I agree with m! Great video and the clown held up great I was quite impressed you've asked the hell out of it and I was surprised that 35 turn stock Style
Pretty impressive honestly. I have been really curious about this exact truck for more of a trail runner/ light crawling. It will be perfect for my axe system that I have been trying to find a home for! Great review!
AS I've said, trx4 is a tired & wore out design. THIS is exactly WHY! A slight few improvements, as in THIS version, & it could have been better. Like the 'clone'🤷♂️
TRX Cease and Desist letters inbound! Look out! 😂😂😂 Rad vid. As always, thx for all the content. 👊🏼 That much speed from a 35t is a bit suspect - no telling what that motor is 😂🤷🏼♂️.
Sorry buddy hit the wrong button but anyways that 35 turn crawler motor with a non replaceable in Bell those rushes overheat so easily and you were running the piss out of it! Great clone from the dollar thanks for the video
This thing is awesome, Muchos Gracias for the find I will be adding this to my collection. I wound up having a spar 2300 Fusion pro and have been trying to figure out what to use it for.
That was cool, can't wait to see it with the Brushless setup installed. If I had Traxxas products already where I could use spare parts from them I would have to try this just to aggravate the Traxxas fanboi's 🤣🤣🤣 Awesome video as always 👍🏼
I ordered one knowing that they'll probably disappear quickly due to legal action. Looks like you set yours up with the same peripherals I plan to. Got plenty sitting around waiting for a home. Great video!
I needed a shorter wheel base(275mm) for a body I've had for Awhile. Found one, came assembled with Everything except esc and body mounts. Here to find out it Is clone of scx10ii raw builders kit v2 but with painted rails and anodized shocks. Hundred$cheaper.😊 Finally Something works out in my favor.
Personally, I'd throw some brass diff covers, brass wheel weights, and heavier wheels on it and move the battery up front. And maybe some hex extensions. Bias everything low to the ground and up front.
Be curious to know if the trans is still plastic gears (that's how they started out) Been running a set of the axles for a year and they're still tip top. Way cheaper than the "T" who shall not be named and fine for casual use
A comment in the introduction video talked about how theirs broke down in two runs. I was hoping that your test would be pretty thorough to make sure we would see any weaknesses. The fact that the video opens with the truck in the air tells me were about to find out for sure.
If it holds upmtomthat as a crawler it should be quite durable!! Lololol!!! Everyone should clone them for going after the little guys....they have been charging how much for that designed for freaking ever!!
Heard you mention that on the live stream. I've had one for nearly a year now. Have had 2 problems that happened to me a lot. Broken plastic ball ends on the steering link. I use longer wheel base and stretch the rear locking cable. It's a pretty sweet chassis for a "clone". Mine is pretty heavy.
hopefully it dies a slow painful death and they go bankrupt..can't stand thieves who lack the originality or talent to actually come up with something of their own so they ride on the backs of others like some sort of leech......🙄
Seems durable enough that you could reasonably buy this chassis for a basher/mud truck. We know fast crawler dont really make the best crawl rigs. So you could buy this cheap throw a 13.5 and some beefy tires and rip it to your heart's content because it's not your $1,000 comp rig.
Between this video and the other one, you couldn't have reviewed this thing any better. Great job.
I agree with m! Great video and the clown held up great I was quite impressed you've asked the hell out of it and I was surprised that 35 turn stock Style
Pretty impressive honestly. I have been really curious about this exact truck for more of a trail runner/ light crawling. It will be perfect for my axe system that I have been trying to find a home for! Great review!
Sweet thanks for the review I want one of these That's awesome Make a great mud truck
Now test also the Austar 6x6!
Better than a trx4? YES!
AS I've said, trx4 is a tired & wore out design. THIS is exactly WHY! A slight few improvements, as in THIS version, & it could have been better. Like the 'clone'🤷♂️
Thank for the great videos honesty the amount of abuse you put it through has me sold haha now I need to get one
It’s funny how traxxas is like the beetlejuice of the rc world now. Say the name 3 times in conjunction with a product and presto!!!!! Lawsuit.
🤣👍🏼
Man good to see the clone getting a beat down
For being brushed that thing had some jam for sure
Even with the 2 speed was not expecting that kind of speed out of a 35t!! It had a short but impressive life RIP no name 35t lol
Really enjoyed this one!
TRX Cease and Desist letters inbound! Look out!
😂😂😂
Rad vid. As always, thx for all the content. 👊🏼
That much speed from a 35t is a bit suspect - no telling what that motor is 😂🤷🏼♂️.
Sorry buddy hit the wrong button but anyways that 35 turn crawler motor with a non replaceable in Bell those rushes overheat so easily and you were running the piss out of it! Great clone from the dollar thanks for the video
That's the kind of crawler I like ! Looks great
This thing is awesome, Muchos Gracias for the find I will be adding this to my collection. I wound up having a spar 2300 Fusion pro and have been trying to figure out what to use it for.
NICE!! Love that video!! I can’t believe that axial won’t sue them for making an exact copy of the axial wraith
It’s the 180 off twin ridges for me. That was super awesome 😎
I really appreciate it as a little vengance on traxxas :D Each one of these sold is one less sold by traxxas :D
That was cool, can't wait to see it with the Brushless setup installed. If I had Traxxas products already where I could use spare parts from them I would have to try this just to aggravate the Traxxas fanboi's 🤣🤣🤣
Awesome video as always 👍🏼
I don’t think this is aggravating anyone?
@@V8chump The day isn't over yet.
Tomorrow Morning will be the Brushless, I used a 3300kv Axe system and dudes it FLIES!!!
@@adamrodgers2377 ….. uhh Okay?
@@ExocagedRC Awesome! Can't wait!!!
Wow you just made these fly off the website you can buy 3 for the price of one heck of a deal ain't it awesome thanks for sharing
That looks like massive fun!
Dude, you are trying to break it. Turned out to be a torture test 😅👍🏽
Just waiting to check it with the brushless power, if it survives i guess i will finally have one of those 👍👌
It survived
@@ExocagedRC nice 😁
I am impressed brother I had a good feeling it would be a good truck for cheap.
I ordered one knowing that they'll probably disappear quickly due to legal action. Looks like you set yours up with the same peripherals I plan to. Got plenty sitting around waiting for a home. Great video!
Dude , really impressed with this rig from Austar! This thing is Epic! Great beat down!💯👊🏼😎✌🏻
200$ is a steal. I like the speed it has out the box. It’s a good platform to customize
How did u fit the servo in that location.
Mine dont fit
I needed a shorter wheel base(275mm) for a body I've had for Awhile. Found one, came assembled with Everything except esc and body mounts. Here to find out it Is clone of scx10ii raw builders kit v2 but with painted rails and anodized shocks. Hundred$cheaper.😊 Finally Something works out in my favor.
It took it👍 motor died, but that's a great reason to go brushless ...yes!!🙌
VERY surprising. I'm ready to see where this goes.
For the price, this is Awesome!!
Very impressive now lets wait to see how is it with brushless. Thanks exo
Personally, I'd throw some brass diff covers, brass wheel weights, and heavier wheels on it and move the battery up front. And maybe some hex extensions. Bias everything low to the ground and up front.
Hey that looks a lot like a.. (looks over shoulder) like a lawsuit😅.
I might grab one before they disappear.
Good bash
Hello, how many channels do I need to drive this crawler? thank you
I'd say it did pretty darn good for a clone!
Is the rear shock angle to the back or is it just camera angle?
Put some boggers on it and do the hill climb / mud run thing with it lol
Oh I will, maybe some 2.2's
It's amazing to me that company "T" does not like other companies making upgrades for their cars, yet companies like this exist.
Be curious to know if the trans is still plastic gears (that's how they started out) Been running a set of the axles for a year and they're still tip top. Way cheaper than the "T" who shall not be named and fine for casual use
its not, I had a very first demo version when I got my first Defender
Hey Joe, what's the ax 6x6 linked with that? Is it a trx 6x6?
I have no idea about that
Just curious what flew off at 7:25 or so. Maybe a non issue part. Dang Joe. You gave that a beat down 😮
looks like dirt clods to me
Awesome possum
Him not unplugging the battery traumatized me.
Man that thing took a beating! Yep, just ordered one because.....why not at that price 😁 and I sprung for the fake hyrax for an extra $10 👌
Wait till you see the brushless Beatdown….
"one born every minute" comes to mind...😅
I’d pass on the silicone hyrax… they’re absolutely worthless if they get wet
That's a good price. What does this come with? Rtr? Does it come with a transmitter and receiver?
Slider with motor and shift diff servos. You can get the tires like I did. Then it’s a roller. Just needs steering servo and esc.
And a body
Clone but superior ...yeahh
I hate ordering from direct overseas but it’s almost worth it to have a kick around machine to let friends run that don’t have RC’s ( yet) lol
Hey Joe, I'd love to see a real comparison test of these tires. I have a set on my gen8 axe and absolutely love them
I did that a few years ago, hey do fine but wear fast, at least for me they did
Throw a set of monster truck tires on there and give it a good bashing. 😉
Nice video.
I'm not a big fan of crawlers but this thing is pretty dang impressive, Exo should enter a freestyle competition with this thing!! hehe 😁
I'm surprised the Transmission didn't go
A comment in the introduction video talked about how theirs broke down in two runs. I was hoping that your test would be pretty thorough to make sure we would see any weaknesses. The fact that the video opens with the truck in the air tells me were about to find out for sure.
If it holds upmtomthat as a crawler it should be quite durable!! Lololol!!!
Everyone should clone them for going after the little guys....they have been charging how much for that designed for freaking ever!!
Max10 g2 80a and 3300kv g3 would be a good test ;)
I want one!!!
Mamba x crawler edition with the slate 2280kv would be a blast lol tough too wow😂😂😂
The 3300kv axe system is the perfect choice
You haven’t see that one for members?
That’ll be up tomorrow. It’s insane what it did.
No, but I have a Trx4 with that system. It's insane to say the least
Check it out, it's like a clone of an trx 6 for 349 bks I think. Link is in same page as the other link ya had.
I just saw that its in my cart. Whether or not I click buy... I'm thinking..
After that abuse session and no clicking or grinding noises from anywhere, WOW!!!
The clone is so much better
This clone won’t shut your website down
Heard you mention that on the live stream. I've had one for nearly a year now. Have had 2 problems that happened to me a lot. Broken plastic ball ends on the steering link. I use longer wheel base and stretch the rear locking cable. It's a pretty sweet chassis for a "clone". Mine is pretty heavy.
I'll be surprised if it stays on the market for long!
Well we will see
hopefully it dies a slow painful death and they go bankrupt..can't stand thieves who lack the originality or talent to actually come up with something of their own so they ride on the backs of others like some sort of leech......🙄
That is coming from china 😂😂 they don't give a f@ about what the other guys say or do 😂🤣🤣😂
Seems durable enough that you could reasonably buy this chassis for a basher/mud truck. We know fast crawler dont really make the best crawl rigs. So you could buy this cheap throw a 13.5 and some beefy tires and rip it to your heart's content because it's not your $1,000 comp rig.
Let's see how his next video goes with the 3300 very excited for this. Results determine if I hit buy now.
You will like it... I drive a LOT harder and only break the body mount piece on the front, the truck takes it very well
for that to take that much abuse and not break .... thats a no brainer !
next video: sportish comparison
To the moon!!
I guess this is for all the haters to get and still say they don't own a Traxxas
😂😂
Exactly what I'm going to do 😂😂i like the cars, i just hate the company 😂😂
Very well torture test.
Doesn’t this company make drones also?
Austar makes a lot of things.
The original. Afraid of Traxxas ?
is it a clone of something like a tracks arse? 👍🍺🇬🇧
What's the name of it looks like Traxxas clone onh no can't say that Traxxas crazy
You just didn't try 'hard' enough...lol. Need to give it the "Kevin Talbot torture test".
Screw traxxas, idk why you dont just say it XD who cares what they think
Not a clone ! Just a similar design.
I’d say those back shocks got no oil. Very bouncy lol. Seems to preform better then the actual thing
With respect to what I said earlier, I'm impressed.
I would never knowingly buy a direct clone of anything..phuq the chinese copyright thieves...