Top 40 Best BLACK 3D Print with Satisfying Timelapse | Recap 2023
ฝัง
- เผยแพร่เมื่อ 24 ธ.ค. 2023
- On this video we compilated a Top 40 Best BLACK 3D Print with Satisfying Timelapses of Year.
If you enjoyed this video, please consider subscribing for more content!
Contact for partnerships:
✉️ mrkennedy3d@gmail.com
#3dprinting #timelapse #compilation - วิทยาศาสตร์และเทคโนโลยี
All files used in this video:
Nether Portal :
www.thingiverse.com/thing:6165577
Darth Vader Low Poly netfabbed_fixed by ramai
www.thingiverse.com/thing:1720407
Drogon Egg ( Game of thrones ) by ZekeAsakura on Thingiverse:
www.thingiverse.com/thing:3018202
Enderman Minecraft by f_d_Pastorius :
www.thingiverse.com/thing:2702780
Tire Pen Holder by caseys_graphics on Thingiverse:
www.thingiverse.com/thing:6301248
Working Cannon by makkuro on Thingiverse:
www.thingiverse.com/thing:5421331
PS4 Dualshock 4 Controller Holder by Metzhara on Thingiverse:
www.thingiverse.com/thing:3082825
Bottle Ant Roll by WDonders:
www.printables.com/model/266438-bottle-anti-roll-stops-interconnectable
rick sanchez silhouette remix by seckseck:
www.thingiverse.com/thing:5553964
Star Wars Tablet Stand - Rebel by b1sh0p on Thingiverse:
www.thingiverse.com/thing:1371649
Cat key hook by aarruti on Thingiverse:
www.thingiverse.com/thing:5904534
Rectangular trash can ( Vase Mode ) by Omdoyas on Thingiverse:
www.thingiverse.com/thing:4725064
Octopus Stand Version Three by notcolinforreal on Thingiverse:
www.thingiverse.com/thing:607518
Articulated Tarantula by owtcydur on Thingiverse:
www.thingiverse.com/thing:1760063
Printable Interlocking Puzzle #1 by richgain on Thingiverse:
www.thingiverse.com/thing:31639
Dead Guy Doorstop Resurrected by oregongeek on Thingiverse:
www.thingiverse.com/thing:5602477
bookmark game of thrones (GOT) by campalans on Thingiverse:
www.thingiverse.com/thing:3353026
RGB LED Strip Remote Control Holder by Tokyo_Bird on Thingiverse:
www.thingiverse.com/thing:5385323
SHARKZ... Fun Multipurpose Clips / Holders / Pegs with moving jaws that bite! by muzz64 on Thingiverse:
www.thingiverse.com/thing:910216
NASA 34M Antenna by chzhed on Thingiverse:
www.thingiverse.com/thing:469286
PS4 Game Holder by Bmb74 on Thingiverse:
www.thingiverse.com/thing:2851804
Toilet Roll Sisyphus by SerenityRanch on Thingiverse:
www.thingiverse.com/thing:6287835
Minecraft Spider by Flounder1664 on Thingiverse:
www.thingiverse.com/thing:683706
Gaming headset holder wall mounted by Sparksuk on Thingiverse:
www.thingiverse.com/thing:5874574
Game Controller Wall Mount Stand Holder for XBOX ONE with screw by Watin_ on Thingiverse:
www.thingiverse.com/thing:5185043
Amazon FireTV Stick Remote Control Holder by jweaver:
www.thingiverse.com/thing:1158994
Kitchen utensil holder - Voronoi by ilmiticoggg on Thingiverse:
www.thingiverse.com/thing:4802127
Voronoi vase by Area3d on Thingiverse:
www.thingiverse.com/thing:4800105
Trooper toothpick DISPENSER by exploradoresdelfuturo on Thingiverse:
www.thingiverse.com/thing:6155712
Floating cube planter in the ring (suits airplants) by KENKEN0851 on Thingiverse:
www.thingiverse.com/thing:6229829
Halloween Cauldrons by tone001 on Thingiverse:
www.thingiverse.com/thing:2593806
Basic Knife Holder/block/Stand by Nightdre4mer on Thingiverse:
www.thingiverse.com/thing:4472058
Celtic tree book support, bookend by McKwad on Thingiverse:
www.thingiverse.com/thing:4838416
Chakra Blade Asuma by RyutenStudio
www.thingiverse.com/thing:5136286
Sasuke Uchiha Eternal Mangekyou Sharingan Keychain by Edronz on Thingiverse:
www.thingiverse.com/thing:4891514
Kitchen Utensils Drying Basket by hyunji on Thingiverse:
www.thingiverse.com/thing:4380270
Laptop stand - UPDATED by RODEEY on Thingiverse:
www.thingiverse.com/thing:4646962
Knurled Twist Container with larger inner space by SEA17 on Thingiverse:
www.thingiverse.com/thing:4366929
Glock Console Holster by Mframe on Thingiverse:
www.thingiverse.com/thing:2469412
Bag Holder - Shopping Handle by ivanseidel on Thingiverse:
www.thingiverse.com/thing:26767
Modern Glasses Stand by Kiesling on Thingiverse:
www.thingiverse.com/thing:3655764
Hello, i think you messed with the set up print quality seems horrible sometimes
You are right! This video is a compilation of parts from last year, we were having a lot of difficulties with configuration, nowadays we have a new printer and we also calibrated and adjusted our Ender, our current prints are already much better, we try to improve a little more every day 🙏 🙌🏻 Thanks for the comment!!
Love the video, I had to make an enclosure when I was printing with abs, it is finicky when it comes to temperature.
I know how it is, we are procrastinating making a structure for a printer when we use ABS, it is a challenge sometimes, the cracks are cruel 😅
Thanks for your comment, have a happy new year!! 🎉
Time for new music, all channels using the same thing 😂
We really need to look for new songs haha
NCS* has a LOT of music u can use, instead of the same 2 instrumentals.... MIKAN uses lots of music from there, BTW
"I love your videos. I wanted to ask, what camera do you use to create those spectacular timelapses? I use a Logitech 920, but mine don't turn out like that. In fact, sometimes the pieces I'm printing get damaged because I haven't achieved that calibration for the nozzle to move to the back right and take the photo without harming the piece. If you could share your setup, it would be a great help. 🙏"
Thanks! We use a Beagle V2, in fact we are testing according to the parts, you may have noticed that in some timelapses the nozzle is moving, we change the timelapse mode according to the part, try testing other modes on small test parts and vary the calibration until you know the best setting according to each type of filament and timelapse mode 😁 Happy holidays, have a happy New Year!!!
new sub well deserved.
Will you Make these series of videos with all colors?
Thank you! 😄🖤
Yes, we intend to do it with all the colors we have so far 🙌🏻
@@mrkennedy3d thanks to you. Great job with these videos...
i buy few minutes ago a bambu a1 mini because i m a newbie of this world.
@@davidevelludini6120 Wow this is amazing, always good to have new people in this area, good luck! You will adapt quickly, I think the secret is to do it very often to learn from your mistakes (there will be many, stay calm and don't get frustrated, this is normal 😅), maybe making the videos for youtube was what encouraged us producing lots of prints, think about recording and sharing, people give us lots of tips here...
Happy new year to you and your family 😁🙏🏻🎉
Links for files?
Hey! We pin the links in the comments, have a nice day 😁🙏
esse kit de cozinha é show de bola, hein!
As impressões com uso prático são as minhas preferidas! 😅
Obrigado pelo comentario 🖤🙏🏻
nice!
Thank you friend! 😅🖤
What brand and model is the printer? please
In this video we use an Ender 3 v2 😊
Awesome vid is that an ender 3 printer (im dumb)
Not dumb at all! You're right, it's an Ender 3 V2, there are many printer models, we don't know them all 😅
But he said he is dumb
Book mark STL ❤
sorry for slowness... 😅
bookmark game of thrones (GOT) by campalans on Thingiverse: www.thingiverse.com/thing:3353026
thank you❤@@mrkennedy3d
I don't think you should rewind
Sorry, what do you say about the reverse in the video? If so, we really stop doing it 😂 Thanks for the comment 🙏🏻
printing with abs kinda stinks but abs likes a room temp of the temp as the hot end you can find enclosures pretty cheep amazon to help with printing abs
Abs emits toxic fumes. Are you crazy? For ABS you need exhaust. Some special carbon air filters may handle the toxic styrene, but i would not trust it.
Yes, we thought about building a box for our 3v2 ender, but in our case, we left the printer in a closed room, which we used exclusively for printing.
It's not as good as having your own structure, but it helps a lot both to keep the temperature a little more stable and to isolate the horrible smell that ABS has. 🤣😅
Thank for your comment friend! 🖤
Where are the file to print I would like the shark clips
I'll make a list of all SLTs and send it to you here in the comments as soon as I post it 😁
@@mrkennedy3di wait 2😂😂😂😂
sorry for the slowness... 😅
SHARKZ... Fun Multipurpose Clips / Holders / Pegs with moving jaws that bite! by muzz64 on Thingiverse: www.thingiverse.com/thing:910216
@@uliz17 SHARKZ... Fun Multipurpose Clips / Holders / Pegs with moving jaws that bite! by muzz64 on Thingiverse: www.thingiverse.com/thing:910216
sorry... 😅😅
@@mrkennedy3d thanks
Voce é brasileira né?
Somos brasileiros sim 😊
MrKennedy is in reallity MsKennedy
We are actually a couple 😁 Mr. and Ms. Kennedy hahaha
Why no bambulab printer. Would finish the prints much faster
Hey! Here in our country printers have a much higher value, when we entered the world of 3D printing we did some research and opted for the Ender, until now we only have this one, our dream is to have more models and faster ones for sure! Thank you for your suggestion 🙏🏻
So much brim
Hey!! Now we bought the glue so we will try to use less brim 😁
@@mrkennedy3d I prefer textured plates, no glue needed, and I use brim only for very high or very small prints
Nice print quality🤣
Thanks! 🙏🏻
Can a 3D Printer make anything useful or is it only useless trinkets? I mean, I am all for a great looking benchy, but what's the 'real life' application?
For sure! 3D printing has applications in many sectors such as engineering and medicine! Understanding 3D modeling, physics and having a printer you are capable of anything 😂 Our goal with the channel is entertainment and thus promoting the world of 3D printing, but the possibilities are endless 😊🙏🏻
I often print something for my hobbies, e.g. parts for RC-models, holder for watch-movements or - at least - if plastic-parts in the household breaks, I replace it by a self printed part. In the past I did the same with wood, metal and a lot of different tools - now I need a CAD-program, filament and a printer - I love it 😍
@@renewagner5679 A tool for creative problem solving: Something about bringing a 2D drawing to 3D and printing a real tangible object.
need darth vader stl :)
Here!! 😁
Darth Vader Low Poly netfabbed_fixed by ramai
www.thingiverse.com/thing:1720407
Где тайм коды?где файлы?
Hey! We pin the links in the comments, have a nice day 😁🙏
nether portal stl pleeeeeeeeeeeeease
it's for now! 😅😎
www.thingiverse.com/thing:6165577
Use 3d glue
We will test 😊