Company: *spends thousands of dollars on high quality demonstration video, including well designed graphics and thoughtful, clear voiceover* CEO: Yeah, but is it metal enough?! Company: Its an educational video... CEO: Add a sick guitar shred from the 90s. But it has to be free.
For the record, some people saying they didn't explain the way it changes direction, you're partially right, they didn't tell us what it has to do and why it works, but they did briefly show it at around 1:15, the head stopped spinning and just went upwards.
According to some research (I was wondering the same thing) I believe it turns by applying the small correction maneuvers it showed over a given distance to get a specific curve - I think it does this by pumping the mud fluid stuff in a specific direction. Regardless, however it makes its correction maneuvers is how it turns. And I believe each section of the drill has elbow type joints that allow it to bend. Again, not an expert, just what I gleaned from reading a few things
Brian Patton if you look carefully the drill head has a slanted angle at about a 45 degree angle. by rotating the drill string to the desired degree and then pushing instead of rotating, steering is achieved. for example, rotating the drill string to the 12 o'clock position and pushing will force the head straight up, of pushing at 3 o'clock will turn it right. in this way, it is steered.
"it does not matter if the bore is executed in Siberia at minus 40 degrees Celsius or at plus 40 degrees Celsius" or through a woman's skull and spine in a 6th century graveyard.
+Ken Saba immidiatly behind the cutter from the pilot drill there is this bent sub in the pipe which can rotate (with hydraulic pressure) to change direction of the cutter
in that one you can see it has a wedge on the cutting head so if they want to go left they stop the drill rotation so that the wedge is on the right and push the rod in pushing it to the left.
This is so interesting. Also really great graphic animation whoever helped make this. I came here from a Reddit post and now im wanting to become a Horizontal Driller. (I'm sure there's a real name for it)
Like routing a flexible surgical catheter during flouroscopy into any part of the body without open surgery. Pretty soon, this will all be done by robots. People only have to be called in to do open surgical intervention.
I had an experience to use the method over 3.4 kms. This is only useful for crossing river or structure. My project was for waste water pipe line network. The staffs who use the method in Vietnam promised it's really good method for network pipeline in soft ground. They advertised it proudly. However, Manhole installation must be matched with it. They expressed that Manhole installation would be carried out by Top Down method not Open Cut method. Eventually they ended up to carry out open cut. They hadn't any experience the manhole work. They took some money for pipe installation and gave up all the remaining works. I was really disappointed their attitude.
umer shafi if you look carefully the drill head has a slanted angle at about a 45 degree angle. by rotating the drill string to the desired degree and then pushing instead of rotating, steering is achieved. for example, rotating the drill string to the 12 o'clock position and pushing will force the head straight up, of pushing at 3 o'clock will turn it right. in this way, it is steered.
Pulling had to be temporarily stopped due to rig breakdown. Exit side( pipe side) is bank of pond and now it is raining heavily at the site. Water level increased up to hole level. Since rig side level is lower than pipe side level, water is flowing through hole from pond to rig side.Can you suggest any technique to temporarily plug the hole to prevent water seepage from pipe side to rig side.
the example shown of road crossing usually will have UG Utilities like water main, Sewer and storm water lines how do U manage those interfaces would be interesting to know
It's incomplete video drilling middle portion are not shown properly during drilling time drill is moving downward and suddenly getting upward direction
babilabub if you look carefully the drill head has a slanted angle at about a 45 degree angle. by rotating the drill string to the desired degree and then pushing instead of rotating, steering is achieved. for example, rotating the drill string to the 12 o'clock position and pushing will force the head straight up, of pushing at 3 o'clock will turn it right. in this way, it is steered.
That was a cool "half a million $$ animated bore". That's what they do when MILLION $$ MACHINERY'S involved,, the real bore is up your bumhole in the exorbitant pricing of what they charge doing everything ultra expensive technology now performs. Wanna be rich? Simply come up with an idea,, label it the best thing since sliced bread & sell it to contractors who don't mind passing that exorbitant & dubious cost along to people in real need of services! I need a paltry 7 40' 2" bores performed under a road 3' deep for electrical utilities & I'm getting pricing of $4k/bore,, a cool $28 grand for a day's work (less piping)! You can't beat modern technology,, the ruination of real men doing real man's work yet the easier it gets,, THE MORE DAMNED EXPENSIVE IT GETS!! Go figure,, right??
Company: *spends thousands of dollars on high quality demonstration video, including well designed graphics and thoughtful, clear voiceover*
CEO: Yeah, but is it metal enough?!
Company: Its an educational video...
CEO: Add a sick guitar shred from the 90s. But it has to be free.
For the record, some people saying they didn't explain the way it changes direction, you're partially right, they didn't tell us what it has to do and why it works, but they did briefly show it at around 1:15, the head stopped spinning and just went upwards.
Ic thanke thee!
not enough explanations on some parts of the drilling - how does the drill makes turns? All you showed was the straight lines
....
According to some research (I was wondering the same thing) I believe it turns by applying the small correction maneuvers it showed over a given distance to get a specific curve - I think it does this by pumping the mud fluid stuff in a specific direction. Regardless, however it makes its correction maneuvers is how it turns. And I believe each section of the drill has elbow type joints that allow it to bend. Again, not an expert, just what I gleaned from reading a few things
How horizontal drilling works . You didn't explain the most sophisticated part. How the drill head navigates using the steel rods..
Brian Patton if you look carefully the drill head has a slanted angle at about a 45 degree angle. by rotating the drill string to the desired degree and then pushing instead of rotating, steering is achieved. for example, rotating the drill string to the 12 o'clock position and pushing will force the head straight up, of pushing at 3 o'clock will turn it right. in this way, it is steered.
How can you push it if it is drilling into rock ? Possibly it rotates through a limited arc ?
@@das250250 I suppos it is partly pushing and drilling
@@das250250 this type of horizontal drilling wont work in bedrock
"it
does not matter if the bore is executed
in Siberia at minus 40 degrees Celsius
or at plus 40 degrees Celsius" or through a woman's skull and spine in a 6th century graveyard.
Very interesting but not well explained: "the drill is called back on course". How it changes direction?
+Ken Saba immidiatly behind the cutter from the pilot drill there is this bent sub in the pipe which can rotate (with hydraulic pressure) to change direction of the cutter
in that one you can see it has a wedge on the cutting head so if they want to go left they stop the drill rotation so that the wedge is on the right and push the rod in pushing it to the left.
true true.. it only show the entry point and the exit.. sucks
This is so interesting. Also really great graphic animation whoever helped make this. I came here from a Reddit post and now im wanting to become a Horizontal Driller. (I'm sure there's a real name for it)
The Reddit post about the gas cable being drilled through a 6th century woman’s skeleton?
They are just outside my house right now. It's fascinating and you'd hardly know they are there.
Like routing a flexible surgical catheter during flouroscopy into any part of the body without open surgery. Pretty soon, this will all be done by robots. People only have to be called in to do open surgical intervention.
I had an experience to use the method over 3.4 kms. This is only useful for crossing river or structure. My project was for waste water pipe line network. The staffs who use the method in Vietnam promised it's really good method for network pipeline in soft ground. They advertised it proudly. However, Manhole installation must be matched with it. They expressed that Manhole installation would be carried out by Top Down method not Open Cut method. Eventually they ended up to carry out open cut. They hadn't any experience the manhole work. They took some money for pipe installation and gave up all the remaining works. I was really disappointed their attitude.
how does the pilot changes direction and how the huge and heavy rods change its direction on curves .....confusion
umer shafi if you look carefully the drill head has a slanted angle at about a 45 degree angle. by rotating the drill string to the desired degree and then pushing instead of rotating, steering is achieved. for example, rotating the drill string to the 12 o'clock position and pushing will force the head straight up, of pushing at 3 o'clock will turn it right. in this way, it is steered.
but the rod is straight steel .. how did it bend ?
@@encikpewang4828 because its flexible and the joints arent perfect
Redditors use this to drill holes in the skull of ancient skeletons
Pulling had to be temporarily stopped due to rig breakdown. Exit side( pipe side) is bank of pond and now it is raining heavily at the site. Water level increased up to hole level. Since rig side level is lower than pipe side level, water is flowing through hole from pond to rig side.Can you suggest any technique to temporarily plug the hole to prevent water seepage from pipe side to rig side.
In relation to the drilling speed, the boat may be slow.
But how going the underground in turn down to upper side?
We do allot of animations just like this!
Nice job, ignore the haters.
the example shown of road crossing usually will have UG Utilities like water main, Sewer and storm water lines how do U manage those interfaces would be interesting to know
go under them all
Hi, excellent animation! Is it free to use in presentations for a civil project?
It's incomplete video drilling middle portion are not shown properly during drilling time drill is moving downward and suddenly getting upward direction
Don't get is it thing has flexible joints?
The bend radius is great enough that even rigid tooling has flex
That was a fast boat.
Very informative.Are the drill rods flexible to make a, say, an arc shaped hole? How do they drill the exact route required?
babilabub if you look carefully the drill head has a slanted angle at about a 45 degree angle. by rotating the drill string to the desired degree and then pushing instead of rotating, steering is achieved. for example, rotating the drill string to the 12 o'clock position and pushing will force the head straight up, of pushing at 3 o'clock will turn it right. in this way, it is steered.
Well explained. 👍
Anyone knows how much this machine will cost?
Thanks
How about stones in the ground ?
Meelis Lond change your drill head type and you're in the game
เยี่ยม มากก๊าก ครับ
Plase make a video on how an indian bore well dril
so interesting
and explain it that can easly undestened by my son🙏🙏🙏🙏🙏
Tư vấn mua máy khoan định hướng HDD
super technique
I need sem mshen
Well hot damn.
Failed to explain how they bend the pipe to make a curve. Thumbs down. Poor video.
That was a cool "half a million $$ animated bore". That's what they do when MILLION $$ MACHINERY'S involved,, the real bore is up your bumhole in the exorbitant pricing of what they charge doing everything ultra expensive technology now performs.
Wanna be rich? Simply come up with an idea,, label it the best thing since sliced bread & sell it to contractors who don't mind passing that exorbitant & dubious cost along to people in real need of services!
I need a paltry 7 40' 2" bores performed under a road 3' deep for electrical utilities & I'm getting pricing of $4k/bore,, a cool $28 grand for a day's work (less piping)!
You can't beat modern technology,, the ruination of real men doing real man's work yet the easier it gets,, THE MORE DAMNED EXPENSIVE IT GETS!!
Go figure,, right??