Use to build speaker enclosures the same way 25 years ago made some awsome footwell pods door pods rear boot builds ...messey stinky itchy thank god dont do mess around now 😂
Work os great, but I think lip is to wide it missmatch line of the car. If you made side lips to match wideness Its OK! However U really did a awesome job!
I drive a lancer and I can't ever find lips for the bumper sides that come down. Looking to put lips under just them and leave the middle how it is. Thanks for the inspiration.
Needs some side skirts and that diffuser (assuming you also made that) needs to extend out to the whole side of the car so it lowers that rear another inch or two so the whole car is leveled out 😎
Appreciate the inspiration, I'm building a custom side louvers with my 3d printer they jus don't make em for my vehicle and I wantd to fiberglass them for durability the process uve shown has give me that extra pep I need to feel comfortable continuing if all works out I'm make rear window louvers and that will be epic I'd be the only 2017 ford.... with em 🤣🤣🤣
Gracias, bueno estoy planeando cambiarle el color al carro pero todavia no me decido que color, por eso lo estoy dejando asi como esta, yo se que se ve feo pero ese color es temporal nomas.
Enjoyed the video. I've been watching videos on making lip's, spoilers etc. Problem is I don't know how to start and what exactly Is I would need. Would you mind helping me out with a list of things that would help getting started? And where I could probably get fiberglass cloth?
Yeah sure, you can buy fiberglass on amazon or ebay, so this is what you need, ( fiberglass chopped strand mat cloth, fiberglass resin, Bondo body filler, chip paint brush, sandpapers, gloves and 3m paint respirator ) now if you wanna make a front bumper lip side skirts or anything, just watch a lot of different videos to get an idea of how you can start your project, that's my advice
Muchas Gracias, me tardé mas o menos como en 8 meses porque no lo hacía todos los dias, solo lo estaba haciendo en mis tiempos libres, pero si uno se enfoca muy bien y lo haces todos los dias, el trabajo talvez lo haces en 2 semanas
Wow this is so amazing I got so many great ideas from this. I've been trying to fabricate custom parts but using that mold release agent and gel to make your own is such a better idea. I just need to look more closely at what all materials you used and where do you get them?
The fiberglass, PVA release agent, mold release, and the Q-cell filler, i bought all this at Amazon and ebay and the rest of the stuff i bought them at the local store
Fiberglass Chopped Strand Mat Cloth, Fiberglass Resin and Hardener, WHITE GELCOAT NO WAX with Hardener, PARTALL FILM #10 (PVA) Mold Release Agent, MOLD RELEASE WAX, DING ALL Q-Cell Filler and Bondo Body Filler. These are all the products that i used
Waw all you need to know about how not to make a front lip, perhaps some of the money wasted could have been used to replace the bald tyres on the car.
at first I thought..... naaaaah.... THEN in the End ... FUCKIN AWESOME JOB !!! 🙂
Thank you my friend
Use to build speaker enclosures the same way 25 years ago made some awsome footwell pods door pods rear boot builds ...messey stinky itchy thank god dont do mess around now 😂
Yeah that's the only part i hate about fiberglass, it makes you itch every time you touch it
@@chiquitademivida some skills you got buddy 👌
Thank you👍
11
@11chiquitademivida
Good work, I’m going to be making one for my OBS Chevy in the spring and this really helped understand the steps!
Thank you and i wish you success with your project
This is badass! He should make a mold and sell those puppies for $800 a pop considering it fits a Benz!
Not a bad idea👌
nice dude, alot to be learnt from here thanks.
You're welcome 👍
Outstanding work and craftsmanship. Patience and attention to detail. Truly. When is the painted and completion video coming??
I don't know yet, i'm gonna start working on the side skirts now and after that i'm thinking about wrapping the car
Nice! Can't wait bro. Truly amazing work again. 👌 Looking forward to the next video.
Thank you👍
I was wandering where you were going with this when you started, but bro that is an outstanding job! A lot of work and attention to detail!! Awesome!!
Thank you
Sou seu fã. Fantástico trabalho
Thank you👍
Hermoso trabajo tienes mucha paciencia
Muchas gracias mi amigo y pues no nos queda de otra 😂
Great job man
Thank you
Beautiful job very nice ❣️🙂 you are amazing with it
Thank you
Work os great, but I think lip is to wide it missmatch line of the car.
If you made side lips to match wideness Its OK!
However U really did a awesome job!
I did it like that because my goal is to make a wide body kit, but that's a good point thank you
Great great job
Thank you
I drive a lancer and I can't ever find lips for the bumper sides that come down. Looking to put lips under just them and leave the middle how it is. Thanks for the inspiration.
You're welcome
Now this is the video I've been searching for. You saved my lip project!
I'm glad, i wish you the best in your project 👍
Cara parabéns pelo trabalho muito da ora
Thank you
We'll done my friend looks great 👍
Thank you
Absolutely great skills that didn't do the car any good esthetically
Thank you for your comment
Needs some side skirts and that diffuser (assuming you also made that) needs to extend out to the whole side of the car so it lowers that rear another inch or two so the whole car is leveled out 😎
Yeah i made that diffuser too and side skirts is gonna be my next project, thank you for your advice i will keep it in mind 👍
Appreciate the inspiration, I'm building a custom side louvers with my 3d printer they jus don't make em for my vehicle and I wantd to fiberglass them for durability the process uve shown has give me that extra pep I need to feel comfortable continuing if all works out I'm make rear window louvers and that will be epic I'd be the only 2017 ford.... with em 🤣🤣🤣
I'm glad to hear that, i wish you success in your project
7:30 what is present in that metal container you poured in that plastic bowl ??
7:41 what is present in those tubes
7:30 is fiberglass resin
7:41is a hardener for fiberglass resin, when you buy the fiberglass resin is already comes with the hardener
👏 perfect perfect 😎✌🇧🇷
Thank you
Que talento
Si verdad? Gracias 🙂
Hard work huh? Looks good. It's my next project for my Cadillac ATS.
Yeah and you just have to have patience because it takes time, i hope everything goes well in your project and don't give up
Ebay can also👍
Esta bacan,solo el color esta chillon,
Gracias, bueno estoy planeando cambiarle el color al carro pero todavia no me decido que color, por eso lo estoy dejando asi como esta, yo se que se ve feo pero ese color es temporal nomas.
Eso es todo
Eso si 👍
Enjoyed the video. I've been watching videos on making lip's, spoilers etc. Problem is I don't know how to start and what exactly Is I would need. Would you mind helping me out with a list of things that would help getting started?
And where I could probably get fiberglass cloth?
Yeah sure, you can buy fiberglass on amazon or ebay, so this is what you need, ( fiberglass chopped strand mat cloth, fiberglass resin,
Bondo body filler, chip paint brush, sandpapers, gloves and 3m paint respirator ) now if you wanna make a front bumper lip side skirts or anything, just watch a lot of different videos to get an idea of how you can start your project, that's my advice
@@chiquitademivida thanks very much appreciate the wisdom.
@@Eclipse_XVX 👍
💪🏾
👍
.🔥🔥🔥🔥
Buen trabajo, cuánto tiempo te tardaste en hacer ese Spoiler delantero, saludos 👍🇲🇽
Muchas Gracias, me tardé mas o menos como en 8 meses porque no lo hacía todos los dias, solo lo estaba haciendo en mis tiempos libres, pero si uno se enfoca muy bien y lo haces todos los dias, el trabajo talvez lo haces en 2 semanas
@@chiquitademivida te quedo muy bien, gracias por responder👍🇲🇽
Para eso estamos amigo👍
Hello men, what was the white thing that you spread on the bottom of the bumper?
It's called gelcoat, use gelcoat only when you make a fiberglass mold of something, like car parts or anything
Wow this is so amazing I got so many great ideas from this. I've been trying to fabricate custom parts but using that mold release agent and gel to make your own is such a better idea. I just need to look more closely at what all materials you used and where do you get them?
The fiberglass, PVA release agent, mold release, and the Q-cell filler, i bought all this at Amazon and ebay and the rest of the stuff i bought them at the local store
@@chiquitademivida okay cool thank you I'm going to try this idea making parts this way. I've tried it several other ways not working too well.
You're welcome 👍
Lol from my experience anyone who talks this much never makes it through it's like evil villains in cartoons. Did you make it?
how long did it take you to complete the project
Like 8 months because i only worked on this project in my free time
Hella clean, how’s it holding up so far?
Very good so far
What's the white material?
It's called " Gelcoat " that's the name of the white stuff that i spread on the bottom of the bumper, i don't know if that's what you're talking about
Сколько времени ты на это потратил бро?
It took me 8 months to complete the project
Ну вот ещё маден ин копут бамперу он сейчас забется грязи
Come lavoro sei stato molto bravo per non sta bene pero niente sull Auto😔
Thank you for your comment
Donde radicas , me gustaria mandar hacer un kit para mi troca
En norte carolina
Yo tambien en wilmington North Carolina
How much would you charge to make one?
Idk, maybe $200 idk yet, probably i will make one in summer to sell it
@@chiquitademivida where are you located
I’m in Cali do you have email or phone
Could you put the products to see the names
Fiberglass Chopped Strand Mat Cloth, Fiberglass Resin and Hardener, WHITE GELCOAT NO WAX with Hardener, PARTALL FILM #10 (PVA) Mold Release Agent, MOLD RELEASE WAX, DING ALL Q-Cell Filler and Bondo Body Filler. These are all the products that i used
سلام
سلام
No haces para vender me gustaría que me hicieras para mi toyota camry se 2016
No es mala idea pero para hacerlo tengu que tener el bumper del carro para tomarle las medidas porque cada carro es diferente
where can i buy
Well, I need to make a copy so i can sell it
I got a set of brand new carbon fiber fenders for your car....
I'm looking for a wide body kit fender flares
😠 ρɾσɱσʂɱ
Waw all you need to know about how not to make a front lip, perhaps some of the money wasted could have been used to replace the bald tyres on the car.
You're right lol, but that's how you learn, you have to spend money and time
Цвет вообще ни в тему
Mucha verga para dejarlo pegado en una paral de parking 👎
Si lo sé mi amigo pero todavia esta en proceso el proyecto
Лютый колхоз
amazing job
Thanks