Warning to all who want to print the wine bottle holder at 12:40 I have not personally printed this, however the liquid inside has been balance for it to balance the way that it does. Also the weight of the bottle will cause the print to slowly deform so eventually when you aren't paying attention, it will break and the bottle will fall!
You probably fix it but you're prints are stringing and if you don't fix is ganna cause some problems down the line trust be it happen to me its a easy Google fix away.
None of the Ender printers I've seen are good enough to print such tight Torrance's to do any working parts? Even after tons of tweaking and tuning. You normally only get that from a Core XY Klipper Printer! I had a few Bed slinger printers and none print such perfect working models due to the lack of detail. Only now I have a klipper fast Core XY enclosed printer do I do perfect working prints.
Sorry to say this, but man you have to be bad at calibrating your printer even slightly. With an anet a8 i would agree, but everything from the first cr10 to the even better ender-3 and several clones of them i had 0 problems getting something like any of the shown things working in pla. With tweaking even harder models and materials isn't too hard to achieve. If you don't buy a good core xy they are much harder to use than a cheap ender-3 style one
You can get good tolerances on most printers these days, especially with input shaping. You just go a bit slower on bed slingers to get the same quality.
Let's spend hours printing an inferior, more expensive item to something you can already buy. Lol . Oh and let's rip off someone else's design and try to profit off it.
The card shuffler is awesome
I also found throwing the prints on the table makes them go together ans work way better. The farther you throw them the better it is!
I like it when 15:29 they spun the hand in the opposite direction that was cool
Impressive
şaraptan belli ettin ülkeyi, ellerine sağlık çok güzel projeler
Türk değil ki
Warning to all who want to print the wine bottle holder at 12:40
I have not personally printed this, however the liquid inside has been balance for it to balance the way that it does. Also the weight of the bottle will cause the print to slowly deform so eventually when you aren't paying attention, it will break and the bottle will fall!
Try print in ABS.
Ok but how about we wait until after we solder everything together to put the batteries in?
I need a lot of these 06:19 😁😁
A great collection of prints and love the editing. Nice work
What printer are you using?😊
Nvm seen it. But there was no link to the rotating display
Its a Creality Ender-3 S1
this pair of headphones are the most and only funny in this video
What filament are you using?
I have dino pencilcase 😂😂❤❤
Which filament are you using for the green and blue parts of the shuffler?
Green and blue filaments
But probably pla or abs
Rotating stl?
perfect
What are you using for adhesion?
Indeed. Some of that adhesion was insane. Well done!
Prob glue
Hello, for the Playing Card Shuffler v3 what size did you take for the uno cards?
Thanks in advance.
Glue stick with PEI is a bit overkill
This is 100% warp free
Alles super!
Wo kann ich stl Datei für Drehteller finden?
Vielen Dank!
Alle Links sind in der Beschreibung
@@highfish2823 Hallo, da sind alle Modelle außer Drehteller!!!
4:08 dude i can clearly see the debris falling out from the collector 😂😂😂
Rotating stand deets?
What is this shiny plate thing on your metal priting bed ?
That's a removable metal print sheet, not sure if it's a PEI coated one or not.
Idk, at one ppint it looked like he might have had an adhesive sticker on top of the PEI sheet@mitchellquinn
Trouver stl LOL merci
Stl please
In the video description.
Cool 😎
You probably fix it but you're prints are stringing and if you don't fix is ganna cause some problems down the line trust be it happen to me its a easy Google fix away.
👏🏻👏🏻❤
None of the Ender printers I've seen are good enough to print such tight Torrance's to do any working parts? Even after tons of tweaking and tuning.
You normally only get that from a Core XY Klipper Printer!
I had a few Bed slinger printers and none print such perfect working models due to the lack of detail. Only now I have a klipper fast Core XY enclosed printer do I do perfect working prints.
Sorry to say this, but man you have to be bad at calibrating your printer even slightly. With an anet a8 i would agree, but everything from the first cr10 to the even better ender-3 and several clones of them i had 0 problems getting something like any of the shown things working in pla. With tweaking even harder models and materials isn't too hard to achieve.
If you don't buy a good core xy they are much harder to use than a cheap ender-3 style one
If my ender 3 pro printed as poorly as the one in this video does, I'd be pissed. Dude, calibrate your printer!
You can get good tolerances on most printers these days, especially with input shaping. You just go a bit slower on bed slingers to get the same quality.
Another way to produce plastic waste.
Sorry, but the Prints are looking horrible. You have to tune your Printer and Profiles.
I couldn’t disagree more
Seems irrelevant to the content of the video.
Prints looked fine to me
I mean hey at least his prints aren’t warping always like mine 😭
Obviously someone doesn't know the difference between constructive critcism and being a c***
Why, who wants this??
Me
If you’re still asking or keeping a list, me too.
Me
Let's spend hours printing an inferior, more expensive item to something you can already buy. Lol . Oh and let's rip off someone else's design and try to profit off it.
Thumbs DOWN
Most of these would be cheap to print and would work just fine.
@@logicalfundy 🤣🤣🤣🤣
@@TC-dk6do Cable organizer is $0.75 in filament, $0.38 if you go with cheap filament. Definitely breaking the bank printing these things 🤣.
Someone mad cause they are too poor to buy a printer.
hi,chef , loading stand ! stl STL Files stand
ih
Cool 😎