Excellent job on the actual install. Besides ensuring that the blades are properly oriented - perpendicular to one another - which others have mentioned, I'd suggest starting her up and briefly checking that the belts are running smoothly while you can see them. That is, BEFORE replacing the cover. Also, the control cables are notorious for breaking due to moisture & rust; so I use maintenance episodes like this to lubricate the inside of the cables to extend their life.
This helped me replace mine. But when I tried to get the bolt in the back the belt was too tight. I had to remove the pulley to the left and also remove the belt to tighten the two bolts that hold the pulley bracket. Then I had to install the left pulley, fight the belt back on and then use the bolt to tighten the belt. Not sure if my belt is too small but my pulley broke after about 20 mows.
Your Timemaster videos have been very helpful. Just bought a used Timemaster and first up had to replace a belt. I've searched everywhere - do you know what the rpm range is on the Timemaster?
Excellent job on the actual install. Besides ensuring that the blades are properly oriented - perpendicular to one another - which others have mentioned, I'd suggest starting her up and briefly checking that the belts are running smoothly while you can see them. That is, BEFORE replacing the cover.
Also, the control cables are notorious for breaking due to moisture & rust; so I use maintenance episodes like this to lubricate the inside of the cables to extend their life.
Bro you are very detailed, but fast and that's what we like,,,
You might want to add to the video about a lining, up the cutting blades in the right place before tightening up the belt.
Exactly was I needed. I had to replace my pulleys today and thanks to your video it was wasy.
perfect video. subscribed just because of this video. excellently shot, explained, and very helpful.
This helped me replace mine. But when I tried to get the bolt in the back the belt was too tight. I had to remove the pulley to the left and also remove the belt to tighten the two bolts that hold the pulley bracket. Then I had to install the left pulley, fight the belt back on and then use the bolt to tighten the belt. Not sure if my belt is too small but my pulley broke after about 20 mows.
Your Timemaster videos have been very helpful. Just bought a used Timemaster and first up had to replace a belt. I've searched everywhere - do you know what the rpm range is on the Timemaster?
You saved me a bunch of time! Thank you
Thank you very helpful
Never aligned the blades
Do you have a video to replace the upper pulley blade pulley. The little black pulley that drives and attaches to upper belt?
Not yet, however it would not surprise me to have one down the road 🤔.
Thank you this was so helpful 😀
Thanks bro