Vlog # 16 - Best carburetor setting for old bullet | VM-24 carburetor tuning | Old CI Engine Bullet
ฝัง
- เผยแพร่เมื่อ 3 มี.ค. 2021
- Best VM-24 carburetor setting for the old CI engine bullet.
Old Royal Enfield Standard 350's specifications - 346cc Single Cylinder, Air-cooled, 4-stroke, contact breaker, cast iron engine with 18 hp @ 5625 rpm and has 32 Nm @ 3000 rpm of torque with right side 4-speed gears and gives mileage of around 27 to 34 KMPL.
This video was recorded on MI Note5 and the editing was done on windows 10 video editor.
You can follow me on Instagram at - / sourabhbhalevlogs
My other moto-vlogging videos -
Pune to Kashid ride - • Vlog # 10 - Pune - Kas...
Pune to Lonavala via Tamhini ghat - • Vlog # 7 - Pune to Lon...
Breakfast ride to Narayanpur on my old bullet - • Vlog # 4 - Breakfast r...
Pune to Pawan lake breakfast ride - • Vlog # 12 - Breakfast ...
old model bullet
ci engine bullet
right hand side gear
old bullet
royal enfield standard 350
royal enfield bullet
old bullet carburetor setting
My carburetor used to be a bit warm then I saw your vid and did the settings myself and now my carburetor isn't warm anymore but chill.
Thnx for the vid man! 🫶🏻
Thanks bro
Love you man for auxiliary screw
Mast information about the bikes
Bhai bahut hi badhiya information .my favourite old modal bullet❤️
Thanks 🙂
@@sourabhbhalecreation bhai ye krne se better mileage milega kya????
Thanks for watching. Bhai carburetor tuned rahega toh mileage jarur badhega
Good job👍👌
Hi. Why do lost mechanics keep the aux screw in the closed position?
Will opening the aux screw make the fuel to run leaner and created an issue with the Piston as the fuel flow to the park plug will be much lesser.
Because from what I know is that a fire burns hotter/at higher temperatures when more oxygen is provided (like a rocket stove).
Am a novice and hence only clarifying my long pending doubt on it.
The cast iron bullet motorcycle engines are set to have slightly richer air- fuel mixture than usual for proper running. With the advent of the aux air inlet the mixture started becoming lean giving the rider the benefit of more mileage.
But this has its own drawbacks such as the engine running at higher operating temperatures, and engine knocking or pre ignition.
Higher engine temperatures reduces engine wear and tear life,also the oil cooling capacity is just adequate since these engines are having primitive spindle operated oil pumps(very inefficient). Engine knock is harmful for the engine(can destroy the piston).
For these 2 reasons certain mechs completely close the aux screw and keep it closed for the bike to idle and run properly. If you work it out, these machines had the aux manifold added later on for extracting more mileage and reducing emissions. But if these engines should run happier the engine should be tuned to be slightly rich.
Awesome
Bhai g2 engine me kr skte hain
Nice, Helpful and Useful tips. 🎉🤲
Thanks bro
👍
Nyc video bhai isae water vapour ayenge subhe start krne se
Thank you buddy
bhai mere pass standard 2003 and 2009 dono h.. pr bhai mere silencer se water drop nhi nikalat.. thanx you for good information..
Ek video bhai air filter pe b bnao ap koi video ni ha TH-cam pe broo ❤️❤️
😘❤️😘
नमस्ते सर बहुत बढ़िया जानकारी दी है. कई मिकेनिक ये ऑक्सीलेटरी स्क्रु को बंद कर देते हैं या पुरा पार्ट ही निकल देते हैं बोलते हैं ये कामका नही है. 👍
Thanks for watching the video. The Auxiliary screw should not be closed as it passes the extra air to the engine. Otherwise engine over-heat ho jayega.
Bro my dad has a 1980s modal royal Enfield. Due to some issues we had to change old carburettor to new one, but after changing it the bike doesn't feel the same anymore. The thump is also not loud while idle and the exhaust sounds smooth. Not as loud as before. You know the reason why?
Bro idealing karke dekho ek baar. Carburetor cannot cause this issue.
Bhai ji agar me idle screw thoda sa badha ke rakhu to kya average pe fark padega??
Bhai ekdam minut farak padega. Pata bhi nahi chalega
Very informative video . Aapki motorcycle lighter crank weight ki hain !?
Thanks. No its a normal one.
@@sourabhbhalecreation i think if it were of the heavy crank , the idling would have been slower after adjustment
The idle is much slower and smooth. Its just that my mobile camera couldn't record its correct sound. 😊 There was a lot of disturbance in the sound..
Bhai kuch logo ne video bnai ha boh ibar rotate krte ha bolt aur half bar boh b Sahi ha kya setting
Bhai ideally 2 and half rotate karna chahiye
@@sourabhbhalecreation mtlb bhai jaise apne 3 time rotate kia ha boh maine kia tha usae water vapour b aya meri bike ma subhe frst start ma
sir i purchased used electra 5speed 2007 model previous owner had removed the auxiliary and airfilter from side box,and uses air filter only from behind the carb box.now I've installed auxiliary srew and pipes but not installed air filter in the side box but still use the one on the box which is right behind the carb.sir will there be any problems with that please kindly suggest
Bhai no issues in that. Just keep the airfilter clean
@@sourabhbhalecreation thank you sir
Bro. Bullet ka chhota bhai *Rx-100* ka ideal carburetor setting ka ak video banaiye .
Sure. I will make it soon.
TX fr d video.. Just wanna know d various reasons of ur CI bullet engine switching off once u come to a halt or sudden braking. Ideally once u stop on neutral it shld keep running in idle. Would appreciate ur help. Tx in advance..
Ideally the engine should keep running in idle position for a while but its not possible everytime. Its fine if we are switching off tue engine suddenly
@@sourabhbhalecreation I think u misunderstood d question - Lemme put it this way...When u throttle d accelerator d engine revs n once u leave d throttle it shld ideally keep running on idle wid d accelerator back to its original position But in my case d engine stops running after d throttle is released..So I need to keep reving unnecessarily to keep it running..My idling is a little on d higher side than normal. So plz do lemme knw d possible reasons fr d same..Tx
Do clean the carburetor one. This happens due to carburetor fault
Once you clean the carburetor, tune it correctly once
@@sourabhbhalecreation Do u hv an Insta id? Or can u share ur email id? I wld like to contact u through em
Waaa Bai,,. Koi b mechanic ko ase setting nhi aati Punjab me..
Mere bullet ka carburettor ki problem hai k apne app acc. BD jata hai ... What is solution?
Hi,
Have few questions - hope you have some answers.
* I have a 2002 CI Electra CDI ignition and will complete 20 years in May 2022... have not yet changed the carburetor since I bought... Off late not getting the desired setting and slower idling for some reason ... Could it be because the carburetor is too old now?...can only the Air Fuel screw be replaced as it is worn out now?
I could see that your idling is also not that slow its pretty fast.
* Secondly the rear Shock absorbers if need to change which one do you recommend- Gabriel or Armstrong?
* Is there an update about scrapage policy for old bullets... hope I get an extension/renewal of RC in May 2002 for another 5 years?
Thanks for your time!
Hi bro, I think you should change the carburetor as 20 years is a big gap. For rear suspension, I would strongly recommend Armstrong. If you could remove it's sticker then it would be best.
@@sourabhbhalecreation I did not get about the sticker? Does the shocks come with some sticker and is difficult to remove?
Yes. It comes with a sticker. It gets faded after sometime and looks bad.
Old model bullets mein konsi company ka carburetor fitted aata tha
Mikcarb ka aata tha ek time me. Brand humesha change hue carburetor ke
@@sourabhbhalecreation thanks bro
Sir mere pas 2010 old Bullet hai usme ye work kre ga
yes it will work
Bro u have to open the air screw when ur bike is on
thanks for watching the video. I did the same thing in my video.
My Electra 2003 Engine is only starting when switching on the choke switch, when I turn it off engine turns off. Suggest the solution
The issue is with the lean mixture supply. Please set the carburetor.
Auxiliary screw ka setting nhi samjha aaya bhaiya..
Mainly that highest point wala concept
hi sourabh, i got a '09 electra 4s bullet and when my carb was malfunctioning, the auxiliary screw was fixed and it did not move at all and still does not, only the RPM and mixture screw opens up. Do you think it is a default mechanism or a fault? because i showed it to some old bullet mechanics and they are not familiar with it. Kindly help.
Few mechanics keep it tight. Honestly it doesn't make much difference
@@sourabhbhalecreation affirmative
Thanks
Bhai mere paas 1980 model bullet hai bahut laud sound hai silencer free flu hai kaun sa silencer best rahega 3 filter ya 2 filter indauri
I would recommend 2 filter silencer. Usme bhi accha sound hai.
Thanks bro
Axglary skru kitna churi kholna hai
Bhai usko aapko max rpm tak lana hai
Bhai old bullet ma joh carborator ke sath box hota ha uska filter Purana hojaye toh kya effect hote ha boh btao
Bhai air filter hota hai wo. Bike average kam degi kharab ho gaya toh
Acah bro konsa filter bol re ho ap jo carborator ke sath box ma hota ha ek toh piche hota ha jispe key lgti ha
Pehele wali bikes me carburetor ke sath wale box me aata tha filter. Baad me side box me aane laga
Old bullet ma 2hote ha filter
Saurav ji , liked your video, explained very nicely. I am a retired officer and an old time Enfield lover and own and ride a old model bullet CI engine bike even now at seventy! I understand you are a Punekar like me , please let me know your number if you don't mind👍
Thanks for watching the video. We can surely have a word on instagram. My id is - sourabhbhalevlogs
Sir, I did same but my auxiliary screw adjusting was jammed I guess because when adjusting it didn't affected the idling speed of the bike, why explain sir?
Honesty the aux screw doesn't make any difference to the overall performance of the bike. The bike will perform good even though if its jam
@@sourabhbhalecreation if then how will I know that the setting is been done perfectly sir?
Though the aux screw is jammed, once you open it, it will start working. All you need to do it to find the highest RPM setting
@@sourabhbhalecreation ok thanks sir, try tomorrow,
Ye like 👍 aapke bete ke liye . Aur 🍧🍦ye bhi meri taraf se uske liye☺️😘😘
Thanks bro 😊
🙏
make a video on best carburetor for old bullet.
Sure. Thanks for the suggestion
@@sourabhbhalecreation Mikcarb Zinc 350CC Bullet Carburetor, Model: 1200000000
Bhai max rpm pr lane ke baad auxilary screw ko phir hmari hmari idling bilkul slow kyun nhi ho. Pati
Bhai samjha nahi
Bhai bullet heat kr rhi hai
Auxiliary screw jam hai . Iske karan hi vo missing bhi kr rahi hai
Machanic ne carborator clean krne ka baad ya issue ho rha hai😢😢😢
Explain me please 😭😭
Bhai engine ko air mil rahi hai kya dekho acche se. Nahi to heating hogi. Missing ke liye point setting dekho. Wohi prob hoga
Bhai apko is setting se pani ki bnde dikhi silencer se 1st start pe
Bhai iska matlab carburettor best set hai
Bhai maine jb subhe bike start ki toh water vapour are thae mere bike ke iska mtlb apki video ekdam sahi ha aur apki setting b nyc video bhai ❤️❤️❤️❤️❤️❤️
Thanks bro
1.5 mein rakha hai kya
Ha bhai
Bro i have 1965 model bullet, it give jst 10km per 1 liter, plz bro give me solution
Thanks for watching. 10kmpl is very less. Do get your bikes carburettor checked once.
Thnx bro aftr lokdown I chek crburtr
Change charb
Bhai tumhari bike retire advance chal rahi hai point ki setting karlo carb mat badlo... 0.8mm par pistons ki setting karlo aur point ka gap khol do fir bolna kitna milage de rahi hai bike
Bhai 2002 wali bullet main patakhe ka button nhi hota ismai patakhe kese bajenge please
Bhai CI model me short punjab exhaust dalna padega tab bajege. Control nahi kar sakte patako ko old model me
@@sourabhbhalecreation short punjab hi h bhai
@@sourabhbhalecreation air pressure aur carborator setting se kuch ho skta h
@@kanisharya ek baar point set karo
@@sourabhbhalecreation sir mtlb?
1.5 mein rakhna hai
What is the best milage can get in 350CC Ci engine
Hi thanks for watching. The max average with best performance you can get from ci engine is 35-36. Not more than that.
@@sourabhbhalecreation 42 ki li hai maine winters me
Thats awesome
@@sourabhbhalecreation Agr mileage chahie toh whtsapp number do batata hu wha pe
@@honeyy7495 and saurabh bhale muje 25 ki aati hai... standard 350 hai 1983 ki
When i open axulary screw the bullet start getting off
That's natural. You will need to find the highest rpm point
@@sourabhbhalecreation advantage of opening axulary screw
Bhai to make sure the piston is getting proper air for combustion
Sar 1.5 samajh mein aaya per 2 2 ka matlab kya hota hai please jankari den
Samajh nahi aya bhai question
@@sourabhbhalecreation aapane kaha 1.5 22 iska matlab samajh nahin aaya
Bhai time bataoge video ka?
@@sourabhbhalecreation 3.16
Bro i meant 1.5-2. its not 2 2
भाई मेरी बुलेट का carburetor एक ड्राइव k baad काफ़ी गर्म हो जाता है, फिर बाइक स्टार्ट nhi होती , उसे ठंडा करो तभी स्टार्ट होती है, ever faced this?
Bhai aisa hona toh nahi chahiye. Heath ki wajah se starting issue nahi aata kabhi kuch aur issue hoga
@@sourabhbhalecreation strange issue to hai Mai bhi phli baar dekh rha Aisa but aise hi hota mere dost ki bullet hai uske sath bhi same situation
Sir aapki bullet kitna millage deti h
Hi. meri bullet 28-30 ka mileage deti hai. not more than that. highway par thoda jyada degi.
Sir new wali standard kitna milage deti h
New ka average 32-38 ke bich me hai
mene carburettor ka air screw ko 4 times 180 degree or fir 90 degree khola toh gadi ke silencer se smoke ane laga or fir water droplets niklne lage the but jab me trail ke liye gaya bahar toh gadi overheating hone laga or missing bhi kr ne laga toh mene gadi roka or fir jese pehle vala setting kr ke gadi chalaya toh thik chala
Bhai what about air fuel mixture screw?
@@sourabhbhalecreation i opened 2 Times 180 degree after full tight
WHEN SHOULD THE 1st SERVICE OF A RESTORED CI BULLET BE DONE?
It should be after 500 kms/within 1000 kms as all the parts are new. You much change the engine oil in the 1st service for better results.
@@sourabhbhalecreation WHETHER ROYAL ENFIELD COMPANY'S SERVICE CENTRES STILL DO SERVICING OF OLD CI BULLET ?
@@jasungill415 Yes they do. If they have a mechanic who understands the old engine.
Bhai muje b btao iski setting apka whatsap no do
I just saw a video from "mech auto clinic" about tuening carburettor and it seems as if this video is a copy of that video.
Bro there is no such copy and all. You will find all the videos similar on same topics.
Milege kitna deta hai bhai
Bhai 28-30 tak deti hai
@@sourabhbhalecreation how to adjust milega..?? Mera 86 model hai and milage 18-20 ka hi deta hai plz suggest how to adjust milega
Bro wait for next Friday. A new video is coming on same topic
@@sourabhbhalecreation thanq sir
Meri 35.40 deti hai
Wrong setting