How does cutting it not open the seal? Maybe it's because I was laminating a card and not a regular paper, but cutting close to the edge seemed to open the seal on it. But maybe I'm just misunderstanding how it works.
Some lamination will open when you cut close to the seal, this one seemed to stick. If you need to do a lot of cutting I recommend a sticky laminate as opposed to a heat laminate. Xyron sells sticky laminate and it works great, I have this one: amzn.to/342k6o6
Hi. I have just started laminating for my 2 and 4 years old and cut pictures in to flash cards after laminating them, however the edges are very sharp after I cut them, any tip on how I could make it smooth. Thanks
Look for laminating sheets that open from the side. For when you are doing a lot of laminating, like for a whole theme’s flashcards, it cuts the laminating time in half.
hi there I have a Mars4 laminating machine and I used it to laminate about 15 sheets over a given period of time. However the machine is not turning green. and stays on red. what could be the problem. Its not heating up. Should I get cleaning sheets to clean it.
![[Live] ศึกมหึมันส์มวยไทยสังเวียนเดือด เวทีมวยชั่วคราวสวนสยาม | จันทร์ 30 กันยายน 2567](http://i.ytimg.com/vi/pM1k6f7JXUc/mqdefault.jpg)
![ลองสั่งของจากแอพ temu ถูกจริงหรอ?? [โกงไหมครับ ep.88 ] | DOM](http://i.ytimg.com/vi/RTcZSQTiDZw/mqdefault.jpg)
How does cutting it not open the seal? Maybe it's because I was laminating a card and not a regular paper, but cutting close to the edge seemed to open the seal on it. But maybe I'm just misunderstanding how it works.
Some lamination will open when you cut close to the seal, this one seemed to stick. If you need to do a lot of cutting I recommend a sticky laminate as opposed to a heat laminate. Xyron sells sticky laminate and it works great, I have this one: amzn.to/342k6o6
I’ve read that happens when the paper is pretty thick so it makes an air gap around the edges.
As a perfectionist the cutting part gave me anxiety! Anyway, good tip for the 2 in 1!
Hi. I have just started laminating for my 2 and 4 years old and cut pictures in to flash cards after laminating them, however the edges are very sharp after I cut them, any tip on how I could make it smooth. Thanks
Corner rounder punch - search on Amazon. Hope that helps
There is a store on eBay that sells 100 for 11.00. They are great
man you speak way too fast,whats the hurry
Believe it or not I had never thought of laminating two sheets back to back! That's going to save me quite a bit, thank you!
You speak too fast, makes it difficult to understand what you are saying!
Linda E. Brown slow it down for yourself for the rest of us it’s fine
Can fabric be put through the laminator because I hate that iron on stuff! It cracks and is crinkling!
Thanks for the video Erica..Can you tiell me what kind of velcro type fasteners do you use for your letter of the week..Thanks in advance
Hannah, it's just a Fiskars small paper trimmer :)
Erica Arndt
@sha-ToniaSwint I use small round dots on a roll that we found at Walmart in the craft/sewing isle.
Used your trick to double laminate some cards I made. Thanks for the help!
What paper trimmer is that? I need a small one for my tiny homeschool room :)
I'm super late, but it looks like Fiskars, and it's very popular - you can find it in most stores (Target, Walmart, Michaels....)
Look for laminating sheets that open from the side. For when you are doing a lot of laminating, like for a whole theme’s flashcards, it cuts the laminating time in half.
Hi, how do you smoothen the sharp edges after cutting the laminated paper?
I don’t really bother doing that I suppose you could round the corners in square pieces but I don’t really worry about it.
Tried ta buy your laminator through your TH-cam channel, but it’s not easy to find if there is a video on a smart phone. Ty with your suggestions
Hi, sorry this video is very old, so may not be available anymore.
Laminating one side of the paper. Best tip ever. Thanks so much!!!
You saved my life. Thank you
If I cut the edge of my laminated paper will the lamination start to peel?
It depends, some do and some don't. On heat laminators it may pull up, I didn't have that problem with this one.
I have a laminator that does both hot and cold. If I were tp laminate on the cold setting, would the cut edges of our puzzles and cards come apart?
I did this double sided but mine opened up
How to make this kind of worksheet?
Works great for small projects
love your videos !!!
Love that tip! Thanks :). (Homeschoolingmuslimah)
Love the tips
She said milliliter lol
That is an excellent point if you are wall hanging something you only really need the front done. Smart!
Thank you
Love
Question: If I paste items onto cardstock and then laminate, will the glue melt and make the lettering bleed???
Hmm, not sure about that I haven't tried running something through that I've glued. I guess it would be worth a try :)
So far it didn't happen to me.. Used an ink cartridge printer not the laser printer.. and a glue stick..
Love mavalus tape too!!! :)
thanks for your video
Thank you so much😃
can anyone tell me how to straighten their laminated paper after they laminate their paper one sided? It is annoying the heck outta me?
hi there I have a Mars4 laminating machine and I used it to laminate about 15 sheets over a given period of time. However the machine is not turning green. and stays on red. what could be the problem. Its not heating up. Should I get cleaning sheets to clean it.
HI Mandy, I'm not sure as I don't have that brand. I would probably contact the vendor and see if they have trouble shooting tips online.
Such a good tip saving laminating pouches
I am strongly considering homeschooling and I am so glad I found your channel & i love your blog website!
Thanks for the tip of 2 for 1 smart👍 and you have beautiful hair 👍
Talk slowly please