend who is insane at fabbing, he always welds them with a stick welder at the flange and some other crucial places, since those welds are softer than the tig. Thats they key to making them hold.
I still say orange like the McLaren volcano orange. Or there is a bright green from the new vipers a few years ago. They are bright Andrew high flake and are super nice colors.
*On your way back from Florida, do speed limit, Dont want you getting a reckless driving ticket. I forgot what state Marcus got his . BTW e36 looks way better with those smoked corner lights. You should look into some smoke tails too, theyre pretty cheap*
Jimmy, would you happen to know the difference between the weight of a 1jz vvti or a stock vg30? There’s a 1jz swap project 300zx that’s catching my eye, but I’m curious to see what happens to the nose’s weight. I got curious after you did the sr swap on the fairlady. Thanks man keep up the great content!
Yo Jimmy with your history for SR's, have you always beat them up stock or did you ever build your bottom end? Thinking about going forged internals on my red top man
The torque spec on those cam caps are only supposed to be 7 or 8 ft lbs, people always burn up heads by tightening them too much and not to spec. If you're going with a new head and new cams I would deff figure out how to measure the shims and reshim everything / make sure they are in spec. I'm sure you already know but all those clearances up top will make or break an SR, also look into dual rocker guides, it's a pretty common thing done on SRs, I had it on my personal sr and had no issues with throwing rockers. Rev limiter was at 8k, made 430+whp and I smashed limiter all day without RAS (thumbs up)
Right as I started to type you literally said the color I was going to say! I was thinking maybe a hot boy candy apple green..? Think it would look hot against all the black!!
Ayyyyeee!!! Glad you got the slaps and stuff!!
SpooledUp. TV where can i get the stickers??
Yoooo!! Spooledup.bigcartel.com my friend!!
7:19 for the boys.
thats a phat ass windshield :DDD
Lovin that “windshield”
Jimmy why not add a oil cooler also? Keeps temps down plus you get even more oil capacity
I second this.
I 4th this
Pineapple Yellow/Gold for the valve cover! 👌
Man, RJs sister must be pretty cool to pretend to be his girlfriend for the channel
Bullwon 😂😂😂😂
Ayyyy Thanks Jimmy for the shout out! It’s pronounced HI-SH-MEN (Heischman)!
For the valve cover coler go for gold silica but write down the wrong color code and get it millennium jade
You have a pineapple hanging on the wall paint the valve cover that color with green spark plug wires.
Pineapple yellow metalic valvecover!!
Green with gold flake on the valve cover
Jesus didn't know DJ had that long of hair
naijaflavor60 same
That 🎂 keeps making comebacks haha
Honestly the best car content on TH-cam lately keep it up I'm loving the builds I cant wait to see the end result of the s13
Get the cover dipped with pineapples on it
I second this
I third this
Really good idea
Keep up the fire content man 🔥 you're easily my favorite youtuber right now, and all your friends are so great too 💕
100% agreed!
Shit I didn't realise you already had the pin removal tools, oh well didn't cost me much. I did put my username on the delivery name but don't think you saw it. Enjoy!
ratgreen i sent those
Ruben Santana what the first lot? Cos I can see my username just about on the delivery name in the video at like 0:24 jimmy oakes ratgreen
"Look at donalds windsield" fuckin savage
Pineapple 🍍 themed value cover
Yes! Love Sunday uploads! Thanks Jimmy
holy shit donalds hair is long. wonder if its longer than steph’s hair 🤔
Steffie bum nice
Hey Jimmy you guys are awesome all together.. I'm from South Africa I would love to just hang out with you guys for a day would be sweet.. Lol so me and Donald can do some vaping.
Howzit xD
Awe
A great way to organize all the small parts is ice cube trays. Keeps everything nice and neat.
Jimmy O! The man! The inspiration! The legend!
9:20 I was totally thinking green even before Jimbo said it. Do like a lime green or a nice bright green with metal flake in it.
Get that S14 running!
YO WHAT THE FUCK WHEN DONALD TOOK OFF HIS BEANIE I DID NOT KNOW HE HAD THAT MUCH HAIR. DAMN.
s13 valve cover i say do a hydro dipped pinapple but close up so its bright yellow to a green top detailed and your own way of course
green with gold flake
Why is the drain plug on the new pan facing horizontally? I hate even the ones that are at 45 degree angle, cause you have to move the drain pan as it drains. I love my Volvos with the vertical plugs on the bottom of the pan.
jimmy use dawn dish soap to clean oil amd grease works so good
broo they look exactly like the first time you painted the corners ahaha! literally the exact same
If you machine polish the headlights they'll tie in better with the smoked corners, they look a little dull in comparison
Am i the only one who thinks the new smoked tints look more blue than the vht did 😂
You should try an emerald green metallic for the valve cover. It would look pretty sick.
What’s good jimmy? Love your content!
I’ve seen (and done) that front shield removal to reduce chain rattle against it
If you are replacing the cams/rocker arms you will want to recheck the shim clearances, also if you replace the cam caps you should have them lined bored to the head.
Ya. We are in new england .one of my bmws are Boston green. Car color is amazing, if u looking for a green that's the one oakes
looks way better with the new corners great choice buddy
that windshield shot at 7:21 is great!
You’re the man, Oakes!
The reason a lot of the manifolds crack is due to them being tig welded - I have a friend who is insane at fabbing, he always welds them with a stick welder at the flange and some other crucial places, since those welds are softer than the tig. Thats they key to making them hold.
put a mean a$$ cam and strong springs in the SR, if you gotta change stuff anyways!
I still say orange like the McLaren volcano orange. Or there is a bright green from the new vipers a few years ago. They are bright Andrew high flake and are super nice colors.
At least you were able to see your cam😢 #BRINGCAMBACK
Dylan Willey Good one bro
LOVE YOU JIMMY!!!!!
*On your way back from Florida, do speed limit, Dont want you getting a reckless driving ticket. I forgot what state Marcus got his . BTW e36 looks way better with those smoked corner lights. You should look into some smoke tails too, theyre pretty cheap*
Jimmy out there for the boys.
Hyper gold on the valve cover would look sick. Keep up the awesome content man.
Jimmy, an "anti-smoke" guy?? Haha that's a good one...
Aaaaaaddddddeerrrrallllll
7:21. Dammm giving one for the team!!
Do pineapple yellow for the valve cover. Or get crazy and do like yellow to green fade valve cover
What color you doing for the engine bay ? If your doing it black then I would say green or orange
hey jimmy did you ever get the window motor for the bmw? a junk yard by me has 2 '92 325i's if you want me to grab you one
"Look at Donalds winsheild."
"Got emm!"
ROFL!
For the color of the valve cover you should do a slightly darker lime green with flake
Jimmy, would you happen to know the difference between the weight of a 1jz vvti or a stock vg30? There’s a 1jz swap project 300zx that’s catching my eye, but I’m curious to see what happens to the nose’s weight. I got curious after you did the sr swap on the fairlady. Thanks man keep up the great content!
Where’s drew tube?!
It happens when the Moto for 2018 is "just gonna send it"
Ay jimbo try normal black spray paint on the old corners with clear coat and cut and buff em. 🔥🔥
Look at donalds windshield. Got eeeemmmmm
paint your valve cover a nice dark blue that would look fire.!
Yo Jimmy with your history for SR's, have you always beat them up stock or did you ever build your bottom end? Thinking about going forged internals on my red top man
I was gonna say magenta for the valve cover but yeah, green for sure, would look sick.
jimmy!! open the clear markers and pint black the in side that is nickel ,it can look like the head headlights
Make your valve cover pineapple, obviously! Yellow with an orange textured finish!
Best TH-cam channel, love every upload!!
Look at donalds windshield. "Gott eeeem" my dude! Lol
The torque spec on those cam caps are only supposed to be 7 or 8 ft lbs, people always burn up heads by tightening them too much and not to spec. If you're going with a new head and new cams I would deff figure out how to measure the shims and reshim everything / make sure they are in spec.
I'm sure you already know but all those clearances up top will make or break an SR, also look into dual rocker guides, it's a pretty common thing done on SRs, I had it on my personal sr and had no issues with throwing rockers. Rev limiter was at 8k, made 430+whp and I smashed limiter all day without RAS (thumbs up)
Go with yellow and green, for Pineapple
Wrinkle paint only takes 30 mins just bake it in the oven. I think at 350 comes out amazing too
Got to love DJ and RJ
Steph 💘
Do the sidemarkers housing black to to match the headlights
Why dont you do black housings on the clear corner lights?
How about an orange for the value cover? Like a matt
The sneaky ass shot LMAO
GOT EEEEM
what about a anodized orange for the valve cover
7.09 HELL YEA lucky boy Jimmy
Jimbo those new corners look the same(on camera) as the vht smoked corners
I sent you something for the e36 jimmy. I think you'll dig it.
Right as I started to type you literally said the color I was going to say! I was thinking maybe a hot boy candy apple green..? Think it would look hot against all the black!!
Do like a candy yellow with flake for the valve cover that shit would look moist
Send it on the green! But do a dark green like dons s14 would look 🔥 with the black
7:19 wild bootaay appears 🤫
Yellow valve cover with green lettering for a pineapple look. Or vise versa on the colors.
paint the valve cover puke green like Mr.Bean's car 😂😂
Pineapple colors for valve cover. Yellow with green
that's WAAY too much RTV :O it squeezes out on the inside like on the outside.. I had to learn it too, but
Jimmyoaks im glad you uploaded today I have been having a horrible day
do a royal blue with a little bit of gold flake for the valve cover
7:21 jimmys the GOAT
Pineapple yellow and green plug wires for the valve cover, hot boi af
What about mint valvecover?
Jimmy you a fool for that windshield shot😂😂😂😂
Fuck yes perfect way to start Sunday
Either a skyblue with sparkles or lime green with some red pin striping
💪💪💪💪jimmy much love bro