Enya SS40 A Clean Up Story
ฝัง
- เผยแพร่เมื่อ 13 ต.ค. 2017
- Just as the title states. I mention how excited I am about this engine. Just wait to see the run video!
To contact me via email please watch:
• How To: Search and Con...
To donate to help keep this channel operational please click the link below. All donations will be used to fund projects for this channel.
www.paypal.me/dmrcflyr2 - วิทยาศาสตร์และเทคโนโลยี
Excellent restoration David. I'm a big fan of Enya engines.
Thanks for posting!👍🏻😃✌🏻
80s especially early 90s Enya engines are without a doubt amongst the best.
Lapped means ground with a cutting paist, valves are lapped after they are ground to mate the surfaces together it is a process that gives a finer finish after the initial machining.
I’ve got two ENYA SS40’s. The later version has a two piece muffler, a bit more like the OS mufflers. I think I prefer the one piece muffler. Judging by the amount of crud on that engine I’d estimate it’s had a lot more than a gallon of fuel through it. Mine looks similar condition and I ran it for years. Just about to do my own SS40 engine cleanup and not being able to get that cleaner you advertise, I’m actually going to use Ethylene Glycol mix with water (taking all precautions) and simmer it for an hour or two. Saw this on a British YT video. Just testing on the muffler first in case it doesn’t work.
I'm gonna get one of those ultra-sonic cleaners.seem to work very well.
I used to spray the LA's on and scrub. NO MORE! This ultrasonic is THE best investment I have made in a LONG time.
After watching your videos David I’m definitely investing in an ultrasonic cleaner too. Just having trouble trying to decide between the 3L size or the 6L size. The 6L has a drain tap which might be handy but I’d have to use more cleaning fluid each time, so it’s hard to decide.
hello,like your tutorial,do you have another tutorial how its done on ultrasonic cleaner please? thanks
I have a SS40 in an own-design model that has done many hundreds of flights and it's still good. As you say - you can't kill them. One benefit you don't mention is the low weight - in comparison with the SS40BB or pretty well any other 40. Simplicity, low weight and plenty of power: hard to beat. Oh and "hand lapped" means one of the (three) Enya brothers apparently spent about 20 seconds with piston, cylinder and lapping paste hand lapping every engine.
Very nice video and the engine looks new if not almost new, wondering what solution you used in the ultra sonic cleaner to clean it
Same cleaner I use and have mentioned many times in my videos.
th-cam.com/video/JFYfcV1Fsxk/w-d-xo.html
th-cam.com/video/1EREkE4PBHc/w-d-xo.html
ok,thanks
What cleaner or solvent do you recommend to clean old EXTRAMLY gummed up engines? say I only have the cleaner you suggest and a toothbrush no ultrasonic.
I have a plain bearing Thunder Tiger GP-42 that's worn out. It's in very good condition with excellent compression and has never had a hard crash. If I want to replace the block with its plain bearing (I can get a new one on ebay for $18), will the crank fit ok? I'm not sure about the tolerances?
hello dave. ive completely adopted your cleaning process. i just got my ultrasonic cleaner today. and i was wondering if you use that powder they sell to use in them or do you use only the l a s and water
I do not use anything besides LA's and water.
thank you sir for your time again
❤ 🦅
I'm sorry I didn't hear the name of solvent you use in your cleaner
Any recommendations for a good surface cleaning without disassembley!
LA's Totally awesome cleaner and a toothbrush.
@@dmrcflyr2 Thanks it just so happens I have a new bottle of that in the garage!
Sure that the SS means "Super Sport"? I remember to having read it means "Schnuerle Scavenging" which would make sense since the predecessors were still cross-flow.
Edit: Okay .. the manual says "Super Sport". Still not totally convinced, there could be a difference between the marketing and engineering meaning.
would like to see you review my cleaner next to the la stuff...i use same ultrasonic bath for about 6 years now
What is your cleaner?
David McIntire its some stuff im thinking about marketing
David McIntire would be interesting to see how it stacks up
I would try some.
David McIntire i have tried emailing but cant get email to open after checking the captcha
What solvent is recommended. Videos of this type never mention it!
Wrong. I have mentioned it MANY times in MANY of my videos. If you can’t find them then I cannot help you. Each TH-cam channel has a search function. It is very easy to find what you are looking for.
can you get from harbor freight and la cleaner
No LA at HF. Dollar Tree or Dollar General. DT is a bit less expensive.
I much prefered Enya and Super Tiger engines over OS.
I liked the OS engines from the 80's-90's over their ones from the 2000's to present with 2 exceptions. The V series FS62 and 95 are extremely excellent engines. But as a general rule of thumb Enya engines are preferred.
Just got me an ENYA 45 II MODEL 2006 ITS SIMILAR
I appreciate your videos a lot but this one is a little disappointing. You spent half of the time talking and then you cut the part where you disassemble the engine which for noobies like me would have been very important.