How to Replace Front Strut 2009-2015 Toyota Prius

Buy Now!
New Strut & Spring Assembly from 1AAuto.com 1aau.to/ia/1AST...
TRQ Struts are made to fit your vehicle exactly, just like the original part. Struts can wear out as early as 50,000 miles. You should inspect them regularly for leaks or wear. Save time, money, and hassle by replacing an entire strut assembly. This video shows you how to install new reliable TRQ struts in your 2009-2015 Toyota Prius.
This process should be similar on the following vehicles:
2010 Toyota Prius
2011 Toyota Prius
2012 Toyota Prius
2013 Toyota Prius
2014 Toyota Prius
2015 Toyota Prius
Tools you will need:
• 22mm Wrench
• 10mm Socket 1aau.to/od/1AXA...
• 12mm Socket 1aau.to/od/1AXA...
• 14mm Socket 1aau.to/od/1AXA...
• 17mm Socket 1aau.to/od/1AXA...
• 21mm Socket 1aau.to/od/1AXA...
• 22mm Socket 1aau.to/oa/1AXA...
• Trim Tool Set 1aau.to/oc/1AXX...
• 1/2 Inch Air Impact Gun 1aau.to/od/1AXA...
• 3/8 Inch Air Impact Gun
• Ratchet 1aau.to/oc/1AXA...
• Torque Wrench 1aau.to/od/1AXA...
Subscribe: / @trq
Check out our playlist:
2010-2015 Toyota Prius: • 2010-2015 Toyota Prius
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@Daniel-ey2gf]

My 2010 prius struts just went bad and there's a noticeable thumping noise during maneuvers to let you know. This video is very helpful for doing the job at home. While the wiper system is out of the way, it's a perfect time to replace the spark plugs while doing the struts.

[@mikemurphy5655]

very good video. straight and to the point and not too much talking. Thank You

[@09JSanchez]

The bolts holding the strut were reinstalled from the opposite side than they were removed. Probably not a problem, but there are some cases where it matters. I prefer to put everything back the way it was originally.
Also, great video overall, thanks for sharing the instructions.

[@floydk2813]

After you install the Struts, do you need to get a wheel alignment? Great Vid BTW.

[@brk4684]

great video, very precise and detailed thank you! Question please, my 2013 Prius has 165,000 miles, how long do the front struts and rear shocks last on avarage on these models? Thank youa gain!

[@mark52111]

Very good video. Thanks for sharing. One comment: Regarding video title, I believe the gen 3 Prius is 2010-2015. Model year 2009 is part of gen 2.

[@nicholasallen2639]

I haven't done it yet but do you think putting some painters tape down to mark then wiper position would be a good idea ?

[@bluegrip3007]

Please make one about the 2016-2023 models

[@gwinbeer]

177ft lb. I checked the repair manual - yup, that's affirmative. Guess it's time to buy the 3/4" torque wrench!

[@tarzanoftheapes81]

Nicely done. Maybe check the comments occasionally and respond appropriately. Thank you for a great share.

[@lakings505]

Thanks for showing us how its done !

[@mcemtpockets1775]

Hey yall. I thought i could do this my self. The confidence you guys had given me is quickly dwindling. I have a 2015 Prius C. My front struts are not the same as urs. I do NOT have three bolts for mount. I assume i have one large bolt in the middle of the strut at the top of the car mount... I think. I got everything done except pulling the strut off. I do not know how to remove the shock from the top mount. Do I twist or pry cap off? Pls help as of now I'm stuck and carless?

[@mpatt32]

Does it matter if the factory bolts are 14mm and the new struts bolts are 15mm, I just hope they fit in the hole after I pull

[@Biophyswiz]

Why do you push in on the knuckle??

[@yaosun9431]

Should have done it with my spark plug... Now I am returning the parts

[@meljane8339]

I am reviewing the Service manual as I watch your variation (because english-to-english translations can be more confusing than multilingual, at times). ...

[@ickes2255]

In every one of this guys videos he over tightens every bolt with his impact gun then pretends to torque them to spec. So does every mechanic in every shop. its why even lug nuts are impossible to remove after you let a shop touch your car... but at least he is telling us the correct torque.
Other than that I appreciate the content.

[@fredfisherii9043]

Wow that was amazingly helpful!

[@ewetuber186000]

Excellent video

[@neilspringer5530]

I think that my struts are bad on my 2014 pruis does it make a groaning sound 🤔 my mechanic is not sure

[@trappdaddy6920]

Do you guys have any videos on 2007 yaris Toyota abs and brake light are on 😢

[@pikpok7728]

hey mate just subcribed, do you have any videos on pinion gear/steering rack replacement for prius 2010?

[@TRQ]

+@pikpok7728 We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-TRQ

[@johnk6528]

Great Video!

[@MrFitness94]

3:35 I’m dead

[@tylertran93nsx]

How do you know when to replace struts on a Prius?

[@Fdeghhhhhhhjjjk]

Very nice excellent thanks to help

[@edwinbab705]

How can i.loosen bolts without air power tools

[@mariadelrosariorodriguez]

I have toyota prirus hybrid when I need to change it I have around 80.000 miles

[@mcemtpockets1775]

I hope someone reply cause i purcahsed these for ur site

[@user-in2wx8mg1b]

Good

[@edwinbab705]

How michbpower the power tool needs open ot

[@ChowTY42]

Lifesaver

[@mcemtpockets1775]

The struts are diff in a 2015 Prius C. Im a sooooo lost!

[@printerlozano]

Strut replacement

[@jasonbroscious2715]

One side was 177 foot pounds and the other 55? Speaking error or what?

[@jasonbroscious2715]

duh..I figured it out

[@kurtmaxberry7025]

Over torqued for sure

[@v0rt3x86]

Got a spec sheet?