Some advice it is imperative that you find the proper length knurled starter bolts and it is imperative that you torque them to spec 25 to 35 ft lbs adding nuts for bolt spacers will cause the starter to walk causing it to not engage properly it is also very important that you use the shims to get the correct gap between the starter teeth and the teeth on the flex plate if you do not follow these procedures it will either ruin the starter gear or ruin the the teeth on the flex plate trust me my 350 ate 4 starters and a flex plate before I learned this lesson.
That’s what I’m saying... American parts store? Lol pipe wrench... I’ve been a plumber 30yrs and I do not have a pipe wrench in my tool box that looks like a ratchet!!... lmao
ANY GOOD MECHANIC IN THE LOS ANGELES AREA I NEED TO DO THIS ON MY 1979 EL CAMINO ...MY MECHANIC CHANGE FLYWHEEL AND STARTER AND STILL DOES THE SAME NOISE WHEN U CRANK IT SOUNDS NASTY......SOMEONE PLEASE HELP
welp, i was just looking for where to connect the wires to but, okay.
Do you remember how to connect the wires?
What about the shims and checking the tolerance. You do not mention the problem of grinding and adding the proper shims.
Some advice it is imperative that you find the proper length knurled starter bolts and it is imperative that you torque them to spec 25 to 35 ft lbs adding nuts for bolt spacers will cause the starter to walk causing it to not engage properly it is also very important that you use the shims to get the correct gap between the starter teeth and the teeth on the flex plate if you do not follow these procedures it will either ruin the starter gear or ruin the the teeth on the flex plate trust me my 350 ate 4 starters and a flex plate before I learned this lesson.
Nice positive cable, with a few burns...
Question : no shim add ?
Elon Musk installing a starter. You dont see that every day....
where are your shims dude? and the wrench is not called a pipe wrench.
Do you really need shims?
U saved me bro thanks
What's the part number on starter brace?
Any video of wireing hook up? Had mine off for a while and forgot were wires go,
Same looking for a video no one had one ?
Me too
did u get it figured out if not i can walk u through it
@@fukjoebiden6122 i just swapp harness i notice some imperfections on it so went with another harness from the junkyard
Do need to lubricate the starter before installing.
Thanks
Yes, pour acid in it to lube it.
I need to know what wires go where! I’m so confused it won’t even try to crank
Battery
Well maybe you should research that before installing it.....
@@SOLDOZER slapped it with a stick of bologna and the bitch cranked wouldn’t you know it
It is a good idea to wear safety glasses when working on things. I once got a hot piece of slag in my eye. It required medical attention.
Pipe wrench?
That’s what I’m saying... American parts store? Lol pipe wrench... I’ve been a plumber 30yrs and I do not have a pipe wrench in my tool box that looks like a ratchet!!... lmao
He's in Europe. They dont exactly have an Auto Zone on every corner.
ANY GOOD MECHANIC IN THE LOS ANGELES AREA I NEED TO DO THIS ON MY 1979 EL CAMINO ...MY MECHANIC CHANGE FLYWHEEL AND STARTER AND STILL DOES THE SAME NOISE WHEN U CRANK IT SOUNDS NASTY......SOMEONE PLEASE HELP
You need yours shimed.
What is that sensor right above the starter ???
Is that knock sensor or temp sensor
What? Why?
had me till he cut the video
How many teeth ? What if the new starter just spins?doesn't engage?
How many teeth? What if it's a 1977 350?
Was that Elon musk?👀
You need too have a microphone closer, can't hear your rambling half the time
You left one wire hanging.
whare are the shims canadian