ฝัง
- เผยแพร่เมื่อ 16 ก.ย. 2015
- ~SCROLL DOWN FOR ENGLISH~
Met behulp van haar nieuwe machine trekt aannemer Van Vulpen in een krappe twee uur tijd een HDPE kunststof hoofdriool aan de Blokmergouw te Hoorn. Lengte: 220 meter, Diameter: 1100mm
Met behulp van sleufloze technieken is het mogelijk om leidingen met een diversiteit aan leidingdiameters onder spoorbanen, (rijks)wegen en vaargeulen aan te brengen, waarbij de bovengrondse overlast wordt geminimaliseerd.
www.vanvulpen.eu/nl/nl/1/home....
ooms.nl/
Age and leaks required this important pipeline to be replaced. The project required as little digging as possible, it is therefore that the state of the art trenchless HDD technology came into play. The pulled in segment shown in this footage is a 220meter (or 722feet) long, 1100mm (or 43,3inch) diameter high-density polyethylene (HDPE) fused pipe using horizontal directional drilling (HDD) and pulling. Yet another succesful pull, completed in just two hours.
Egeplast, Van Vulpen, gestuurde boring, kunststof rioolbuis trekken, Hoorn, Ooms, Prime drilling, HDPE, spiegellas, welding, weld, lassen, a high-density polyethylene, trenchless technology, civiel, aannemer, damwand, hoogheemraadschap, afvalwaterakkoord, Oostergouw, Blokmergouw, Ooms Construction, persleiding, persriool, fusion weld, riool, rioolwater, graafmachine, excavator - วิทยาศาสตร์และเทคโนโลยี
Probably the best directional boring video I have seen, and it is big pipe to boot!
Cool, didn’t know they bored and pulled back on pipe this big. Only ever seen this done for a couple of 4” comm ducts or gas pipes. Great vid.
Thanks for taking the time to convert.
I honestly had no idea it was that big of a gap.
Good job, Thank you for your information.
Thanks for the clip good brief of horizontal
I didn’t even know that sort of thing was possible, mind blown!
Brilliant engineering - preserving the streetscape and reducing traffic disruption. 😃👌👌👏👏👏
You're right about that but you're never going to win people get upset with 10 seconds hold up may as well dig a dam and fill it back in with the pipe
😎
Interesting work nice set up
That's pretty awesome!
Awesome work guys!
I love Dutch marine- and civil engineering!
How big was the pilot hole for the 36 in pipe? 6 inch?
The info. On this video states this is a 722 ft long 43.3 diameter high density polyethylene fused pipe. And pulling of the pipe back through the trench took only 2hrs. The drilling , I would think took half a day maybe longer. Impressive, would love to own this equipment. Thanks
Drilling takes a bit longer, a series of smaller rheemers were pulled first , scaling up to meet the 44” pipe size
We have a requirement for this, to pull 800mm sdr21 pe100 gas main. Any suggestions about who could carryout this work for us
Many Thanks
I am very happy with this job.. I have worked for 10 years in this horizontal directional drilling hdd drilling company.. I am a general worker.. I really understand what I have to do when I work... from starting to prepare things, to complete equipment work work, and so on.. i really hope you put me in your company for work sir i used to work in malaysia 10 years in this machine work my name is irvan from indonesia i migrated to malaysia this project work 11 years and 10 years working in the field this pipe machine,,, sir, I work in your company, thank you very much
Does lateral compression of the soil ever jeopardize road surfaces or adjacent underground utilities?
Very good ! How do you de-water or keep the pipe from floating ?
And bentoniet
this is clearly a pump fed line, any directional bore is either forced or water main due to the drills dependency on riding the rock or bouncing off large infractions
In my city, they usually just open up the road. There's rock outcropping all over the place, it's typical to have a rock hammer laying around on construction sites. Recently, they needed to have a pair of pipes go under an active railway. Bedrock at that location is quite literally right under the asphalt. They dug a pit, set a horizontal drilling rig and pushed a steel pipe with tooth straight through the rock.
Awsome job Guys.
I'm a HDPE pipe welder. I have 3 certificate now I'm work in UAE I proud of my work🥰
Hi imran, that's good to know. I work as project engineer in HDPE piping projects in mumbai
Do you not have to de-water before insertion?
Nice work👍👍👍
EXCELLENT vid ✔️
Thanks, John :)
Fent
that looks harder than drilling a vertical well.
👌good vid
Civil engineer here in the pipeline industry.
It can be harder in some instances due to the lack of solid Rock, loss of pressure (frak out) is pretty common and losing the hold behind the cutting head is a pretty real problem in clay heavy soils but generally it's pretty easy. Drilling.this is the pull back ohase which can't have complications but is for the most part easy.
great video, nicely done.
wow amazing. Pipe bursting in action! 700+ pipe , wow. I'd assume these come in sections and you fuse them on site?
Good job guys.
No idea why TH-cam recommended tugging a poopoo pipe video to me.. but ok fine I'll watch it
@ 3:48, I'm glad to see they protect their tree's. Here in the states they would have cleared a 300' wide swath on either side to pull that pipe in.
No we wouldn't have. Just factually we wouldn't destroy that much tree for temporary work space cause we'd be required to fix it.
And also I was litterally just on a job were we pulled a pipe and had to set up plywood to protect the trees.
Truth be told... it totally depends on the location.
I always laughed about the ground rollers when ur pulling the pipe thru the ground!!
Courtney Shoemaker keeps from tearing up the grass/sidewalk/anything on the surface
@@mjdegn and damaging the pipe! the pipe in the hole is being lubricated by the slurry mix!
Any reduction in drag you can get is good.... especially when pulling miles of pipe.
Is also necessary to not bend the pipe permanently.
I love it! My crew is doing this tonight, only with 300’ of 8” HDPE. We subcontract the boring/pipe pulling. I’ve never seen it done. And our start/finish “trenches are 15’ deep (at least) and 20’ long, with shoring boxes in them. I’m curious how they can bore so accurately (gravity fed sewer line) and how they’ll pull the pipe through given the depth and shortness of the trenches. Company working from 9pm to 5 am since this job is on a busy highway and a lane must be closed. I have to cover the other work we do during the day, which is why I’m not there. Dammit I’m curious.
This became a pretty common thing here, there's no bedrock in my country so that makes it easier. Where are you at?
@@BBQHoorn Southern California.
@@spidermight8054 I do horizontal drilling what company are you because I drill in all of Southern California also you have a very big pit honestly and the ground is good in some parts to be very precise with depths
Pipe is butt fused and done with directinal drilling. Done it many times in the uk.
Are pipe levels controlled؟
I've seen this done on a much smaller scale (smaller pipe) running a new sewer pipe into someone's house. Kinda interesting.
Good job sar
So what happens after?
Now that is some massive power.
Вот сразу видно все как у людей , есть чем помыть , кран стоит и штанги руками снимать не надо , ПРОСТО БРАВО !!!!!
А где-то иначе? Я вот не видел ни разу, чтоб штанги руками пердолили, обычно штабель тут же рядом с машиной укладывается автоматом. Единственное что меня улыбнуло, так рабочий с чинариком в зубах моет из шланга штанги. Все как у нас, и бурильщик поди в шлепанцах.))) Да, и колеса авто при выезде на дороги со стрйплощадки, у нас уже давно и почти везде моют. Ибо пи..дюков можно выхватить на раз два.
Hi,
Thanks for sharing video.
I want to know how sewer will flow through the HDPE pipe?
1. Gravitational flow (sewer flow as a result of difference between height)
2. Pressurized flow (by pumps as a result of pressure differece)
Regards
+Zaman HASANOV #2, pumps.
How many pumps are there actually? How many are necessary for let's say 1 kilometer?
Hi, thanks for watching. To answer your question ... I believe there's just one. I was just an observer with a camera :) The best way I can serve you right now is to refer to the contractor if you want to know further details: www.vanvulpen.eu/nl/nl/1/home.aspx
BbqHoorn thank you! take care
Szr7zMix5kcV6F3 if it's taco Tuesday its all of them including backup mobile pumps!
Favor enviar informacion tecnica , certificacion , personal de contacto
Do you ha e a video of the fusion machine used for this size pipe?
This may not be the exact machine they used on this project... but this one would do it... th-cam.com/video/xIhORaa7v8s/w-d-xo.html
How do you go through an alluvial material with rock bolts? Is it possible?
What parameters do you need from the soil study?
¿Cómo se atraviesan un material aluvial con bolos de roca ?, ¿es posible?
¿Qué parámetros necesitan del estudio de suelos?
Is that pipe or tube ?
Amazing!!!
Why just today.. I was chatting with the landscaper, and he said the lawn irrigation line went under the driveway, and would be impossible to replace without digging it up...
I said, no, I have seen gas lines pushed thru places...
He said bad words.
Either your landscaper don’t know $h!t about pipelines or he’s totally dishonest and you should get yourself a new landscaper... honestly either way you should probably get yourself a new landscaper.... seriously.
Sou Brasileiro e sou operador de navigator, tenho 8 anos de experiência. Tem uma vaga na empresa de operador de máquinas?
nice job
Good job
Omg the drone ad that played during your video was so full of it 99$ drone retail $5,000 lmao
Pretty amazing.
Jesus Christ that pipe is big. Wait for it...
where I live on vancouver island our excavators dont leave home without toothbucket. Netherlands have sandy silty soil that is easy to manipulate..
I can't speak for Holland but certainly a lot of places we dig in the UK having no teeth is less to do with ground conditions and more to do with what might be buried in the ground. Old cities, old towns, all without any real services drawings make for unpleasant digging.
Que bonito país si cuenta con infraestructura y hermoso clima de 🍂🍂🌴🌳🌴🌳🌴🌴🌲🌴💢🍂💢💖💘💖💣💜💚💜💗💙👋💙👋💙☔☔☔☔💧🌊☔☔🌂☔☔☔
Goeie video bedankt maat.
4:59 how do I get that job?
sehr beeindruckend ,diese Technik ! Das sind eben Holländer....die haben das im Blut...!! Weiter so mit solchen Videos ! Danke !
Deutsche Technik ist doch auch sehr gut
I love this
wow nyc work
Nice HHD
that's about the setup i had to get my 3 phase to my spa thru all those 90s
What are those buoy looking things attached to the pipe?
The Notorious GHOST BL/_\DE pull heads
As a utility locator my only question is how the hell would I locate this pipe? I didn’t see and tracer wire on the pull back. Great Video super impressive.
Put some green along the road and clear the ticket lol
Sewers usually aren't located
Utility locators don't locate sewers you usually get with the city and they could've drilled it with mapping/ an azbuilt and turned the profile into the city after surveying the numbers in
It will get located by a digger one day! And ther will be human waste pumped high into the air!
It should be logged in the council plans giving the exact depths and locations using the modern tech of gps ( an engineer with a trimble )
Excelente 🇩🇴🇩🇴🇩🇴🇩🇴🌎
Waww se jeant thank you very macht 👍👍👍👍👍
Who is else watching this in 2020 😅😅
I'm watching it in 2010. want tomorrow's lottery numbers?
not me
Fun Is Here me
Watching it in 2021.
@@kebo57 Me too :) - 2021
Wow amazing... I like this
In the UK we could of done this in twice the time, 3 times the cost and with a complete shutdown of all local roads and massive inconvenience to anyone who lives and works there
THEN
Just for a laugh we would do it again as someone didn't have the correct form filled in
thinfourth still quicker than Australia... 😉
Right, and you guys still can't seem to learn how to drive on the *RIGHT* side of the road!!
Proud to be an American where we would fuck it up the same way. :D
canadian cities are under road construction all summer every summer. something we get used to
pfft... in spain we would do it for 10 times the time and 50 times the cost.
like it, just wondered if the pipe was tested before thay put it in.
sure, otherwise it would be a waste of time and money.
HDPE had been used for decades in this application and best of all it's all fused into one pipe so no leaks.
Вот как надо работать, даже деревья огородили чтоб не повредить, а у нас бы выпилели (мешают).
curious how they had a tunnel hole going thru there beforehand; I suppose they bored the hole thru with a small rod and increased the diameter with larger bits.
Directional drilling to make the hole, then remove the drill, attach the puller head, Hook up the pipe, video shows the rest
The average dog is a nicer person than the average person
Cartels of el chapo need This tool
🤫🤦♂️
so apparently the fusion joints are stronger than the rest of the pipe.
ObsessionPC yes they are you will pull the pipe apart before you break a weld
ObsessionPC this is true I use to fuse pipe
Hydraulic Fusion for that pipe 👍
Not really. Thicker wall thickness because of the bead but that also creates the weak point. The pipe will break right next to the weld. Any miss alignment in the weld and varying wall thicknesses between pipes also de rates the weld slightly.
Couldn`t they have done that on the Channel Tunnel? With a wider pipe of course, :-)
How much day for install that pipes?
Compares to traditional method.
within 1 day
A little explanation would have been nice. I assume they borrowed some tech. from the Oil Industry - as in a horizontal drilling rig.
I would be interested to know how they check the grade before they pull the pipe though.
vanvulpen.eu/
I see they waited for it to get wet before they started... what gentlemen!
In South Africa this would have taken 10years ,1000 construction workers and then 20 government officials would have earned BMWs from it. And it would leak probably.
Seen this done with a pipe line in the oil field.
Good video. ♡ T.E.N.
Amazing
My only question is I’d like to see how they planned it to keep grade on the gravity sewer this is amazing to watch
It aint gravity. The contents are moved using high pressure pumphouses. Thanks for watching and asking.
It’s easy your bore shot starts at the deepest level and then gradually goes up like 2% maybe even 4% the whole way until you meet up at the exit pit beat way to do it is make your entry pit 2 feet deeper than your exit pit
Wait !
Super stunt weeend ?????
Whats that ?
Ahh tuggers , 7 days set up , 1 day pull , 4 days tear down , 1 month clean up restoration .lol cheers .
Back in the 70’s when i was doing this, we would hand pull that in.
Back in the 60's when i was doing this we would use our beards to pull it, uphill, in the snow.
Back in the 40’s we had slaves pull it for us
It remember me the oilfield jobs 😂😂😂😂, drill holes lol
What if the connection breaks when it’s underground?
That ain't gonna happen.
I have done a 4" bore job with hdpe. But I have fused up 24" dia. pipe for a casing pipe bore job and have done 8" and 10" break in place.
I deal with those kind pipe hea on Kauai Hi we fuse 1” -36” inch pipe
Eric Schiffer there's a big stack by the mill in Kekaha. I'm from Eleele
Horizontal Directional Driling machines (HDD)
What was the price tag on this massive job?
No idea
Big bucks my guess is at least a few mill (in USD).... I mean it’s 722 ft of 3.6ft diameter pipeline installed with trenchless technology. (Looks like pressure rated pipe to me too)
Honestly you’d want to hire a good Consulting Firm to estimate/calculate job pricing for you on a project this size in advance... Somebody like Bryan Hauger Consulting in the USA can provide those kinds of answers and set up these kinds of jobs.
I want join this job
Did that here on 495 under Beltway DC area
Lot of shit in D.C.
I have never seen before because in my country the way is different. This is a good way.
I'm pretty impressed the ground not moning Lol
should hae at least shown the drill end coming out of the ground instead of hole just appearing
Who knows how much does this machine cost?
TO Build the modern civilisation IN 21ST CENTURY love it.
I used to work in a drilling company Hard rock directional drilling worked with the Vermeer 1,000,000
These are the people who make your life better, not the goverment
These Infrastructural techniques are funded by the Dutch Goverment.
I like this video. I need you to do this job for me in Vietname
Hi are you still looking for this kind of work specialist? Write me if you have any project.