Ironbull 40' Air ride, lift axle, hydraulic dovetail
ฝัง
- เผยแพร่เมื่อ 19 พ.ค. 2019
- 2019 Ironbull gooseneck trailer walk around.
30k GVWR
GET-Y HITCH
BLACKWOOD LUMBER
17.5 WHEELS
16 PLY TIRES
40' LONG
HYDRAULIC DOVE TAIL
AIR RIDE
LIFT AXLE
HOT SHOT SETUP - ยานยนต์และพาหนะ
I’m in the market, and this is the best I’ve seen. Thanks for sharing
thats a very professional setup. I like seeing the hotshot world looking good.
Sweet looking trailer...nice that it has air assist axles & ramp, compressor and wench. Yes, I would like to see the wiring on it. Those are some heavy tandems. Thanks!🤩
Thanks for this detailed video ChassisBlack73. That is about the nicest and well equipped hot shot trailer I've seen, you really added some critically important options to hot shot effectively. There's a lot of crap out there and this very well-done video exemplifies just how high-quality Iron Bull (norstar) is. They should give you a commission CB73! Good choice on adding the Gen-Y coupler too, easier on you and the truck. Keep the good material coming ChassisBlack, much appreciated!
Thank you
Nice trailer. I have a LoadTrail 40 ft. I have had a lot of trouble with the condensation freezing up north. I got a air dryer filter from tractor supply and place it right in front of the compressor in the air line before it exits the toolbox and I have no problems going-0 degree weather. Also my hydraulic dove tail I have to push a leaver to make it unlock to go down. Thanks I like it.
Thanks for showing. I will never own a rig like this, but it's nice understanding what's out there better.
That’s a sweet Trailer. I love the attention to detail that they put into your trailer.
Thank you. Yes they did well. I'll be having an update video soon to go over the good and bad after 10k miles
@@THUNDERstroke73 try this, raise the front of the trailer befor lowering the ramp, that will lesson the high center point.
Very impressive gooseneck trailer, you should be proud of that fine trailer,powder coat paint looks great
Thank you
Bro that’s a Cadillac trailer.... dope!!!
You can use the compressor to put air into the tires. Fantastic trailer. Just love the dual wheel setup. Trailer is built to haul serious loads.
nice! I'd love to get into hauling someday! Love your shop too
Very fancy trailer you got there! I want to build a flatbed from scratch, I now have some idea's of what I want to do. Nothing too fancy it's a stripped down camper frame right now. The axles aren't much but the frame itself is made of massive I-beams which should hold a lot of weight.
That's awesome
Very nice trailer! May have to borrow a few of those niceties / ideas like the chain hooks and add them to my own gooseneck.
Hell ya man
Do an update in 5 years on how the trailer is holding up and how warranty was handled by the manufacture.
Awesome looking trailer! Hope it works flawless for you
So far 2300 miles and doing well!! Thanks!!
@@THUNDERstroke73 if u dont mind me asking how u get passed dot inspection with your front side windowd tinted like that? I want mine tinted like that... can u share some insight on that?
@@THUNDERstroke73 how much u avg a week bring home ?
This reminds me of a diamond c trailer with some of the ways it’s built.
thx for this walkaround!
That is a beautiful trailer!
Great piece of equipment. That dovetail; never seen one however it gives you an advantage to load different items and also was thinking the same thing in regards to load angle- adding some additional ramps to compensate for the pitch angle would be nice if they were able to lock into that ramp via some locking pins to prevent them from dancing when loading and unloading with just one person.
Ya I built some additional ramps for cars and what not that elevate the tail 14 inches higher and drastically decreases the angle
That trailer is bad ass brother. 👍👍
I made a previous comment, but you mentioned the lift axle, and kind of what I was wondering, why don't they let you choose front or rear lift axle. Tight driveways and turnarounds would be easier if the rear axle was lifted, shorter wheelbase, just watch for tail swing. The other thing I was wondering , does the Gen Y hitch fight with the air ride trailer, or counteract?
Nice trailer im looking at getting a gooseneck trailer for my excavator !
THAT GREAT TRAILER
THANK YOU DETAIL VIDEO
FROM AUSTRALIA
You're welcome mate
Great trailer. To make money you got to have the best.
Chicken is the pet that poops breakfast. Awesome trailer by the way
Would it interest you to be able to add hydraulic gooseneck jacks that run off of the hydraulic dovetail's power unit?
That'll be the one. Nice Trailer. Good Video.
Thanks man
Awesome trailer!
Thank you
I assume to help the load angle you can air down the suspension first.
That's one sweet trailer!
Thanks man
VERY nice trailer👍👍👍🇺🇸🇺🇸🇺🇸
Also check ur anchor screws for the hardware in the toolbox they will rattle loose and tear up some stuff. After 1.5 years if u run in the salt u need to change the caliper orings and anti rattle springs if u don’t they will just loose and fall on ur rotor if u have disc brakes. If not ur good. Thanks again
Really Really nice 👌, great job
Sweet trailer!
I knew I saw an orange Jeepster Commando! I had a 69 Jeepster Commando, that damn thing was unstoppable! Oh, nice trailer too.
Nice trailer bro. The only thing I would change is only having the rubber floor in the middle of the deck only to allow pallets to slide when loading but still have the resistance to secure it from sliding in transit. This trailer looks like you’ll get plenty of work out of it💯
Thank you
I haven’t seen the option to only do the rubber in the middle. Is that an option?
Bird Gunter yep they do it how ever you ask 👍🏽
Can you please show where solar panels are for charging, will batteries also charge while in transit off of truck? Also can you please tell us about the air compressor and storage tank for air ride? Also, let's say that you are are going to load a car....you get front wheels on the main deck, can you lift rest of car with the hydraulic dove tail? How much weight can you put on the dove tail when it is up in lock position? Nice truck and trailer. Thanks for the video, keep the videos coming. God Bless you and your family
Hello, how much did your trailer cost you? Would you suggest it for non CDL hauling considering the Limit combination weights?
I really like your whole setup, both the truck and the trailer. Please, how much did the setup cost you as it is?
Does it have electric over hydraulic brakes? If so, I think they must be drum rather than disk. I think 12000 lb. is as large as you can go with disk. Thanks. Nice trailer!
Ok in SC what brand trailer, what type Teailer? What length trailer? What options, opinions & tips would you recommend ? I have CDL :)
58 years Young,
Every weekend home 🏠
Or every other day
that Will be helpful what’s your experience :) thanks 🙏
Nice setup I think I would want the lift axel to be the rear axel make it a shorter turn radius
great video
Nice!! Hopefully I can afford one!
pretty nice rig
Did u buy those strap hookups or does it come with the trailer
Now that’s it’s been a year, how that rubber on the deck doing?
Please can some one use this to haul excavator ....mid size excavator ... And how ton is this ?
Hey on the metal on deck put grip tape it comes in 3inch wide an uptown 6inch so its not slippery
That trailer is absolutely perfect, love the lifting axel!!!!
How much was that set up?
25k
I wondered what the list price on that identical trailer is
I aint no Trail King but for a home made trailer and 12v electric hydraulics not bad
That trailer super nice. Only if u had a Dodge pulling it. Lol
Nice big tool box
Nice video and trailer what's the cost on one like that
Awesome trailer man. U must be having chicken for dinner. Lol
Hahahaha oh ya
Looks like a very well built trailer. How much retail???
If you dump your suspension you can get the load angle even lower
I want one just like yours!
Thanks man
Good video. Thanks
How much does it weigh ? Sweet trailer
Wanna buy the 5th wheel built for that truck I have a new one with harnesses
How long is the bed and dovetail itself? Assume 40' length includes the gooseneck? Thx
Deck total is 40 feet over all. Dove is 9
Very nice
What’s the payload as is?
So you need a CDL for your truck and trailer, also they should have lift axles on both wheels this way you can have even tire wear.
Now that's Funny...lift both axials you would have Full Air Ride and Fuel economy would be Great.👍
I also asked in another video, do you have issues with the trailer bearing weight on the dovetail? I can't find info on any hydraulic dovetail for weight bearing beyond center.
Hello God bless you. Where can I buy 40’ for hotshot.?
Does air compressor have outlet for air hose hookup for air ratchet and air jack.
Good question
Great video homie I was wondering if you could hauled cars on your trailer
I could if there was a loading dock. Definitely can't drive a car up the ramp naturally. Too steep
What was the price of your unit?
Cool where did you get it at
Two questions, (thanks in advance for your reply)
1, What does your trailer weigh with required equipment (chains etc.)
2, How frequently do you have to pass on a load due to it being too heavy ?
12000lbs
I never pass on anything that's less then 19000lbs
ChassisBlack73 thanks!!!
Would you help out with the online info for your trailer? Looking to buy a new trailer. Debating on builders, might go with a diamond c trailer. Thank you
Diamond C is overpriced and not as perfect as they advertise themselves to be. Still a great manufacturer, just don't be dooped into the marketing. Mine was orders through MW Equipment in Sterling Colorado. The manufacturer is Norstar. Ironbull is the trailer division
I want a video of the commando, lol!
If you don’t mind me asking but where in Texas did you special order your Ironbull trailer? Thanks
I ordered it from MW Equipment in Sterling, Colorado
@@THUNDERstroke73 thank you that’s a very nice trailer worth every penny
How much does it weigh
That's a nice trl
Really nice trailer.. I'd like to see how the air bag system works. I figure the aft axle has 2 bags, but the forward axle must have 4. 2 for ride and two for lift, right???
That's correct
Can you dump all the air to make the deck lower?
@@peteholloway7988 yes
whats the weight of the trailer
Good video... So what can you put on the deck? 30k? Maybe if you had a different truck?
19k is max
Beautiful trailer man, good for you! What’s the unloaded weight on it?
12k
Didn't notice a suspension dump valve. You always want to dump the bags before unloading. It will prolong the life of your bags. You don't want them fully extending everytime you unload. Also take that jack out of the box or secure it. Wouldnt want it sliding into your valves or compressor.
Agreed
Does Iron Bull have a website where you can check out all their options or is this something you have to do at a dealership? I didn’t see a website, apologize if I just missed it.
Try this thing called "Google", it works.
www.norstarcompany.com/
Were can I get one to buy?
very nice trailer. what is the purpose of the torque tube. i never seen that before
Prevent trailer twist. Especially when turning
I bought a 32 Feet trailer like you a PJ and was was taking to the thumb area of Michigan and was pulled over and given a Ticket for not having the correct CDL license rating. I have a regular Chauffeurs license but apparently i have to have CDL-A license a Misdemeanor ticket, one time with nothing on it because the GVRW is 25000 lbs. so i am trading it off for a tag trailer so the dump trucks can haul the small equipment, its sad when they give a ticket for weight thats not on there but might be on there so to that they can shove it all they did was cost michigan money in tax revenues because we are done with it.
Might want to put some gasket around that tool box lid.
And a light. If you need a light in the shop for filming, you definitely need one on a rainy night trying to load up.
Perfect
Nice trailer, how much $ ?
Figured with that size trailer you'd be using an F450? Great looking setup.
Numbers wise a man is crazy to buy a 450.. both trucks have the same gvwr and similar gcwr and the insurance and tag fees are much higher on a 450
Except you get way better brakes with the 450
I can't believe how many people "watched" the video then wrote a bunch of dumb questions that "if" they had seen the video they would know the answers to them, either that or people are just clueless and have no idea what they just saw.
How’s it working out for you so far I like their trailers
So far it's good. The air ride is nice but I'd probably go with hutch suspension next time.
Would you mind sharing how much such trailer would cost? And how long did you have to wait?
He said $25k and 3 months
Are you still pulling THIS trailer , and would you do a 2 year review on IT and your truck ?
I am not. I'll tell you Ironbull is good but don't get air ride. Get torsion suspension instead. And don't waste time with a hydraulic tail. For the truck I highly recommend the Ford 6.7. But don't get anything more then an XLT. Save the money. That's my best advice for ya.
@@THUNDERstroke73 Thank you ! Appreciate your reply !
One question if you don't mind
Which kind of brakes do you have on your axles?
Electric drums
Electric Over Hydraulic Disc would be the best way to go. Lighter Weight and less breakdowns
Great looking trailer.. I was looking at that 15k axle configuration over @ Maxxd & Diamond C. I opted for 40k Maxxd trailer with monster ramps. I don't use my rsmps that often,but i still want a hydraulic dove. Why did you go with the northstar trailer?
My dealer sells Maxxd as well, so I debated between the 2 for awhile. But I went with them because I had owned one before this one and liked it. Also because I liked the design of the hydraulic dovetail. Not a flawless trailer but does well so far
I really liked the Maxxd. I felt Diamond C was overpriced compared to others
Curious if you're over the 65' length limit of truck & trailer with that Ford F-350 and a 40' gooseneck?
67 feet bumper to dovetail
@@THUNDERstroke73 so your over the legal length
@@jenniferbenham9904 Yes but screw em
@@THUNDERstroke73 that's a sweet ass trailer. How's it holding up?
You said that you wouldn’t have air ride again. Is there any certain reason why?
Thanks.
Extra cost mostly. If your compressor fails or a bag fails, you're dead in the water. Hutch suspension is what I would recommend
if you could dump the air suspension, you could get that angle lower...
and with that hydraulic pump, you should have hydraulic jacks....
Nah I don't like hydraulic Jack's. I've had trouble with them before and don't like the cost