When I was a kid my grandma gave me a farmall M toy ever since that day I’ve been attached to farmall m’s they remind me of my grandma Miss you grandma ❤️❤️❤️
I worked on a small dairy farm that had a Super MTA and we used that every day even though he had a new 1066. That was one of the best tractors to use and that TA was really handy .
IH tractors and trucks were popular in Australia 🇦🇺 too, although we variants on some of the models, I know my great uncle ran a fleet of IH trucks in his transport company in the 50s, 60s and 70s, some were C1800 IH, others were cab over 1830a ACCO's and others butter box ACCO's.
Yes, but well developed by IH by the time of the MD. They used it on the TD-series crawlers built from the early 1930's. We had three TD40s on my Dad's farm, along with an M (built long before the Super M) and three Hs for planting and cultivating.
My great grandpa had a MD and my dad and I just got one a few days ago it now runs and drives and me and my brother plan to take it and my dads M and also my grandpas about to be mine’s M on a tractor drive this summer
Cultivated many an acre of corn and soybeans with a Super MTA and 4-row cultivator working for a neighbor in the late 70's and into the 80's. It was also used as a secondary plow tractor, chore tractor for grinding feed and loading manure, as well as plowing snow. With the same owner the whole time. Great old work horse. Still in the same family as far as I know. Didn't know they only made them for 1 year.
Those where the greatest tractors ever built I know I worked at Louisville works for over 15 years and have used IH's for over 50 years. Still do to this day.!!
MV 's were my favorite, they were popular here on sugarcane farms,, I have owned 2,also a '54 Super M TA, with a single front wheel out of cotton and corn farm's of North La.
I have a 1952 Super M factory propane version that I have restored and I absolutely love it. Don't let the HP rating fool you. This is a very strong tractor. At the time, The Super M was the largest tractor you could buy.
Between Me and my dad we have owned many farmalls, I Always wanted an M but never got one. Beautiful tractor. Thanks for the video. I really enjoyed it. That tractor would have been great for pulling a disk.
The 1954 Super MTA was also only the second year with full time independent hydraulics from the factory. The Super M and Super W6 shared an engine and were blessed to be offered an engine hot rodding kit from M&W. By increasing the compression ratio and upping the governed RPM's, draw bar horsepower could be jumped to as much as 56 horsepower. That turned your M from a 3x14 inch plow tractor into a 4x16 inch plowing rig. Of course, a lot of extra ballast was also in the mix.
That's not true. On the Farmall M it is, But The W-4, W-6, and W-9 series tractors, if equipped with hydraulics, had live hydraulics from the factory. They were available from the mid 1940s on I believe. The Super A and Farmall C touch control systems were a live system as well.
I have a 1954 Super M with a trip bucket and a wide front. I use it to move snow and I keep the ground cultivated around the farmstead. I don't know what kind of cultivator it is but it was on the property when I bought it. I had to do some repairs. The M had a hydraulic pump leak that I, after 15 years, got fixed. I hope I never have to remove the hydraulic pump again. Also if any of you get an old tractor make sure that you check the rear end for water. Water gets in by condensation. The 1st year that I had it the water froze and took out the bull gear and the bearings put a hole in the rear end. Thank God I knew how to weld cast iron. The repair of the hole has lasted over 15 years. I did put JB Weld putty over the welds and this year I had to replace the putty. The bull gear replacement was not hard, just took some time. In the last two weeks, I have had it out every day moving snow, staying on it till I get too cold. Well, we just had another snowstorm so I will be at it again in the morning.
I was in grade school, came home Dad bought a Super MTA with a two point quick hitch, then we got a two point quick hitch International 4 -14 mounted plow . Remembering all of my Uncle say it would never pull it. It did just excellent 2nd and 3rd on good bean ground. Tractor. Pulling was just starting, an WC NEIMAN told Dad bring that M. At the fair were a lot of M . Dad always came home a winner . Those were the days. 1950's
My grandfather bought a Farmall 'M' used back about 1968. However, he didn't like the tricycle front end, so he had a local tractor shop install a wide wheel steering set like was made for the Super 'M', and we liked it much better. Oddly, this tractor had one of the strangest engines I ever saw, and I notice that it is not included in this story. It was a five cylinder gas. I have never seen one before or since. As I recall, it also had a five-speed transmission. This tractor ran well, and gave good power and service.
Super M wide front was our daily driver on the farm in the 70's. Manure spreader, feed grinder, haybine, cultivator, field chopper, corn planter, corn picker....
My dad got a big bore kit or something like that on his M and my grandpa’s M when I was 5-6 years old and to this day he still has a photo in his shop of me and him working on it...he says it puts out around 70HP
I currently have two Super MTA Farmalls. The running "joke" among tractor enthusiasts here in Iowa is that it is the "rarest tractor that everybody has!" It does seem like many are still up and running. I would be curious to know how many nationwide are still running? I may ask on a Farmall discussion board sometime. It will be hard to get an accurate count however.
I have my grandpas 47 M that he put a bunch of M&W options in after he shot a rod out the side of the block. I got it running again and changed it to 12v after it sat in an open shed for about 15 years. It dynoed 37hp and just needs new front bolster bushings.
Learned how to run the hay baler on a standard M when I was 8. 1962. Later in life I built an 80 hp super M motor for my dad and brother to tractor pull with.
Grew up on Family Dairy Farm, we had an H. 2 Super M. An MDTA, Sold the H got a 450 Diesel , Sold the 2 Super M's got a 706 last purchase was a 1066 with Cab.
If it's an M I like it. But if I was choosing from a collectable standpoint it would be the conversions like the Sheppard and the Detroit or the Cummins. Growing up in Pa and having a local dealer close back in the day that sold Sheppards I have always been fascinated by them. Someday I hope to own one of them.
International Harvester owned and operated a open pit iron ore mine in Nashwauk Minnesota on the Mesaba iron range an later sold it to Cleveland Cliffs Iron Mining Company, the mine was known as the Hawkins Mine an it was started by George Crosby who started the Cuyuna iron range in north central Minnesota
I like the M and the MD. Party because my grandfather used a M alot on the Dairy Farm he worked on. Could you do another video like this but with the Farmall H?
One of my most favorite tractors was a SMTA that I traded a Super C for. I had to do quite a bit of work to it but it was worth it, my all time favorite baling tractor! It is the one tractor that I’m sorry I let my wife talk me into selling.
We had an Farm All H series tractor with IH cotton stripper mounted on it. Cotton harvesting was the only farm task this tractor was used for on our farm.I don't recall the the H tractor was ever used for plowing. That was in the late 1950's or early 60's so It has been more than 60 years ago. I do remember that the tractor was parked in the late 1960's and never used again after a John Deere cotton was purchased to use on our John Deere 3020 series tractor. Wasn't the Farm All H series a smaller less powerful than the M?
Harvester also offered a Detroit Diesel dealer installed conversion during the mid 50's. I have seen a couple of examples but I don't recall the specs.
I'm a John Deere guy myself but I did like the m Farmall a lot of or neighbors farmed with m farmalls I also enjoyed driving my neighbors farmalls c with a belly mower attatchment
THIS IS THE FIRST TIME I SAW A SHEPPARD CONVERSION BUT I HEARD OF THEM!! THE WEAK PLACE ON THE CHASSIS WAS THE BULL GEARS AND PINIONS ON THE REAR AXLE DRIVE! THE TORQUE AMPLIFIER WAS A BIT WEAK ALSO! THERE WAS ANOTHER WHEATLAND VERSION OF THE "M", THAT BEING THE W-6 SERIES! THESE TRACTORS WERE THE BEGINNINGS OF THE MODERN TRACTOR!
Love m all..i have a 47 and 50 M and a 52 super M..would love an Mta but they're kinda pricey around here. Maybe I'll find one that needs rebuilt one of these days...🤞
I own a 350 with the TA and independent PTO. While transmission technology has moved on, the TA still is impressive, and I won't own a tractor without independent PTO.
I love them all . Although we only had one person that had a Farmall m when I was growing up. And he was our neighbor and I believe he pulled a three bottom or four bottom plow with that m. I know he had a sprain tooth arrow that worked on hydraulic cuz his had a hydraulic pump on it. Springfield herald had a hydraulic cylinder with wheels on it. Anyway I love them old tractors like that they're all awesome.
The Sheppard conversion is a bit of an oddity as IH made a diesel version of the Farmall M called the Farmall MD. it was built from 1941 onwards. There was also a diesel version of the MV high crop called the MDV. The most collectable of the Farmall M lineage would be the Super MDV-TA (high crop diesel - with Torque Amplifier) built in 1954 only, and only 36 were built
My neighbor told me he looked into getting a sheppard dealership. He went to Hannover pa and the showed him around. He claimed they had a refrigerated room where they tested cold starting. He claimed the lit a cold engine with no starting aids in sub zero temperature. The farmall diesel was an utter abortion.
That "pop, pop, brummmmm" meant our cows were gonna eat tonight. Dad had an M that had kinda been converted to a 12 volt system, so, of course, we left the six volt battery in it, and jumped it from a 12 volt in cold weather. You'd choke it and if you let it crank just a bit too long, it would flood and drip fuel from the carb, just inches from where one had to connect the jumper cables from the 12 volt battery if you were going to have any hope of starting it. Many a cold winter evening I hooked up the 12 volt to a burst of sparks, punched the starter and held the choke out and crossed my fingers that it would go, and more often than not, it did. Hot or cold, it sometimes took some doing, but it nearly always ran, got the job done.
In Britain the US built Farmall M was replaced by the British built Farmall BM in 1949. The 1940-48 US built Farmall M in Britain is a rarity nowadays as not many were imported during WW2
My brother's father in law repainted an old M, then brought it out to the farm to shake out the bugs making hay.We always baled with a JD60, but this old fart wanted to bale with his M.(no live pto) It was an IH 45 or 46 baler with a roller thrower and on the 60 two cyl. it worked great just under 540pto rpm, and the surging of the baler and the big tractor flywheel and the touchy knotter, it worked great, the live pto was a beautiful thing,putt putt putt tie bale. It wouldn't tie three bales in a row behind the M, and he set the brakes to get off while it was running to see what was up with the knotter(you've probably already guessed what was next) the baler flywheel rocking unloosed the barely working tractor brakes and away it went. Rolled the M,jacknifed the baler into a pretzel, wrecked the haywagon with 50 acres raked up ready to baler. His first question was "Do you guys have insurance ?" Our response : "No, but your wife had better hope you have life insurance ." We have many other Farmall failure stories back home, many revolving around non-operative braking, and after running JohnDeere so many years, especially the ones with PARK in the transmission you have to wonder how stupid can RED guys be?
My father had a farmall M with before wide train, in France in 1960 he was dieselized with a Perkins 4-270 direct injection motor (rotary injection pump CAV) 57 HP. he travelled more than 20000h-
Just picked up a British SBM D so it says on the alu tag with the American wide front which is different to the British built ones. Yet it says built ay ih's Doncaster factory in Britain.
Before he passed away 10 years ago my dad fully restored a 1953 Super M with the wide front. We still have it. Love that tractor.
That’s awesome. Keep that thing forever.
M is still my favorite tractor
I've found several nice Super MTA 'S. But not for sale.
When I was a kid my grandma gave me a farmall M toy ever since that day I’ve been attached to farmall m’s they remind me of my grandma
Miss you grandma ❤️❤️❤️
Learned to drive on a 53 super M narrow front with a loader. Loved that ol tractor.
I bought a 1941 M Farmall in 1968. It pulled a fourteen three bottom plough in 4th gear all day long, super tractor.
I worked on a small dairy farm that had a Super MTA and we used that every day even though he had a new 1066. That was one of the best tractors to use and that TA was really handy .
IH tractors and trucks were popular in Australia 🇦🇺 too, although we variants on some of the models, I know my great uncle ran a fleet of IH trucks in his transport company in the 50s, 60s and 70s, some were C1800 IH, others were cab over 1830a ACCO's and others butter box ACCO's.
I drove a MD out in Israel in 68!
Great fun to drive and was extremely reliable.
What a monster.
The MD is a very interesting piece of engineering. Ability to start on gas and then switch to diesel. Love the concept and no pony motor to deal with!
Yes, but well developed by IH by the time of the MD. They used it on the TD-series crawlers built from the early 1930's. We had three TD40s on my Dad's farm, along with an M (built long before the Super M) and three Hs for planting and cultivating.
I have a 1953 Super M and its a absolute marvel . IH tractors were the best ever manufactured.
We had a Super MD when I was a kid, great tractor!
My great grandpa had a MD and my dad and I just got one a few days ago it now runs and drives and me and my brother plan to take it and my dads M and also my grandpas about to be mine’s M on a tractor drive this summer
Just picked up a 53 Super M with the V front wheels. Its an amazing tractor all restored
Cultivated many an acre of corn and soybeans with a Super MTA and 4-row cultivator working for a neighbor in the late 70's and into the 80's. It was also used as a secondary plow tractor, chore tractor for grinding feed and loading manure, as well as plowing snow. With the same owner the whole time.
Great old work horse.
Still in the same family as far as I know. Didn't know they only made them for 1 year.
We had larger tractors on our farm but the Farmall M we had was my absolute favorite to drive👏🏻👏🏻
My brother has a Super M and a Massey Harris 50 which has same power train as a Ferguson 35, on his 10 acre hobby farm. They both still run great.
Those where the greatest tractors ever built I know I worked at Louisville works for over 15 years and have used IH's for over 50 years. Still do to this day.!!
MV 's were my favorite, they were popular here on sugarcane farms,, I have owned 2,also a '54 Super M TA, with a single front wheel out of cotton and corn farm's of North La.
I have a 1952 Super M factory propane version that I have restored and I absolutely love it. Don't let the HP rating fool you. This is a very strong tractor. At the time, The Super M was the largest tractor you could buy.
Between Me and my dad we have owned many farmalls, I Always wanted an M but never got one. Beautiful tractor. Thanks for the video. I really enjoyed it. That tractor would have been great for pulling a disk.
Learned to drive tractor at eight years old, It was on a IH Super M!
The 1954 Super MTA was also only the second year with full time independent hydraulics from the factory. The Super M and Super W6 shared an engine and were blessed to be offered an engine hot rodding kit from M&W. By increasing the compression ratio and upping the governed RPM's, draw bar horsepower could be jumped to as much as 56 horsepower. That turned your M from a 3x14 inch plow tractor into a 4x16 inch plowing rig. Of course, a lot of extra ballast was also in the mix.
That's not true. On the Farmall M it is, But The W-4, W-6, and W-9 series tractors, if equipped with hydraulics, had live hydraulics from the factory. They were available from the mid 1940s on I believe. The Super A and Farmall C touch control systems were a live system as well.
I have a 1954 Super M with a trip bucket and a wide front. I use it to move snow and I keep the ground cultivated around the farmstead. I don't know what kind of cultivator it is but it was on the property when I bought it. I had to do some repairs. The M had a hydraulic pump leak that I, after 15 years, got fixed. I hope I never have to remove the hydraulic pump again. Also if any of you get an old tractor make sure that you check the rear end for water. Water gets in by condensation. The 1st year that I had it the water froze and took out the bull gear and the bearings put a hole in the rear end. Thank God I knew how to weld cast iron. The repair of the hole has lasted over 15 years. I did put JB Weld putty over the welds and this year I had to replace the putty. The bull gear replacement was not hard, just took some time. In the last two weeks, I have had it out every day moving snow, staying on it till I get too cold. Well, we just had another snowstorm so I will be at it again in the morning.
back in the 60's we had a super m t a i put a lot of hr's on that tractor. wish i had it today.
I was in grade school, came home Dad bought a Super MTA with a two point quick hitch, then we got a two point quick hitch International 4 -14 mounted plow . Remembering all of my Uncle say it would never pull it. It did just excellent 2nd and 3rd on good bean ground. Tractor. Pulling was just starting, an WC NEIMAN told Dad bring that M. At the fair were a lot of M . Dad always came home a winner . Those were the days. 1950's
We had a super M on our farm back in the sixties here in NewZealand,a great ,reliable tractor and easy to work on.
SUPER MD, grew up with this model just one of the great lineups of IHC.
I have just purchased an M and also an H, they both need a little work but I grew up running these tractors
Dad had quite a few farmall. Sold him my 49 M. Great old tractors.
My dad and I just got a 49 MD a few days ago
My grandfather bought a Farmall 'M' used back about 1968. However, he didn't like the tricycle front end, so he had a local tractor shop install a wide wheel steering set like was made for the Super 'M', and we liked it much better. Oddly, this tractor had one of the strangest engines I ever saw, and I notice that it is not included in this story. It was a five cylinder gas. I have never seen one before or since. As I recall, it also had a five-speed transmission. This tractor ran well, and gave good power and service.
Great video. alot of good technical info and specs there.
In about 1950 I started operating a 1940 M and ran it until 1962. Also an MTA. The MTA was restored and is still going today.
Super M wide front was our daily driver on the farm in the 70's. Manure spreader, feed grinder, haybine, cultivator, field chopper, corn planter, corn picker....
super md- ta my great uncle had one, takes me back lol
Saw somewhere that GM offered a 2-71 conversion kit for the M, bumping the horsepower output to somewhere around 50HP
My dad got a big bore kit or something like that on his M and my grandpa’s M when I was 5-6 years old and to this day he still has a photo in his shop of me and him working on it...he says it puts out around 70HP
The U.S. Navy used quite a lot of these diesel GM units, painted gray.
Well I am a big fan of old machines so I like them all haha. I enjoyed that MV. Some reason the high crop versions are neat to me.
They are all something special
My dad had an H years ago, I'll never forget that rusty pos. The engine was like a purring kitten and the smell of the gas was the best.
I currently have two Super MTA Farmalls. The running "joke" among tractor enthusiasts here in Iowa is that it is the "rarest tractor that everybody has!" It does seem like many are still up and running. I would be curious to know how many nationwide are still running? I may ask on a Farmall discussion board sometime. It will be hard to get an accurate count however.
Farmall M was all so legendary.
I have my grandpas 47 M that he put a bunch of M&W options in after he shot a rod out the side of the block. I got it running again and changed it to 12v after it sat in an open shed for about 15 years. It dynoed 37hp and just needs new front bolster bushings.
Farmall M is my favorite antique tractor.
Learned how to run the hay baler on a standard M when I was 8. 1962. Later in life I built an 80 hp super M motor for my dad and brother to tractor pull with.
Same era M ahead 50-tbaler
@@irvinhoffman1710 We had a 55T PTO baler. It sat in storage from 1977 to 2018. My nephew uses it now.
Back in the 2000's I farmed with a SMD. I'm glad it blew up.....
I preferred the international super M i love it and it's one of my favorite international tractors out of them all 😃
I worked with the MD with the forward under potato cultivator . I see you don’t have one I was hoping to see one.
Grew up on Family Dairy Farm, we had an H. 2 Super M. An MDTA, Sold the H got a 450 Diesel , Sold the 2 Super M's got a 706 last purchase was a 1066 with Cab.
I prefer it Red... mine is a 1941 M... that I plan on restoring and doing parades with it... 👍🤠🇺🇸
My Favorite M
based International tractor was the T6 crawler It would out pull our TD6.
If it's an M I like it. But if I was choosing from a collectable standpoint it would be the conversions like the Sheppard and the Detroit or the Cummins. Growing up in Pa and having a local dealer close back in the day that sold Sheppards I have always been fascinated by them. Someday I hope to own one of them.
I'm in pa too, and m are everywhere
The super c and cub series were good too. Ran forever.
Interesting while growing up in the 90's how many of these older Farmalls my uncle and cousins had on their farm.
International Harvester owned and operated a open pit iron ore mine in Nashwauk Minnesota on the Mesaba iron range an later sold it to Cleveland Cliffs Iron Mining Company, the mine was known as the Hawkins Mine an it was started by George Crosby who started the Cuyuna iron range in north central Minnesota
Who owns it now? China?
I love the MDTA, I have always wanted to find one of these but I have only found and drove one but I did not have the money at the time to buy it
Best damn tractor ever made .
That's what the Allis guys say about the WD45!
I like the M and the MD. Party because my grandfather used a M alot on the Dairy Farm he worked on. Could you do another video like this but with the Farmall H?
My dad didn’t like the super M and super MD because of the brakes he said the super M and MD had disk brakes
One of my most favorite tractors was a SMTA that I traded a Super C for. I had to do quite a bit of work to it but it was worth it, my all time favorite baling tractor! It is the one tractor that I’m sorry I let my wife talk me into selling.
We had an Farm All H series tractor with IH cotton stripper mounted on it. Cotton harvesting was the only farm task this tractor was used for on our farm.I don't recall the the H tractor was ever used for plowing. That was in the late 1950's or early 60's so It has been more than 60 years ago. I do remember that the tractor was parked in the late 1960's and never used again after a John Deere cotton was purchased to use on our John Deere 3020 series tractor. Wasn't the Farm All H series a smaller less powerful than the M?
💥Boom💥
Harvester also offered a Detroit Diesel dealer installed conversion during the mid 50's. I have seen a couple of examples but I don't recall the specs.
God bless you!
I'm hoping to get interviewed on here one of these days. : )
Better own a museum lol
Charlie has been interviewed. John deere 2010 a few videos back.
I'm a John Deere guy myself but I did like the m Farmall a lot of or neighbors farmed with m farmalls I also enjoyed driving my neighbors farmalls c with a belly mower attatchment
My papa has fully restored a farmall MD, and it was originally my dads so I think I possibly inherit it one day
Great Video!
THIS IS THE FIRST TIME I SAW A SHEPPARD CONVERSION BUT I HEARD OF THEM!!
THE WEAK PLACE ON THE CHASSIS WAS THE BULL GEARS AND PINIONS ON THE REAR AXLE DRIVE! THE TORQUE AMPLIFIER WAS A BIT WEAK ALSO!
THERE WAS ANOTHER WHEATLAND VERSION OF THE "M", THAT BEING THE W-6 SERIES!
THESE TRACTORS WERE THE BEGINNINGS OF THE MODERN
TRACTOR!
Love m all..i have a 47 and 50 M and a 52 super M..would love an Mta but they're kinda pricey around here. Maybe I'll find one that needs rebuilt one of these days...🤞
The picture of the Super MD shows a distributer on it. Is that a correct picture?
I have a 55 IH utility 300. I think it's only 169 ci. Not sure about the hp. Trying to restore
MD all the way!
If you can find one that actually has a cylinder head that ISN'T cracked
@@dalekrueger1175 me and my dad just got one that was rebuilt a few days ago but we haven’t gotten it to run on gas very good but it runs on diesel
My Dad had a super M and a MD. I like the Super M.
We have both the Normal M and just bought it a 53 Farmall Super MV
I own a 350 with the TA and independent PTO. While transmission technology has moved on, the TA still is impressive, and I won't own a tractor without independent PTO.
Family has several Super M's and an Super MD, as well as a few M's and a passel of TD-6 and 9s
I love them all . Although we only had one person that had a Farmall m when I was growing up. And he was our neighbor and I believe he pulled a three bottom or four bottom plow with that m. I know he had a sprain tooth arrow that worked on hydraulic cuz his had a hydraulic pump on it. Springfield herald had a hydraulic cylinder with wheels on it. Anyway I love them old tractors like that they're all awesome.
At 4 liters and above, those 4 cylinder gas engines were big, producing a lot of torque.
I would like any M full of the M&W after market add on stuff . But I guess I vote for the
Mta but with the after market M&W pistons
Very nice!
My grandpa has a super MTA, I just drove it in a parade at old threashers
The Sheppard conversion is a bit of an oddity as IH made a diesel version of the Farmall M called the Farmall MD. it was built from 1941 onwards. There was also a diesel version of the MV high crop called the MDV. The most collectable of the Farmall M lineage would be the Super MDV-TA (high crop diesel - with Torque Amplifier) built in 1954 only, and only 36 were built
My neighbor told me he looked into getting a sheppard dealership. He went to Hannover pa and the showed him around. He claimed they had a refrigerated room where they tested cold starting. He claimed the lit a cold engine with no starting aids in sub zero temperature.
The farmall diesel was an utter abortion.
That "pop, pop, brummmmm" meant our cows were gonna eat tonight. Dad had an M that had kinda been converted to a 12 volt system, so, of course, we left the six volt battery in it, and jumped it from a 12 volt in cold weather. You'd choke it and if you let it crank just a bit too long, it would flood and drip fuel from the carb, just inches from where one had to connect the jumper cables from the 12 volt battery if you were going to have any hope of starting it. Many a cold winter evening I hooked up the 12 volt to a burst of sparks, punched the starter and held the choke out and crossed my fingers that it would go, and more often than not, it did. Hot or cold, it sometimes took some doing, but it nearly always ran, got the job done.
i have 1953 smd with its work clothes on 450 bore kit never had on it dyno any ideas
I've got a Super MTA diesel on my wish list.
My dad bought one of these brand new. Step up from a John Deer iron-lug wheeler. My mom had to go get him to come home at night.
There was also a Detroit Diesel conversion as well.
In Britain the US built Farmall M was replaced by the British built Farmall BM in 1949. The 1940-48 US built Farmall M in Britain is a rarity nowadays as not many were imported during WW2
How many factory wide front Ms were made?
My brother's father in law repainted an old M, then brought it out to the farm to shake out the bugs making hay.We always baled with a JD60, but this old fart wanted to bale with his M.(no live pto) It was an IH 45 or 46 baler with a roller thrower and on the 60 two cyl. it worked great just under 540pto rpm, and the surging of the baler and the big tractor flywheel and the touchy knotter, it worked great, the live pto was a beautiful thing,putt putt putt tie bale. It wouldn't tie three bales in a row behind the M, and he set the brakes to get off while it was running to see what was up with the knotter(you've probably already guessed what was next) the baler flywheel rocking unloosed the barely working tractor brakes and away it went. Rolled the M,jacknifed the baler into a pretzel, wrecked the haywagon with 50 acres raked up ready to baler. His first question was "Do you guys have insurance ?" Our response : "No, but your wife had better hope you have life insurance ." We have many other Farmall failure stories back home, many revolving around non-operative braking, and after running JohnDeere so many years, especially the ones with PARK in the transmission you have to wonder how stupid can RED guys be?
My father had a farmall M with before wide train, in France in 1960 he was dieselized with a Perkins 4-270 direct injection motor (rotary injection pump CAV) 57 HP. he travelled more than 20000h-
Super MTA..
What about a Farmall SMTA with front wheel assist driven from a gearbox where belt pulley mounted.
Grew up on a Super MTA with F11 loader
I don't think the Super MTA diesel with a TA was mentioned. A friend of mine has one.
There were over 20K Super MTAs built not 2700. Serial numbers start at 60001 and end at 81848.
Just picked up a British SBM D so it says on the alu tag with the American wide front which is different to the British built ones.
Yet it says built ay ih's Doncaster factory in Britain.
those tractors are impresive sad that no one make over wive how those worked exactly Im curiuse as well how the MD worked
i love em all.
A little known federal law which is not enforced in some areas is that any farm needs to have a M on the farm to farm legally
Love it,I have 2 m's and a 100
Most tractors back than were talked about in pto hp as most dealers had a dynomoniter
SUPER M!!!
Grew up on a Super M-TA
Wasn't there a Detroit Diesel conversion too or was that a individual repair shop conversion. ..I've seen a couple.
DD was robably an aftermarket conversion. In Britain Perkins offered a diesel conversion for the Farmall H & W-4 tractors imported there.
I have a fully restored Farmall Super MTA.