It is so funny! I have been trying for several hours to set up my controls and getting so frustrated that I shut it down! I really needed this video, thank you!!
Was watching your video showing how to set the controls and thought 'Nope, won't be getting rid of SPAD when I upgrade to 2020'. It's just has so much more functionality.
How is it they designed a system so complex and they cant design it so your seeing your controller movement onscreen? Like if I move my joystick I should see it onscreen and know its the one I am selecting. Instead you assign Joystick1left upX/Raxis to pitch. How is that a good design?
I use Logitech controllers (pedals and yoke) but I also have plugged into the yoke the multipanel and switch panel also from Logitech. MSFS2024 will not see these two peripherals. This is why I use Spad.Next.
In free flight mode, everything works fine, I managed to program the C172 G1000 so I can use all the rotaries, start battery, alternator, etc. But in career mode my inputs don't seem to work. So far I've only been able to control a few things like heading and toggle alternator. I have to use other events, changing data value doesn't work at all. Everyone else has this too?
An inspirational video, thank you. I have spad.next but I've only used it for things I couldn't do in the MSFS configuration settings. If I set it up for everything would it work with MSFS 2020 and 2024, simply depending on which version I used? Also, how do you backup your settings?
I cant speak for 2024 yet, but as stated in the vid you may need to alter a setting or two that changed in ms2024, but i got tired of loosing my msfs2020 custom configurations when i had to reset my MS profile! So all my controller configs are in Spad, and yes BACK up those settings files. I keep a second directory on a flash drive with all my Spad , Mobiflight & other 3rd party configurations! Nothing worse that a pc snafu and zap - 3 months of work gone.
Thanks for the analysis! A bit off-topic, but I wanted to ask: I have a SafePal wallet with USDT, and I have the seed phrase. (alarm fetch churn bridge exercise tape speak race clerk couch crater letter). How can I transfer them to Binance?
I’m having a problem. Most of the aircraft with avionics have black screens no matter what I try. I am using the Honeycomb yoke and throttle but it does the same with my virple stuff hooked up so I don’t think it’s a switch issue. Any thoughts?
i sat at my pc for 100s of hours on 2020 not this time for 2024, better things to do in my life than sit on mfs 2024 for another 100 hours plus love your work thanks for your hard work tho i think i'm done with mfs 2024
Can you make a video (or direct me to one) on how to use Spad to copy my control settings from MSFS2020 over to MSFS2024? My desire is to use my joystick/throttle/rudder controls exactly as is on FS2020 and use them for FS2024.
I can no longer get inside the plane, the toggle between the cockpit and the outside view no longer works. It worked fine yesterday. That's it I'm applying for a refund!
there is no staff only users... maybe share your discord user name and where you felt you were treated badly ... most people go in an think the people helping are paid staff when they are just users trying to help -- when they don't get someone remoting into their computer to configure the plane for them they don't like the response....
Starting days I get but is anyone else tired of paying full price to be what used to be a beta test software? High price, low bar... Also TCA Boeing edition isn't quite working yet either... Will be sticking with Spad for sure!
In ms2020 you do. I created a "empty - Spad" profile for all my controllers. That way you still can switch back to the Default or any other profile in the game. Also be aware there 'seems' to be lots of multiple bindings in MS2024 for some controller switches, just watched a video on that! Its such a cumbersome gui.... spad is a relief
Hello, I am experiencing difficulties programming my Yawman arrow using Spad. Despite my efforts, I have been unable to initiate any movement of the arrow’s internal buttons within Microsoft Flight Simulator 2024. I have updated both the application and the bridge software (LVAR), and the Spad add-on is located in the community folder. However, I am unable to make it functional. I won’t even dare to ask in their discord channel 😅
funny -- you did ask in the discord ... and you were responded too where you even said " Thank you ... I needed to restart spad, I can see it now!" ... the entire discord is replied to by users that have no monetary influence yet they get bashed on when people show up and expect to have someone program their sim for them.
@LesOReilly So, I was having trouble seeing the controller in Spad, so I asked for help in the Spad Discord. When I restarted Spad, the controller appeared. But now, I can’t seem to program a simple left or right brake. I add the events, but the brakes don’t move. It’s the same with the trim. That’s what I was writing about here. I don’t usually use the Spad Discord unless I’m stuck, like I am now. I’m just looking for some guidance on what to do. I don’t need anyone to program it for me. I’m sorry if this is a bit of a hassle. It’s possible that this is a bug with the simulator, as this controller isn’t very common, and not everyone uses Spad with it.
I was already ready to use SPAD. Seeing you trying to get into the airplane made me chuckle. Try hopping in the PMDG 777 300ER. I can walk around this beast but I can exactly open a door and walk in. 🤣 You are correct on customer support. I asked them one question and they were assholes.
@@OverkillSimulations I don't know how it works until I can figure out how to get into it. LOL Reading posts from Robert Randazzo, they are working on it. They did not get the SDK with enough time to be ready for launch. I think it is a familiar theme for developers. It seems like a no-brainer but I won't criticize. I have a rule to not criticize unless I have been in those shoes. I have not. :)
Oh man, the control setup is a MESS. They happend to take the 2020 control mapping which is terrible and make a it 10 times worse! I really wanna like 2024, but its very difficult right now!
Have not tried Spad, but downloaded 2024 in 1/2 hour (mid-day-Illinois on the 20th), and after configuring my Bravo I took a short flight in the 172 from KDPA to KDKB with zero issues-smooth as silk! I have the Ryzen7 3800 cpu and AMD RX 5700TX gaming card.
Microsoft wanted to gamify FS2024 more. I think that's why we got that interface. Not a fan. I agree it's worse. Although, to their credit, I do think it's a little smoother and quicker.
I want to thank Steam Customer Service for processing my request to refund my purchase in just a little over an hour after I sent it.. Given the climate and mass of the requests for service at this moment, I was solidly and pleasantly surprised.
oh hello Kettle :) --- remember that you were another user just like us that was helping out -- YOU spent more time posting memes that were "Leaders are Readers!" when people had some repetitive questions.... No one is perfect :) people get aggravated when search is not done.. and Real time communications are not as easy for many. Your personal issue is that the Dev of SPAD stopped talking to you because you wanted him to teach you how to make a WASM file that would allow your software to send H and B Events t the sim without the need for SPAD to be your gateway -- that is NOT a horrible human .. that is just a person that has no interest in helping you compete with their software. if your going to pretend like you are a consumer protecting consumers -- don't leave out the history details..
It is so funny! I have been trying for several hours to set up my controls and getting so frustrated that I shut it down! I really needed this video, thank you!!
Just did the same. Asobo have somehow made controls setup even worse than 2020.
Was watching your video showing how to set the controls and thought 'Nope, won't be getting rid of SPAD when I upgrade to 2020'. It's just has so much more functionality.
I agree, the msfs 2024 control configuration tool really is a pour design..
How is it they designed a system so complex and they cant design it so your seeing your controller movement onscreen? Like if I move my joystick I should see it onscreen and know its the one I am selecting. Instead you assign Joystick1left upX/Raxis to pitch. How is that a good design?
@@dealwolfstriked272recycling fs 2020 code is much cheaper
I use Logitech controllers (pedals and yoke) but I also have plugged into the yoke the multipanel and switch panel also from Logitech. MSFS2024 will not see these two peripherals. This is why I use Spad.Next.
In free flight mode, everything works fine, I managed to program the C172 G1000 so I can use all the rotaries, start battery, alternator, etc. But in career mode my inputs don't seem to work. So far I've only been able to control a few things like heading and toggle alternator. I have to use other events, changing data value doesn't work at all. Everyone else has this too?
An inspirational video, thank you. I have spad.next but I've only used it for things I couldn't do in the MSFS configuration settings. If I set it up for everything would it work with MSFS 2020 and 2024, simply depending on which version I used? Also, how do you backup your settings?
I cant speak for 2024 yet, but as stated in the vid you may need to alter a setting or two that changed in ms2024, but i got tired of loosing my msfs2020 custom configurations when i had to reset my MS profile! So all my controller configs are in Spad, and yes BACK up those settings files. I keep a second directory on a flash drive with all my Spad , Mobiflight & other 3rd party configurations! Nothing worse that a pc snafu and zap - 3 months of work gone.
Thanks for the analysis! A bit off-topic, but I wanted to ask: I have a SafePal wallet with USDT, and I have the seed phrase. (alarm fetch churn bridge exercise tape speak race clerk couch crater letter). How can I transfer them to Binance?
I’m having a problem. Most of the aircraft with avionics have black screens no matter what I try. I am using the Honeycomb yoke and throttle but it does the same with my virple stuff hooked up so I don’t think it’s a switch issue. Any thoughts?
i sat at my pc for 100s of hours on 2020 not this time for 2024, better things to do in my life than sit on mfs 2024 for another 100 hours plus love your work thanks for your hard work tho i think i'm done with mfs 2024
Can you make a video (or direct me to one) on how to use Spad to copy my control settings from MSFS2020 over to MSFS2024? My desire is to use my joystick/throttle/rudder controls exactly as is on FS2020 and use them for FS2024.
Nice straightforward vid. Thanks boss…appreciate it
It’s like they fired the guy who made the ui for 2020 then told the intern to do it
I can no longer get inside the plane, the toggle between the cockpit and the outside view no longer works. It worked fine yesterday. That's it I'm applying for a refund!
Are your earlier tutorials for spad applicable to the latest version of spad?
I’m one of those who was treated very badly by their staff
Thx Lee
there is no staff only users... maybe share your discord user name and where you felt you were treated badly ... most people go in an think the people helping are paid staff when they are just users trying to help -- when they don't get someone remoting into their computer to configure the plane for them they don't like the response....
Starting days I get but is anyone else tired of paying full price to be what used to be a beta test software? High price, low bar... Also TCA Boeing edition isn't quite working yet either... Will be sticking with Spad for sure!
Do you have to disable all the bindings in the sim as well? If not won't they conflict?
In ms2020 you do. I created a "empty - Spad" profile for all my controllers. That way you still can switch back to the Default or any other profile in the game. Also be aware there 'seems' to be lots of multiple bindings in MS2024 for some controller switches, just watched a video on that! Its such a cumbersome gui.... spad is a relief
@@DBMGH Thanks I noticed that myself, that's why I want to switch. Have basic controls setup already.
Hello,
I am experiencing difficulties programming my Yawman arrow using Spad. Despite my efforts, I have been unable to initiate any movement of the arrow’s internal buttons within Microsoft Flight Simulator 2024. I have updated both the application and the bridge software (LVAR), and the Spad add-on is located in the community folder. However, I am unable to make it functional. I won’t even dare to ask in their discord channel 😅
funny -- you did ask in the discord ... and you were responded too where you even said " Thank you ... I needed to restart spad, I can see it now!" ... the entire discord is replied to by users that have no monetary influence yet they get bashed on when people show up and expect to have someone program their sim for them.
@LesOReilly So, I was having trouble seeing the controller in Spad, so I asked for help in the Spad Discord. When I restarted Spad, the controller appeared. But now, I can’t seem to program a simple left or right brake. I add the events, but the brakes don’t move. It’s the same with the trim. That’s what I was writing about here. I don’t usually use the Spad Discord unless I’m stuck, like I am now. I’m just looking for some guidance on what to do. I don’t need anyone to program it for me. I’m sorry if this is a bit of a hassle. It’s possible that this is a bug with the simulator, as this controller isn’t very common, and not everyone uses Spad with it.
I was already ready to use SPAD. Seeing you trying to get into the airplane made me chuckle. Try hopping in the PMDG 777 300ER. I can walk around this beast but I can exactly open a door and walk in. 🤣 You are correct on customer support. I asked them one question and they were assholes.
How’s it working in 2024??
Yeah I couldn’t figure it out lol!!
@@OverkillSimulations I don't know how it works until I can figure out how to get into it. LOL Reading posts from Robert Randazzo, they are working on it. They did not get the SDK with enough time to be ready for launch. I think it is a familiar theme for developers. It seems like a no-brainer but I won't criticize. I have a rule to not criticize unless I have been in those shoes. I have not. :)
VPC panels are awesome. I have one mounted on a wall tv mount that swings out when Im in GA aircraft. Controls condition levers, flaps, gear, trim etc
Just ordered VPC CM3 throttle and alpha prime. Can't wait!!
@@bissonFamilythat is great for helicopters.
@@alanwright4575 and that's exactly what I wanted to hear. Looking forward to doing all those heli mission in MSFS 2024 career mode. :)
Overkill- I loved Chase Plane in P3D, why hasn't Parelle 42 created that product for MSFS 2020 AND 2024? It was so easy to use.
Doesn't Aircraft manager work with fs 2024? It does all that
Oh man, the control setup is a MESS. They happend to take the 2020 control mapping which is terrible and make a it 10 times worse! I really wanna like 2024, but its very difficult right now!
Can you do a tutorial on helicopter controls using SPAD?
Yes I will :)
Yes…not good UI in the sim. I just havent gotten used to spad either. Its pretty complex, and I cant seem to get a grasp on what and how to setup
Look for my videos bro! I have a ton of tutorials if that will help
@ ….will do. Its probably just impatience on my part 🤣
Also try downloading pre made profiles for your aircraft and then altering them a little. Works for me nearly every time 😊
Yes i used spad when alpha testing and worked then
I have Spad.next since P3DV3.5. Almost one century ago. LOL
Thank you yet again and again.....
lol my pleasure
Have not tried Spad, but downloaded 2024 in 1/2 hour (mid-day-Illinois on the 20th), and after configuring my Bravo I took a short flight in the 172 from KDPA to KDKB with zero issues-smooth as silk! I have the Ryzen7 3800 cpu and AMD RX 5700TX gaming card.
Microsoft wanted to gamify FS2024 more. I think that's why we got that interface. Not a fan. I agree it's worse. Although, to their credit, I do think it's a little smoother and quicker.
I will agree with all of it
spad has always been top tier
Yeah as much as I enjoy the added benefits of spad, some of their support people on discord are extremely condescending!
there are no support people ..only other users that get abused
Not being able to port controls over from 2020 is so bloody stupid!
Different system.
Yes I use it and they are VERY RUDE 100%
Yes, one of these guys is particularly odious when replying to users. 🤮
your wrong device might be a xbox controller drifting unplug it
I thought so too but it did it again today with nothing else plugged in. Really odd
@@OverkillSimulations dang
Another annoying thing- trying to enter the plane that doesn’t have a door. They should have on the dash, press “shift+c” to enter the cockpit.
I want to thank Steam Customer Service for processing my request to refund my purchase in just a little over an hour after I sent it.. Given the climate and mass of the requests for service at this moment, I was solidly and pleasantly surprised.
If you’re going to “speed through this” why even do this video. Please keep your novices in mind.
My apologies. I didn’t think I was. However search my channel for SPAD I have tons of tutorials
Thank you for being thoughtful enough to reply. Great Channel!
Horrible customer service and horrible human. Wouldn’t buy shit from them ever again.
oh hello Kettle :) --- remember that you were another user just like us that was helping out -- YOU spent more time posting memes that were "Leaders are Readers!" when people had some repetitive questions.... No one is perfect :) people get aggravated when search is not done.. and Real time communications are not as easy for many.
Your personal issue is that the Dev of SPAD stopped talking to you because you wanted him to teach you how to make a WASM file that would allow your software to send H and B Events t the sim without the need for SPAD to be your gateway -- that is NOT a horrible human .. that is just a person that has no interest in helping you compete with their software.
if your going to pretend like you are a consumer protecting consumers -- don't leave out the history details..
@ you’re an idiot. As usual don’t know the facts. I never and have never made a competing product idiot.