DIY BUMPER AERO!
ฝัง
- เผยแพร่เมื่อ 13 ต.ค. 2022
- Decided the bumper needed a little bit of love!
Polyurethane foam board
www.ecfibreglasssupplies.co.u...
Instagram @chris.purr
TikTok @chris.purr
Contact me here buildcreateauto@gmail.com - ยานยนต์และพาหนะ
love your builds bro! the boring stuff is still a interesting process and great for people who are learning (like me) :) dont be scared to add it in! it fills the videos nicely and adds some knowledge. keep up the good work!
Thanks man! Glad it helps out in some way.
I try not to ramble on too much 😂
@@BuildCreate for a long time now I've been following Stanceworks projects and what keeps me watching is the rambling and the boring stuff because no one else shows it 😁 I may be weird but listening to the process others take to do things and thier visions is fun to me!
@@ashpritchard1238 man, I love Mikes channel. I also enjoy his rambling 😂. It definitely appeal’s to the nerd in me.
@@BuildCreate same with me! I need the rambling and the boring bits to pick up on, I could watch a 40 min video of this!
Excellent attention to detail. looks so nice!
Cheers dude. All in the details as you well know 😉
I feel like that upper section needs to meet the over fender at the same point (i.e. bumper section needs to flare out at the arch). Otherwise very cool updates so far.
I've enjoyed the longer episode. Your work and ideas are great to see come to life. And it's really good to see more consistent videos out from you. Keep up the good work. 👍
Awesome! I think a lot of people liked it too. Definitely going to try and do more like that dude.
I’ve had a bunch of time off recently, hence more videos going out ☺️
Great technique. Love the swedge line detail!
Thanks man! That’s my favourite part too!
Always a pleasure to see you work.
Very kind of you to say so dude!
Making it look so easy! Keep up the good work!
It didn’t feel easy. That’s for sure 😂
Good work mate keep it up. Love the lengths of the videos. As previous comments.. the boring stuff is great to watch 👍
Thank you dude. I think it’s a decent length, didn’t want to drag it out too much 😂. Glad people love the rambling!
Really enjoying your videos. Basic and informative. Keep up the good work. 👌
Thanks man! Much appreciated!
Very nice,Chris! I love the flow.
Thank you so much dude!
Finnaly a good stuff to watch!
Good stuff and info u make it look alot easier then alot of the diy widebody stuff iv seen. I wana build a kit for my bagged civic ek sedan
Awesome as always💪🏻
Thank you dude!
Looks mega,really inspiring and learning aswell! 😁👏
Thanks dude. Stoked it’s helped you out!
You have proper talent, Chris! Keep up the good work 😊
Thanks dude. You’re too kind!
Really cool update, love your method. Very adaptable... This design leaves a little room for a cheeky diffuser if you wanted to. Cant remember if youve used ACL or alumalite before but take a look into it, some sign shops will sell it to you
Thanks man! Yeah, anything is possible!
I remember that stuff, pretty cheap too from what I remember?
Another great result there, they're gonna look great, well done 🍻
Thank you dude! I’m really stoked with how it came out. Makes such a big difference to the flow of the car.
Very nice bro. This is what I call, imagination and skill clubed together in one pacakage, at its peak. Love from Pakistan❤❤❤
Great build, I've been following since the beginning. Best wishes from Peru
Awesome! Thanks dude, much appreciated!
Perfect 👌🏻
Thanks man!
Great work! Your exhaust need some nice exhausttips. Would look mutch better.👌
Thanks dude. Still not sure what to go with exhaust tip wise…..it’ll probably be something very subtle.
Thanks man you’ve kinda inspired me to do work with carbon fiber on car used to work in marine restoration fibreglass vac bagging etc and worked as autobody painter for few years never thought to combine two! Not looking for views or competition did a few things for drag civic cf headlight plugs gauge bumper and more on my channel or Dunlop carbon fiber tell me what ya think more to come did my civic roof and fenders bumper👍thanks again for inspiration 🙏cheers 🍻
Man, that’s so awesome! I’ll definitely check it out dude.
Thanks for the support!
Very awesome. You make this look easy.going to try this on my ef
Thanks dude. Yeah, definitely try it! It’s easier than you think!
People like you really help the car community. Not the tens of thousands builds. But the normal joe. Thank you brother and keep it uo
@@lexeg1 Thank you so much dude. Really nice of you to say so! All the best with the project!
Yeahhhh por fin máster.
Saludos cordiales
Looking awesome! Thanks for the tutorial on doing fiberglass panels!
Thanks dude! I think people enjoyed the slightly more in-depth video.
@@BuildCreate definitely. I gave your name to some Hollywood types. So if you get contact they are legit.
Email if you want more info.
@@lasersterling Thats so kind of you to do that dude!
@@lasersterling what’s your email dude?
Love this, how thick is the poly foam board you're using?
Cheers dude. 12mm is the thinnest you can buy.
I’ve sanded down the piece to about 5mm to make it conform to the shapes I wanted.
I find the whole process interesting and it looks great
Will you be doing a diffuser or will the mufflers be in the way?
👍😊👍
Glad you liked it dude! I may do in the future, got to have a proper think about it though.
Mate your so talented. This shits so cool. Hows the job front going? Didn't you get made redundant from that body shop? Any updates?
Thank you so much dude!
Back working in the industry I was in before the body shop. Nothing interesting at all and not car related.
The dream for me is to have my own aero company, start small with something like this for a more popular car you know?
@@BuildCreate you'll get there mate 😁. Just need it to all align right
Ah, spats. My current car had some really cheap, plastic spats added by the previous owner (tek screwed onto the bumper). I took them off at the same time that I leveled the rear suspension with the front. For some reason they had lowered the front by about 3" and left the rear at stock height. 🤯They also had the coilovers set as hard as they could go, so it rode like crap. 🙄
That looks amazing though! So nice.
Oh man, that sounds like a nightmare!!
Definitely no tek screws here 😂
Awesome work. Where do you get your foam from. Do you have a link. Looking forward to seeing more.
Thanks man! Just added a link in the description!
Awesome thanks. Building a front bumper in the same sort of fashion I.e bolt on to factory front for me Leon. Nice to see ppl actually make things.
@@Mandk1108 My pleasure dude! Sounds awesome, you’ll love working with this stuff. Total game changer.
@@BuildCreate I’ve done body kits 20 years ago and been ankle deep in fibreglass and filler so this looks like it takes a lot of heavy work out of it. Following on insta now also.
how much resin did you need for the corner addition s?
I honestly can’t remember dude 😂. At a guess, less than a litre!
👍🏾👍🏾👍🏾
NUUUUUUUUU! BURNG MUR CURTURNT!!!
Hey buddy
Loving how this is coming along we do a very similar thing @kc customs Portsmouth on Facebook, give us a message when you get a min !!
Cheers
Clint
What wheels are those? They're rad.
The ones currently on the car are rota GTR’ds
@@BuildCreate nice. I've been looking into wheels for my 08 impreza hatch since I put coilovers on it and am putting an exhaust on it as well lol.
You can see why only people with the skills do this, it's such a time sink, the results are so good though! @chris.purr killing it, slowly :)
Man, it really does take a whole bunch of time to get these things right.
Unfortunately in the UK not alot of people are willing to pay for it 🥴
@@BuildCreate Yeah, you need to go full Liberty Walk or Rocket Bunny if you are going to make any cash from body kits.