How to Install Aftermarket Radio and Backup Camera in 2009-2013 Mazda 6
ฝัง
- เผยแพร่เมื่อ 16 ก.ค. 2024
- Parts used:
1. Wiring Harness - Metra 70-7903
amzn.to/41Ilp59
2. Double Din Kit - American International MAZK860
amzn.to/3TGSlZS
3. Antenna Adapter - Metra 40-HD10
amzn.to/3vityRT
4. Radio - ATOTO A6G2A7PF
amzn.to/41DNbQv
Follow us on:
Instagram: @DMWAUTOSS
Facebook: DMWAUTOSS - ยานยนต์และพาหนะ
Great job. I am about to tackle the same install. Like the way you cut out the unnecessary points. I have already run my backup camera in preparation. I was able to unfasten the rubber weather loom and use a long rod or screwdriver to push through it. I then attached a cable with take and pulled it through. once through I attached the camera cable to the pull cable and used a little WD40 to help it through the loom. It went through without issue. Again, great job.
🙏🏾🙏🏾
Very informative video. It helped me through an install! Thanks dude!!
Thanks man gonna work on my soon and this gave me the answer to my question
🙏🏾🙏🏾🙏🏾
Good video nice job but I could not see where you drilled the plastic and what size hole I am doing the same car this week
Awesome video man! Thank you.
I’m having some trouble with the steering wheel buttons, they’re connected to the white/black and the brown is grounded, did you have to enable a setting or something? Even when trying to program them, they are not responsive
Nothing to enable, just program the buttons. What year is your Mazda?
@@DMWAUTOSShey! 2012, turns out it was a mislabeled key 1 wire on my head unit. It the key 1 and reverse wires were swapped.
@zman-es3ck cool, glad you figured it out
@@DMWAUTOSSI do have another question though if you wouldn’t mind taking a stab at it. Have you gotten your red time/direction panel working right by the hazard switch?
I have the same year Mazda 6 as you do things were nearly identical.
Also, there were 2 main connectors coming out of the old head unit. The one is connected to the new wiring harness but the other one is left disconnected as it has nowhere to go. Is this meant to be?
Thank you in advance!
Would a 9 inch fit in the double din kit since it usually sticks out so it wouldn’t have fit inside the kit like the 7?
The 9” would fit as long as it has the standard double din back side to it for the mounting
@@DMWAUTOSS I appreciate it. Video helped lots 🙌🏿
Wut after market radio brand and model r u installin?
All parts used are listed in description