ฝัง
- เผยแพร่เมื่อ 17 พ.ย. 2017
- Nextion HMI displays are great. But the documentation and the support is not very good, and the library currently does not work with the ESP32. Today I will show you the five most important features of the enhanced version and how to use them.
In the end, you will have a small keypad which can be used as a control center for your home automation. And of course, the library works now with the ESP32, not only with the Arduino.
I did already some videos about Nextion displays. They are the basis for this video and worthwhile to watch because I will not cover these details again. You will find links in the description.
Today we will:
1. Build a small device using a Nextion display with 6 Softkeys
2. When one of these keys is pressed, the beeper on the extension board will beep. You will learn how to achieve this by programming the display itself
3. Each key triggers an MQTT message. This message can be used to switch devices in your home-automation system
4. The device can receive MQTT commands and switch a relay accordingly
5. The enhanced version has a Realtime clock aboard. We will synchronize this clock once using internet NTP time. From then on, the display updates the time itself
Links:
My Nextion videos: • Displays (Nextion etc.)
Code: github.com/SensorsIot/Nextion...
Another library: github.com/darrenjcosborne/Ne...
Enahced Nextion displays:
Different sizes: s.click.aliexpress.com/e/bBVLEfQ0
3.5" Enhanced Nextion Banggood: bit.ly/2zSlqGI
7.0" Enhanced Nextion: bit.ly/2zQPfHY
ESP32 Board: bit.ly/2sOMR3E
Supporting Material and Blog Page: www.sensorsiot.org
Github: www.github.com/sensorsiot
If you want to support the channel and buy from Banggood use this link to start your shopping: bit.ly/2jAQEf4 (no additional charges for you)
Official Wemos Store: s.click.aliexpress.com/e/jUzBiIq
profile.php?...
/ spiessa
www.instructables.com/member/...
Please do not try to Email me or invite me on LinkedIn. These communication channels are reserved for my main job
If you want to buy me a coffee: www.paypal.me/AndreasSpiess - วิทยาศาสตร์และเทคโนโลยี
Andreas, thank you so much for your well done tutorials and the time you invest in sharing your knowledge with us. You are awesome!
You are welcome. I like to do these videos...
Wow, I'm going have to watch this video several times to absorb it all. Very good presentation!
Thank you!
Happy Sunday Morning Andreas 😂🤣😂
You won’t believe it, I watch all your previous videos on this yesterday!
Thinking hmmmm time for an advanced display in my next project. Cool Mr Spiess.
As always thank you kind sir🙏
Good to know that the stuff I present is used somewhere!
Superb tutorial!!!
Thank you for putting all the thought, planning, and effort into your video.
Your excellent organization turned a complicated subject into a simple one that was easy to follow.
Great balance of details: enough to be used as a resource without too much to bog down.
Maybe you should make a video on "Teaching using Videos - My Swiss Method"?
Looking forward to watching all your other videos...
Welcome to the channel! Unfortunately it is much harder to create short videos than long ones ;-)
Well Done Andreas and as usual top quality stuff, excellent.
Thank you!
I've just recently started with ESP32 too but opted for a barebone experience with gcc and their SDK in Linux. Granted I use Eclipse as an editor but other than that I have to do everything by hand. Even tho I don't use Arduino I still learn a lot about these devices by watching your videos. Thank you :)
I stick to the Arduino IDE because most of my viewers use it. Eclipse is not easy to start with...
you are too much , Andreas. Thank you:) This was awesome.
You are welcome!
Thanks Andreas - trying to find where to config the GPIO's was driving me mad! I put them in a timer and that was causing some issues. Keep up the good work.
Thank you!
Thanks for the video. Really learning source and fun ideas
Thank you!
Interesting, thanks for sharing your experiencs 👍😀
You are welcome!
Great as always!
:-)
nice, thank you for your Videos. Regards from Germany
You are welcome!
Thanks for showing an additional example using the HW-serial2 @ ESP32.
Nextion displays have many fans and you are helping them a lot.
But for me, Nextion Displays are too expensive. For my home automation it is cheaper, simpler and more powerful to use a cheap (or retired) notepad / tablet together with the ioBroker Framework.
I think, using old tablets is a good thing. But I did not see IOS or Android support of ioBroker
The ioBroker itself runs on my Orange Pi Plus 2e (Raspi 3, Rock64, Nuc, etc. also possible). The tablets are used for visualization (control also possible). And this can be done using a browser or the Android ioBroker.vis app as clients. Vis is the Name of the visualization Adapter of ioBroker, running on the ioBroker server.
Thanks.
Amazing and as usual very good. Excellent video on a wonderfull product. Btw, your PayPal message is quite original. Guess what, if you come to Belgium I'll buy you a beer. We have some of the best beers in the world. But of course you already knew that.
I do not know how Paypal looks from your side... Thanks for your offer!
I just picked up one of these displays today. I'm planning on using it with an ESP32 and just kinda hoped it would work. I'll be referencing your video to get the display working with the ESP32, but ultimately, my goal will be to use it in conjunction with with Squareline studio/ LVGL with a single rotary encoder as an HID for use as a CNC pendant. I'm up for the challenge. Hopefully these are the bits I need to make this project a success.
Maybe you find a newer library. This is a quite old video.
Hi Andreas thank you for taking the time to make these tutorials, Even a 70 year old nextion noob like me can understand them. I am so new to nextion I am still waiting for my 3.5" nextion enhanced to arrive so for now I use the editor and check the results with the debugger . I was told the official Itead library was not so good but in your tutorials you said you had changed it a little . Could you please give me a link to where I can download your arduino nextion library please and please keep making the great tutorials
This is an old video and for sure, many things changed since then (and my 63-year-old memory is also no more the best). All my links are in the description. If not, there was a reason for not sharing them;-)
Thanks.. I'll do that. Thx
I have a couple of the displays at home but have yet to play with them. Love the MQTT cross over.
I thought it was a good way to show the functionality of the display.
Interesting video as always. How is the "viewing angle" on the enhanced model, is it the same as the standard model? I like the Nextion displays, but i think that the viewing angle leaves much to desire.
I do not own displays of the same size in normal and enhanced. But I think, they use the same panels.
great stuff. thanks
You are welcome!
Andreas, your videos are so helpful! Thank you for making them so easy to understand and follow. I spent too much time trying to connect serial2 on the esp32 with the nextion library without success.
Could you briefly comment on what changes you made to the official nextion library? I changed the initialization function to accept a value which dictates what baud rate to connect with. This way you can specify from the sketch instead of modifying the library. Ideally, I'd like to incorporate your changes with mine.
Do you know of a way that can speed up communication?, even more than increasing the baud rate? 115200 is quick for weather stations or home automation, but not enough for real-time display since serial communication code is blocking. I realize the second core could be used on the esp32, but what about Arduinos? Is there a way to use SPI communication instead? That way we can get 4Mbps which is much faster.
Regards,
Simon
I made a video concerning using other serials with the Nextion. Maybe you find the needed info there. Concerning speed-up I do not know.
Espero que la respuesta a sus preguntas no sea tarde. Intenté sin éxito seguir este video, pero tampoco funcionó. Finalmente, después de una tarde de dar vueltas y vueltas aquí está la solución:
copie el SIGUIENTE en NexUpload.cpp en la biblioteca de Nextion, esto lo sacará de la biblioteca ESPNexUpload.cpp, QUÉ FUE, se debe comentar (// # include
// # define USE_SOFTWARE_SERIAL
// # ifdef USE_SOFTWARE_SERIAL
// SoftwareSerial dbSerial (3, 2); / * RX: D3, TX: D2 * /
// # define DEBUG_SERIAL_ENABLE
// # endif)
Copie el SIGUIENTE en NexUpload.cpp en la biblioteca de Nextion
# si se define ESP8266
#include
#ifndef NEXT_RX
#define NEXT_RX 14 // Nextion RX pin | Predeterminado 14 / D5
#define NEXT_TX 12 // Nextion TX pin | Predeterminado 12 / D6
#endif
#ifndef nexSerial
SoftwareSerial softSerial (NEXT_RX, NEXT_TX);
#define nexSerial softSerial
#define nexSerialBegin (a) nexSerial.begin (a)
#endif
#elif definido ESP32
#ifndef NEXT_RX
#define NEXT_RX 16 // Nextion RX pin | Predeterminado 16
#define NEXT_TX 17 // Pin de Nextion TX | Predeterminado 17
#endif
#ifndef nexSerial
#define nexSerial Serial2
#define nexSerialBegin (a) nexSerial.begin (a, SERIAL_8N1, NEXT_RX, NEXT_TX)
#endif
#endif
Creo que debería guardar una copia del archivo original para que pueda funcionar correctamente con una tabla o mega arduino.
Espero ser de ayuda
The Nextion Editor is no Qt Designer. Mr. Eng and the other Trolls knew what they were doing. The Editor is, I believe, the weakest aspect of an otherwise excellent product. Still, this is so much easier than designing GUIs over SPI bus. Thank you, sir!
You are welcome! For me, the missing docu was the biggest obstacle. Many things seem to be possible, but somehow hidden...
Thank you Andreas
You are welcome!
Thanks. I agree about the nextion support. I found the support frustrating. Displays are nice, highly functional, easy to program and interface. No proportional fonts though, only monospaced.
I did not discover the thing with the proportional fonts. Thanks for the tip.
I first noticed this with fractional numbers. The decimal point bits are left justified, making it tight to the one's digit with a lot of space and loose to the 1/10 digit. Which, at this point in time, is ugly. Proportional fonts have been around in computers since the 70s, why Nextion didn't implement these is based on 'limited space' in the microprocessor. U8Glib handles all this gracefully, but they wrote their own font handlers. They should re-render their monospaced fonts center justified at least, but they probably won't do that either. Font generators for the nextion exist but tweaking each char is a lot of clicking. I spent a fair amount of time on this, if you check the forum you'll see my proportional font hack and can download it. It involves punching each letter directly on the display bitmap and calculates x widths from ttf fonts. Anyway, thanks again for the videos, they're great.
Brilliant !
Thank you!
Excellent video as usual . i do have one query can i connect the Tx,Rx of Nextion regular ( 2.8) version display with the Rx,Tx of nodemcu directly without using a level shifter .i am planning to provide an external 5v supply to nextion.
The pins of the Nextions are 3.3V if I remember right, even if you connect the board to 5V
You mean to say that for the power in it requires 5 V , but the serial communication happens at 3.3V, i have the specs here; www.itead.cc/wiki/NX3224T028, this does say that the optimum voltage is around 3V. Also are you planning to have a video made of nodemcu connected to nextion . The display integrates easily with the arduino uno board , but am having a tough time getting it to communicate with nodemcu.
Wishing you Merry Christmas and awaiting lot more informative video's from you
Merry Christmas to you, too!
Another great video! Is there any reason I couldn't connect whatever I wanted to the I/O pins meant for the expansion board?
I do not understand your question :-(
@@AndreasSpiess Sorry, I'll try again. If I don't buy the Nextion expansion board with the switches, does anything prevent me from connecting something I build in its place?
I do not think so. If you provide the same voltage levels to the connector.
Thank you for providing a Nextion Library that works with the ESP32.
If I do install your library instead of the official ITEAD library, would it still work for the Arduino Mega or Uno?
I do not remember. So you have to try...
will you consider our touch screen display? then contact me
Good,
I have a weird situation, I have the software running for Arduino with my nextion, but if I connect a Wemos / Lolin, the wemos is not able to write or read anything from the Nextion. could you help me, why can it be?
this video is an old one. but i still understood alot of things from this. may i ask, is the ESP32 board compatible with the nextion 7" TFT display ? cant seem to find alot of youtubers showcasing this compatibility yet.
It should be compatible. The Nextion only requires a Serial connection.
Thanks dood!
You are welcome!
a wonderful video and this product is a lot cheaper than HMIs which are $500+up one feature that is almost a project must would be a way to mount the HMI on an enclosure surface such as: Acrylic Case for Nextion Enhanced 4.3" 5" 7" Display HMI TFT LCD Touch Screen "Bezel" price about $7 to cover the edges of the touch-screen 😎 thank you good job
Glad the video was helpful!
Do you have any notes on the changes made to the library for ESP32 compatibility?
No, I did not take notes. But it was mainly around printing. And I added the new example
Thanks to the Guy with the Swiss accent 👍😉
You are welcome!
I hope the answer to your questions is not late. I tried unsuccessfully to follow this video but how it did not work either. Finally after an afternoon of going around and around here is the solution:
copy the NEXT in NexUpload.cpp in the library of Nextion, this take it from the library ESPNexUpload.cpp, WHAT WAS, should be commented (// # include
// # define USE_SOFTWARE_SERIAL
// # ifdef USE_SOFTWARE_SERIAL
// SoftwareSerial dbSerial (3, 2); / * RX: D3, TX: D2 * /
// # define DEBUG_SERIAL_ENABLE
// # endif)
copy the NEXT in NexUpload.cpp in the library of Nextion
#if defined ESP8266
#include
#ifndef NEXT_RX
#define NEXT_RX 14 // Nextion RX pin | Default 14 / D5
#define NEXT_TX 12 // Nextion TX pin | Default 12 / D6
#endif
#ifndef nexSerial
SoftwareSerial softSerial(NEXT_RX, NEXT_TX);
#define nexSerial softSerial
#define nexSerialBegin(a) nexSerial.begin(a)
#endif
#elif defined ESP32
#ifndef NEXT_RX
#define NEXT_RX 16 // Nextion RX pin | Default 16
#define NEXT_TX 17 // Nextion TX pin | Default 17
#endif
#ifndef nexSerial
#define nexSerial Serial2
#define nexSerialBegin(a) nexSerial.begin(a, SERIAL_8N1, NEXT_RX, NEXT_TX)
#endif
#endif
I would believe that you should keep a copy of the original file so that it can work properly with a one or mega arduino board.
I hope to be helpful , Mi ingles no es muy bueno.
Do both models NX3224K028 and NX3224T028 have a 3.3V logic level or 5v? Thanks, cheers
According the datasheet the first uses 3.3V logic levels. I did not check the second.
Where in this setup is the ESP8266? I assume it is to another serial port just not shown in the camera view? I have an UNO that I am looking to do a similar project with, but it appears to use the Nextion and the ESP8266 at the same time will require two hardware serial ports, therefore a mega.
Never mind....I see you are using the ESP8266 in and of itself and flashing your sketch to it.
I made a video about the different boards and how to deal with "Serial"
Andreas,
I need your help. I tested this solution using a Nextion NX3224T024_011 display with ESPDUINO (which uses ESP32), but without success.
The following error message appears on the monitor of the Arduino IDE: recvRetCommandFinished err.
Is this related to the fact that it is a different display? Or is it due to the fact that you are using ESPDUINO based on ESP32 instead of directly using ESP32?
Do you have any idea how I can solve this? I have tested many libraries and researched many other solutions, but all have failed.
Unfortunately I cannot do remote debugging :-( Did you watch all my Nextion videos, especially the one about Serial connection?
@@AndreasSpiess I saw the #152 and #63 videos. I did as you said but the message "recvRetCommandFinished err " still appears. Could you send me the libraries version of HardwareSerial.h and cpp, an SoftwareSerial.h and cpp that you used in these examples?
Subscribed 🙂🙂
Welcome aboard the channel!
@@AndreasSpiess there are many channels showing instrument made with help of Nextion and Android say for example wire striper and cutter but 2hen I seek help to them like how to make it , they are very rude in replying " we are not interested in sharing the knowledge" so I decided to learn ,,☺️ will watch all your video will make efforts for trail and run . Will ask doubts ,☺️
Let me say first that you are one of my favorite youtubers and I enjoy your videos very much. I ordered one of the nextion displays three months ago. I ordered the 4.3 inch. It was not cheap. Since two months ago, nextion has not replied to my many emails. So I think my money is gone. I am not blaming you but this company has horrible customer service. You should take down this video.
Sorry about that. I order at Aliexpress or Bangood (with insurance) where I can start ad dispute if I do not get my goods.
Hi Andreas, I don't have an enhanced Nextion but a modest basic T 3.2 and I couldn't experience this tutorial.
For days I'm fighting with ESP32 and my Nextion but nothing to do. I tried to copy a few lines of code from your examples but nothing. How can I do that? I watched other videos of yours too but I couldn't do anything. The original Itead sample files on ESP32 don't work.
Thanks
Richard
Unfortunately, I cannot do remote debugging. Maybe you find another project with the same devices. Also maybe you start with the simplest possible sketch.
@@AndreasSpiess I tried a simple one like in your video number 59, CompText.ino and same GUI but with ESP32 it doesn't work. For this example with ESP32 I have not modified the file NexConfig.h as for Arduino because it should not be done and I left it original, but it does not work yet.
How can I do that?
Thank you
chip
I have that EasyNextion library that works great!
Thank you for the tip!
I just buy old android phones from a site like craigslist. Replace the battery with a dc-dc converter if needed. Some Velcro or strong magnets in the battery compartment for easy installation.
The you can just make your own Qt QML apps. if you need a large screen an old tablet (slow) is good enough. (prob. even better for the environment).
For sure this is the better solution for the environment!
I went the same direction. For wall control panels, I bought three Amazon 7" Fire tablets on sale for ~$30 each. This gives me wifi, a touch screen, a speaker, a microphone, and a camera, CHEAP! I'm going to use ImperiHome, and a full-screen browser. I still have all the other features, in case I ever have need for them.
It's also inexpensive to get older Android tablets. Many of these, like the Nexus 7, are easily rooted and feature USB OTG. Display, high performance computing, and direct management of multi-tebibyte disk drives. But where's the fun in that??? :o)
Could some share any links to how they change the battery place and how you use it with arduino? Thanks
If sunday then swissday!!! 👍😀
:-))
aha, I guessed that was going on. I saw some Swedish flags around where I live in Australia today.
I did not know they have Swedish people in Austria ;-)
Who Austria ? :P
AUSTRALIA
Who Swedish. I am Swiss! ;-)
Is there a way to increase the sensitivity on these screens? I have to press really hard to make the buttons react. Thanks.
They use resistive technology which is not as sensitive as the capacitive used in Smartphones.
I figured out also if you require both down press and up press the sensitivity isn't as good as if you just require one and not the other. Thank you!
recently I started my project according to this video, but it didn´t work because the source of ESP32 core was updated, the problem was basically due to some double called in different folders, Temp /Arduino..., so, this video works for HardwareSerial.cpp and .h that Andreas Spiess shows in the video.
Hey, Joshua! Did you find how make it work? Im starting a project with Nextion HMI and ESP32. Hope you see this
Can you make it work with rotatory encoder with sw to change variable values and select menu pages?
I think it should be possible. But under the control of the MCU. I do not think the display itself can manage these fast changes of pins of a rotary encoder.
So it is better to have the encoder code on the SMT32F103 board.
Is it possible for you to do a nextion display sending a button data (1 or 2 or etc.) to a mcu using circuitpython?
I assume you can also use Circuitpython. Maybe you find a project to learn from?
@@AndreasSpiess Yes, I tried to use uart.write but I was unsuccessful.
Hi, what capacity is the maximum usable at the sdcard?
I do not know. But it does not matter.
I'm trying to get a NodeMCU ESP32 to talk to an Enhanced display via UART2 (16 & 17). So far, I get debug messages on the USB serial monitor right up to the point I call "sensors.begin()" to initialize the DallasTemperature.h library. After that point I just get squares and ASCII characters in the debug window and nothing changes on the Nextion. I've verified all my code is working without the Nextion command/code structures by sending all the would-be Nextion commands to Serial instead of Serial1. I've found it difficult to use the library commands (I do include Nextion.h) and typically just use Serial1.print commands to send changes to the display:
Serial1.print("topSet.txt="); // display variable to update.
Serial1.print("\""); // Since we are sending text, double quotes before and after the actual text.
Serial1.print(Tempstr); // string variable, i.e. 73.5 F
Serial1.print("\""); // Since we are sending text, double quotes before and after the actual text.
Serial1.print(0xFF);
Serial1.print(0xFF);
Serial1.print(0xFF);
In the Nextion debug window, when I type topSet.txt="73.5 F" and click Enter, it updates the virtual display.
I'm using the Nextion library of course to receive commands/updates from the display. It will be wonderful when the documentation and libraries become more user-friendly. Thanks for your time.
Does the Dallas sensor work? It seems to be an interaction between the two
Andreas Spiess I think it's a problem between Serial & Serial1 or 2. I have another board talking to a basic display and get garbage in the IDE debug window, but Serial1 (gpio16, 17) to the nextion is working fine.
While I was typing this, I changed the debug to 115200 to match the Nextion and now I'm getting my debug Serial.print() code AND the commands from the Nextion in the IDE debug window. It's as if either the .cpp, .h, or the esp32 itself is not isolating the 2 uarts. Any ideas?
Espero que la respuesta a sus preguntas no sea tarde. Intenté sin éxito seguir este video, pero tampoco funcionó. Finalmente, después de una tarde de dar vueltas y vueltas aquí está la solución:
copie el SIGUIENTE en NexUpload.cpp en la biblioteca de Nextion, esto lo sacará de la biblioteca ESPNexUpload.cpp, QUÉ FUE, se debe comentar (// # include
// # define USE_SOFTWARE_SERIAL
// # ifdef USE_SOFTWARE_SERIAL
// SoftwareSerial dbSerial (3, 2); / * RX: D3, TX: D2 * /
// # define DEBUG_SERIAL_ENABLE
// # endif)
Copie el SIGUIENTE en NexUpload.cpp en la biblioteca de Nextion
# si se define ESP8266
#include
#ifndef NEXT_RX
#define NEXT_RX 14 // Nextion RX pin | Predeterminado 14 / D5
#define NEXT_TX 12 // Nextion TX pin | Predeterminado 12 / D6
#endif
#ifndef nexSerial
SoftwareSerial softSerial (NEXT_RX, NEXT_TX);
#define nexSerial softSerial
#define nexSerialBegin (a) nexSerial.begin (a)
#endif
#elif definido ESP32
#ifndef NEXT_RX
#define NEXT_RX 16 // Nextion RX pin | Predeterminado 16
#define NEXT_TX 17 // Pin de Nextion TX | Predeterminado 17
#endif
#ifndef nexSerial
#define nexSerial Serial2
#define nexSerialBegin (a) nexSerial.begin (a, SERIAL_8N1, NEXT_RX, NEXT_TX)
#endif
#endif
Creo que debería guardar una copia del archivo original para que pueda funcionar correctamente con una tabla o mega arduino.
Espero ser de ayuda
Nextions are easy to use but they're also very expensive, 10-20 € more, which is already a lot for low-cost projects like mine.
You are right. But they seem to have quite a lot of fans...
i dont find the iteadlib_arduino_nextion on your Github.... where is it?
This is an old video. You probably have to search for newer software.
How do you compare Nexgen with FT81x series of graphics controller?
Abdul Rauf Jangda I don't know much about the FT81x but the Nextion is a human/machine interface device. It's not really for serious graphics.
I do not know which controllers they use. I just like the concept to separate the display logic from the code. It makes writing sketches faster.
Hello. I am using Arduino and trying to get HX711 scale readings into a Nextion display. It is so hard to find ANY help that I really feel like giving up on all of this stuff. Nextion has ZERO support. ALL the examples have ZERO comments in them. I don't have ANY friends that are into this and I am so tired of TRYING to find answers. Where the hell do I go??? : ( Also, Why does Nextion not support floats? Kind of sucks....
Maybe you divide your problem into several parts and solve one after the other. Then you also will find help, I am sure.
esp32 is still the wild west. missing library support is frustrating and keeps driving me back to other architectures. maybe in a few years things will improve.
I hope it will not take years ;-)
I love automation but when I think about the simplicity and energy efficiency of a mechanical switch.......
Many ways lead to Rome is a proverb here ;-)
Andreas Spiess here to :)
+Carlos Frondizi: Thank you!
If I connect RX of Nextion TFT to TX (GPIO-1) of ESP32, and also connect TX to RX (GPIO-3) of ESP32, serial communication does not work. It works with UNO3. The ESP32 WiFi chip release version is v1.0.1. Does anyone know what is causing it? If there is an example sketch, could anyone please send a link?
Search for ow to initialize Serial on the ESP32. You can use all pins, but have to tell the sketch which one you want.
@@AndreasSpiess I am grateful to you for the advice. I will do my best. There are not many engineers or hobbyists here in Japan who provide information about ESP32 or Nextion TFT in Japanese. TH-cam is a good teacher for me. What I want to do is simple, but I'm confused by the fact that many people have different information.
Genau das bruchi, ser nice! ha mer erst es esp32 board mit batterie holder psellt und scho länger es nextion bereits programmiert für de isatz als homecontroller aber ha nöd gwüsst wie. jetzt chönt me per blynk und bluetooth (hani mit iphone nonig anebracht) per phone stüre über de homecontroller!? cha mer au sensordate zrug schicke a de homecontroller mit mqtt?
Gruess
Tim
Man kann MQTT in beide Richtungen verwenden.
Espero que la respuesta a sus preguntas no sea tarde. Intenté sin éxito seguir este video, pero tampoco funcionó. Finalmente, después de una tarde de dar vueltas y vueltas aquí está la solución:
copie el SIGUIENTE en NexUpload.cpp en la biblioteca de Nextion, esto lo sacará de la biblioteca ESPNexUpload.cpp, QUÉ FUE, se debe comentar (// # include
// # define USE_SOFTWARE_SERIAL
// # ifdef USE_SOFTWARE_SERIAL
// SoftwareSerial dbSerial (3, 2); / * RX: D3, TX: D2 * /
// # define DEBUG_SERIAL_ENABLE
// # endif)
Copie el SIGUIENTE en NexUpload.cpp en la biblioteca de Nextion
# si se define ESP8266
#include
#ifndef NEXT_RX
#define NEXT_RX 14 // Nextion RX pin | Predeterminado 14 / D5
#define NEXT_TX 12 // Nextion TX pin | Predeterminado 12 / D6
#endif
#ifndef nexSerial
SoftwareSerial softSerial (NEXT_RX, NEXT_TX);
#define nexSerial softSerial
#define nexSerialBegin (a) nexSerial.begin (a)
#endif
#elif definido ESP32
#ifndef NEXT_RX
#define NEXT_RX 16 // Nextion RX pin | Predeterminado 16
#define NEXT_TX 17 // Pin de Nextion TX | Predeterminado 17
#endif
#ifndef nexSerial
#define nexSerial Serial2
#define nexSerialBegin (a) nexSerial.begin (a, SERIAL_8N1, NEXT_RX, NEXT_TX)
#endif
#endif
Creo que debería guardar una copia del archivo original para que pueda funcionar correctamente con una tabla o mega arduino.
Espero ser de ayuda
Hi Andreas, After watching this video, I tried to use serial 2 of esp32 using arduino but not successful. Can you refer any link where I can get to know more about that.
There is a video on this channel explaining Serial on ESP32
@@AndreasSpiess I followed that video but that didn't work for me. Can you guess what can be the problem.
i am also looking for same solution
Unfortunately remote debugging is nearly impossible for such cases.
I hope the answer to your questions is not late. I tried unsuccessfully to follow this video but how it did not work either. Finally after an afternoon of going around and around here is the solution:
copy the NEXT in NexUpload.cpp in the library of Nextion, this take it from the library ESPNexUpload.cpp, WHAT WAS, should be commented (// # include
// # define USE_SOFTWARE_SERIAL
// # ifdef USE_SOFTWARE_SERIAL
// SoftwareSerial dbSerial (3, 2); / * RX: D3, TX: D2 * /
// # define DEBUG_SERIAL_ENABLE
// # endif)
copy the NEXT in NexUpload.cpp in the library of Nextion
#if defined ESP8266
#include
#ifndef NEXT_RX
#define NEXT_RX 14 // Nextion RX pin | Default 14 / D5
#define NEXT_TX 12 // Nextion TX pin | Default 12 / D6
#endif
#ifndef nexSerial
SoftwareSerial softSerial(NEXT_RX, NEXT_TX);
#define nexSerial softSerial
#define nexSerialBegin(a) nexSerial.begin(a)
#endif
#elif defined ESP32
#ifndef NEXT_RX
#define NEXT_RX 16 // Nextion RX pin | Default 16
#define NEXT_TX 17 // Nextion TX pin | Default 17
#endif
#ifndef nexSerial
#define nexSerial Serial2
#define nexSerialBegin(a) nexSerial.begin(a, SERIAL_8N1, NEXT_RX, NEXT_TX)
#endif
#endif
I would believe that you should keep a copy of the original file so that it can work properly with a one or mega arduino board.
I hope to be helpful
Trying to get Nextion Editor 0.59 to install on Windows 10 but I keep getting an error window that says "WriteEXEini Error! Load RunMan Star". Anyone know what could be causing this? Did a search for the error but no information.
Maybe you go to their forum? I just installed it without any problems. Maybe you check your security software?
Used cased ESP32 What do I need to modify in NexConfig.h ? help me please I cannot use Nextion enhanced with ESP32 I just want to control LED with touch
Maybe you watch my other nextion videos
Which video Can you recommend me please
Espero que la respuesta a sus preguntas no sea tarde. Intenté sin éxito seguir este video, pero tampoco funcionó. Finalmente, después de una tarde de dar vueltas y vueltas aquí está la solución:
copie el SIGUIENTE en NexUpload.cpp en la biblioteca de Nextion, esto lo sacará de la biblioteca ESPNexUpload.cpp, QUÉ FUE, se debe comentar (// # include
// # define USE_SOFTWARE_SERIAL
// # ifdef USE_SOFTWARE_SERIAL
// SoftwareSerial dbSerial (3, 2); / * RX: D3, TX: D2 * /
// # define DEBUG_SERIAL_ENABLE
// # endif)
Copie el SIGUIENTE en NexUpload.cpp en la biblioteca de Nextion
# si se define ESP8266
#include
#ifndef NEXT_RX
#define NEXT_RX 14 // Nextion RX pin | Predeterminado 14 / D5
#define NEXT_TX 12 // Nextion TX pin | Predeterminado 12 / D6
#endif
#ifndef nexSerial
SoftwareSerial softSerial (NEXT_RX, NEXT_TX);
#define nexSerial softSerial
#define nexSerialBegin (a) nexSerial.begin (a)
#endif
#elif definido ESP32
#ifndef NEXT_RX
#define NEXT_RX 16 // Nextion RX pin | Predeterminado 16
#define NEXT_TX 17 // Pin de Nextion TX | Predeterminado 17
#endif
#ifndef nexSerial
#define nexSerial Serial2
#define nexSerialBegin (a) nexSerial.begin (a, SERIAL_8N1, NEXT_RX, NEXT_TX)
#endif
#endif
Creo que debería guardar una copia del archivo original para que pueda funcionar correctamente con una tabla o mega arduino.
Espero ser de ayuda
Hi Andreas, I am using the Keyboard.ino example, and I have made the modifications to HardwareSerial.h file, but I keep getting an error (recvRetCommandFinished err). what boggles my mind is that when I communicate with nextion display without the nextion library as per the following example, it works just fine!!!!
HardwareSerial Serial2(2);
void setup() {
Serial2.begin(9600);
Serial.begin(9600);
}
void loop() {
delay(2000);
Serial2.print("irMode.val=1");
endNextionCommand();
}
void endNextionCommand()
{
Serial2.write(0xff);
Serial2.write(0xff);
Serial2.write(0xff);
}
But when I use the library, I get the error mentioned above, and I have been trying for the past two days with no luck, pleeeeeeeease help, PS my nextion HMI code is very simple, just a variable named irMode, thats it!!!
Now you may ask, if this example works fine then why don't you use it, and my answer is: I need to get values from Nextion to ESP32 and I could not fine a clear way of doing this without a library, so please help my friend.
I think I tried to answer this somewhere else.
Hi Andreas, Yes I asked the same question on Patreon, and am glad to report that I was able to work it out on my own after I was frustrated with Nextion's technical support. basically I defined a timer in Nextion editor and I made the timer push all the values I needed through serial every 5 seconds, and the rest was just to read and process the serial in arduino.
Espero que la respuesta a sus preguntas no sea tarde. Intenté sin éxito seguir este video, pero tampoco funcionó. Finalmente, después de una tarde de dar vueltas y vueltas aquí está la solución:
copie el SIGUIENTE en NexUpload.cpp en la biblioteca de Nextion, esto lo sacará de la biblioteca ESPNexUpload.cpp, QUÉ FUE, se debe comentar (// # include
// # define USE_SOFTWARE_SERIAL
// # ifdef USE_SOFTWARE_SERIAL
// SoftwareSerial dbSerial (3, 2); / * RX: D3, TX: D2 * /
// # define DEBUG_SERIAL_ENABLE
// # endif)
Copie el SIGUIENTE en NexUpload.cpp en la biblioteca de Nextion
# si se define ESP8266
#include
#ifndef NEXT_RX
#define NEXT_RX 14 // Nextion RX pin | Predeterminado 14 / D5
#define NEXT_TX 12 // Nextion TX pin | Predeterminado 12 / D6
#endif
#ifndef nexSerial
SoftwareSerial softSerial (NEXT_RX, NEXT_TX);
#define nexSerial softSerial
#define nexSerialBegin (a) nexSerial.begin (a)
#endif
#elif definido ESP32
#ifndef NEXT_RX
#define NEXT_RX 16 // Nextion RX pin | Predeterminado 16
#define NEXT_TX 17 // Pin de Nextion TX | Predeterminado 17
#endif
#ifndef nexSerial
#define nexSerial Serial2
#define nexSerialBegin (a) nexSerial.begin (a, SERIAL_8N1, NEXT_RX, NEXT_TX)
#endif
#endif
Creo que debería guardar una copia del archivo original para que pueda funcionar correctamente con una tabla o mega arduino.
Espero ser de ayuda
Have you heard about Proculus display?
No. It seems they are not sold on AliExpress
@@AndreasSpiess I guess you are right.. I just found it on Alibaba: proculustech.en.alibaba.com/
@@mmakybh will you consider our touch screen display? then contact me
Bom dia, gostaria de uma ajuda.
Sou brasileiro, de joão pessoa pb...
Estou precisando de um touchscreen
(eDIP240-7)
Na verdade apenas a tela touch rompeu a trilha, mas, se ñ encontrar apenas a tela gostaria de uma ajuda para conseguir o modulo completo.
Maybe you find the exact type of the LCD on its PCB.
No estoy seguro que en estos días la tecnología impresione a la gente, por ejemplo todos los que vienen a mi casa se quedan muy asombrados con la barbacoa y piscina que hice al fondo de la casa y no le dan mayor importancia a mi datacenter o automatismos..
Good point. Probably depends on you friends...
It will be nice if you increase fonts size while explaining?
This is an old video...
@@AndreasSpiess
But make sure rest all other n NEW videos should depict large fonts su users can understand more details and follow screen reading clearly
My IDE reports nearly a dozen Invalid libraries after I cloned your Git to my libraries directory.
Edit: ok, it was the Nextion-Enhanced folder causing the problem. I copied all it's files to the similar named folder in your examples directory and deleted the duplicate. I'll blame it on Git for not dropping the files in my folder correctly. :)
Maybe my structure is not right. I do not remember.
In this way, can I use it with Nextion basic
I do not understand your question
I mean Nextion the basic version like NX3224T024_011 but you can make video tutorial to use Nextion Enhanced with ESP32 send information such as opening the LED with the touch please
Input, output, shake it all aboutput :p
:-)
I love you sir. One day I will come to kiss your hands
Glad you like the content of the channel
@@AndreasSpiess you are making best content. Your videos are very easy and brief for learners like us.
Hi Andreas,
I can't get the time to display.
Here is what I am seeing on the serial monitor.
I'm using an ESP32 and a 2.4" Nextion display.
[1073492688:0,1,b0]
b0PopCallback
ptr = 1073492688
recvRetNumber :536873131
recvRetNumber :0
recvRetNumber :0
recvRetNumber :134273857
recvRetNumber :134273857
recvRetNumber :553648128
recvRetNumber :2164260864
Y131/00/00 ⸮7:⸮7:⸮8 0
recvRetCommandFinished err
0
Thanks,
Keith
I cannot do a remote analysis. Maybe you start with a simple example and extend it till it works.
Great video, unfortunately i can't upload the code , if i comment the , it can be uploaded.
Need help pls , thanks
I share my knowledge on TH-cam and unfortunately cannot do consulting :-(
Hi Andreas
Very usefull video thank you. My project works from the Pi toward the Nextion.
Can you help me tell the screen to got to page1 or page 2 with a serial port.write() command?
Port is setup import serial, port = serial.Serial("/dev/ttyS0",baudrate = 9600,timeout=1)
Thank you much in advance.
David
This is a old video and I do no more know the details. Maybe Google knows?
What's wrong with your printer? Maybe we can help.
I also do not know. It sometimes stops moving in the middle of printing.
Hi Andreas, Thanks for your Nextion videos, they have really helped me start my project. Were you able to find ways/code to use the expansion board buttons as inputs? I am working on a motorcycle VCU ( th-cam.com/video/ixrIBekt090/w-d-xo.html ) and am trying to figure out how to read the button presses. Do you know if there is a way to get a "Touch Press event/Touch Release Event" for the GPIO's? Cheers!
I think you should get information from their homepage. I never tried.
@@AndreasSpiess Thanks, I was having trouble decoding the Nextion instructions, but I came across another video that helped me understand. I thought I would post the solution here so you and others have access to it. Hopefully, this helps someone looking for the same information.
You have to configure the GPIO expansion board button in the 'pre-initialize event' area of the page you want to use it. This will link it to a button, element or hotspot on the page so you can use the 'touch press event' and 'touch release event' of the onscreen element by pressing or releasing the linked expansion board button.
A code example is: cfgpio 4,1,m0 This means: (cgfpio=configure gpio port)(4=expansion button 104)(1=attach to screen element)(m0 = hotspot id "m0").
Now I can use the button 104 on the expansion board to activate the hotspot m0 on the page. You can link any expansion button to any onscreen element. cfgpio 2,1,n3 will link button 102 to Number field n3 on the page. You have to configure the buttons on each page, but this means you can use the buttons for different functions on different pages.
If you are configuring an output for the beeper or led, you seem to be able to do that on the page 0 'pre-initialize event' ( cfgpio 7,2,0 ) = (port 7 beeper)(2=binary output 1 or 0)(0=do not link to a component) and call it using pio7=1 or pio7=0 from any page.
Thanks again for your great videos!
$100USD if you can do a vid on AWS IoT and ESP32 MQTT.
Not because of the money, but AWS is on my list. ESP32 MQTT is already done in one of my last videos.
yep, watched the MQTT vids. ESP32 means we should have TLS1.2, but AWS IOT MQTT is more difficult because it requires x509 authentication. I've been banging my head against it.
aaaand they released "Amazon MQ" today, which uses Apache MQ, which talks MQTT. That should be much easier to connect than AWS IOT, and also gets rid of the overhead ("device shadow", etc).
I will have a look at it. Thanks.
This is too far out of date no longer relevant. Library zip file wont install. No espressiff folder in a hardware folder. No idea what PubSub (standard) is. Might have been good info once but no good any more.
Unfortunately I cannot support all my 350 videos :-(
Realize that that is why I posted this message to help others. Cheers
You haven't mastered anything. This is the basics to the nextion screen. The screen text is over exaggerated.
???
@@AndreasSpiess The title in the thumbnail. It says mastering the screen. It's a bit click baitey. Don't get me wrong, it is a great intermediate tutorial, but it doesn't come close to mastery. As an engineer these concepts are extremely important to me. That M3, while a bit out dated, it's a nice little processor. It is far more capable than the Chinese could make it on this screen. Mastery topics would explore that chip, take it over, and make the screen run semi decently.
Just a heads up for Nextion display users.
DUMP THE LIBRARIES! LOL
Yes, you DO NOT need their horrible, bloated libraries to use the Nextion displays!
I was working on a project and besides finding their syntaxes awkward, I found that the code and their libraries just sucked up LOTS of memory in the Arduino. I reached 75% of memory used with a small sketch and of course, ran into the known bugs and instability that the Arduino boards have when that much memory is used.
I searched and searched for "tiny" libraries, but non were found.
Then, just by good luck, I found a channel on TH-cam that actually shows you how to use the Nextion displays... FULLY...
WITHOUT LIBRARIES!
At first, I thought that this was impossible to be able to do all that I wanted to do. Surely, I must NEED the libraries.....
but... NOPE, I did not. I was able to write all my code and still has lots of memory left over for feature additions.
I highly recommend searching youtube for:
"Using Nextion without libraries" _(without the quotes)_
and you should find CC's tutorials. Look for the "E" in a lime green circle.
There are a lot of videos showing how to do everything with the Nextion display, without libraries... EVERYTHING.
As an aside, one other nice thing that I discovered too, is that my code seems to run much faster now too, since it's not lagged by access library calls. Things are so "snappy" now too.
I just thought that I'm mention this, since this method could really be used with any kind of controller board that supports serial.
P.S. I also use a baud rate of 115200 without any issue.
Hope this helps.
Thank you for the info. Very interesting!