Thank you! Thank you! Thank you! 🙏🏾🙏🏾 I just updated my controllers (Pioneer DDJ-SR) firmware & driver. And after doing that, I connected my controller to SeratoDJPro. My controller started up as usual with the whole unit flashing lights but the buttons & decks were unresponsive. I spent the whole weekend uninstalling & reinstalling the driver and damn firmware. And my controller still didn’t work. I tried this reboot to my controller, & it worked! We back in business baby 💪🏾 Thank you again!
Hi . Please I was on ddj sx2 and I just bought ddj sx3 and after installing the ddj sx3 . I realised it now loading tracks, and then I try the ddj sx2 as well it not playing as well. What can I do please?
All its good but you only have to unplug the controller from the computer, trim to low knobs need to be at zero the fader all the left then do his procedure, once in reset mode check trim to low knobs volume need to be zero to then go thru each half point then max your see your lights come on and should go with your increases
SUMMARY FOR ANYONE THATS IN A RUSH: 1.) Remove USB from Computer 2.) Remove all Connections (but power cord) 3.) Make Sure Device is Off 4.) press Deck 1 & Shift key on left side same time & then press on 5.) Check all buttons and panels to make sure they light on 6.) Once everything is working, press both syncs at the same time 7.) Turn back on controller Done
Everything was wavy, until the connection from my ddj-sx recognized my MacBook. I am using a new USB adapter also. Any help would be greatly appreciated.
I have an issue with my Ddj Sx2....I load a song on Deck B ...I lower my Fader and Move the cross fader to Deck A and it still plays ....I think my decks have inter changed
You click the que on the right side but your crossfader is on the left. How is that fixed. You shouldn't hear nothing if your crossfader is to the left on the right side
He more than likely had the crossfader switch on the right hand deck (under that channel) on the left or thro. You can assign any or all channels to one side or thro, if 'thro' is used the crossfader position has no relevance, I just checked, He has all his channels on 'Thro'
Was having an issue with my SX2 worked a treat thank you
Dude!!! Thank you I’ve waited for two years to fix this stupid DDJ sx2 wow! You fixed it - thank you 🙏🏽
This guy is good. This video helped me correct the slow response to jogwheel of my DDJ-SX2.. THANKS ALOT
Thank you so much!!!!
Great video thanks for all your help Obi.
I needed this. I was just about to have a party, and my ddj sx2 was acting funny. This reset saved my. Thanks 💯
Thank you! Thank you! Thank you! 🙏🏾🙏🏾
I just updated my controllers (Pioneer DDJ-SR) firmware & driver. And after doing that, I connected my controller to SeratoDJPro. My controller started up as usual with the whole unit flashing lights but the buttons & decks were unresponsive. I spent the whole weekend uninstalling & reinstalling the driver and damn firmware. And my controller still didn’t work.
I tried this reboot to my controller, & it worked! We back in business baby 💪🏾 Thank you again!
Thank you for your reply
I’ve watched other videos and it didn’t work this definitely worked thank you cheers
Awesome. Worked perfect on my ddjsx3 today. Thank u.
Hi . Please I was on ddj sx2 and I just bought ddj sx3 and after installing the ddj sx3 . I realised it now loading tracks, and then I try the ddj sx2 as well it not playing as well. What can I do please?
All its good but you only have to unplug the controller from the computer, trim to low knobs need to be at zero the fader all the left then do his procedure, once in reset mode check trim to low knobs volume need to be zero to then go thru each half point then max your see your lights come on and should go with your increases
SUMMARY FOR ANYONE THATS IN A RUSH:
1.) Remove USB from Computer
2.) Remove all Connections (but power cord)
3.) Make Sure Device is Off
4.) press Deck 1 & Shift key on left side same time & then press on
5.) Check all buttons and panels to make sure they light on
6.) Once everything is working, press both syncs at the same time
7.) Turn back on controller
Done
@@chrisvenant9720 mine deck 2 shift button doesn't show red light in the process. What could be the cause?
How do u reset the DDJ-RR? Deck 1 FX are not responding
Hi, my SX3 sound always crash nd make beeeeepppppp sound, nd comes back, any remedy for that?
That is it🔥🔥🔥
Thank you sir. Great advice 👍
my sx2 channel 2 and channel 4 is not sounding normal please what maybe the course, please i need help.
Please help me with DDJ SZ2 factory RESET
Nice one brother
Everything was wavy, until the connection from my ddj-sx recognized my MacBook. I am using a new USB adapter also. Any help would be greatly appreciated.
Channel 4 is blinking fx 2
don't use a USB adapter hub, apparently that can mess with things. hope this helps
Pls how can I off mute from my sx2 pioneer controller
Thanks this worked great
you talk too long but thanks for yhe video
My mixer for pioneer sx not working
How can you reset ddj SR need ur advice please
Thanks dude
Does this works for the ddj Sr 2?
Yes all systems
Nice one....
My sx2 still failed
I just learned that if u pres shift and (1) you can adjust the scratch disk
sir thank you! live saver
can sx3 firmware update work for sx2.i never update my sx2 from 2016.and i dont see a update for it online
Chi wit luv
Hi, pls i do i reset my DDJ S1 ? i really need it thanks.
Thank youu! Youre the best!👌🏻
Bro am having issues with my controller ddjsx3 not showing singnal on my virtual dj apple
It worked!
Nice one
Mine still not working
can you do sb3,please
I have an issue with my Ddj Sx2....I load a song on Deck B ...I lower my Fader and Move the cross fader to Deck A and it still plays ....I think my decks have inter changed
My pad mode button don't work what can I do to fix it
What advice do you have
gotta change your audio output settings
How did you go about it,,maybe has the same problem
Waoo thank you
I have sx3 whenever you try scratch it stops until you restart again..
You can't scratch even a second
Do you find out what was the problem? I have the DDJ SX and my left side platters freezing on me
2:55
Obtener my brother i need help with my Firmware installation for Ddj Sx2
mine does not work because he said to disconnect everything from the back Lol
@Obi Godson Please help me,
My Ddj SX2 when used always restarts itself every 1 hour.
What can I do to resolve it. 🙏
Brother, please help me
Chat me on WhatsApp.
+393510432504
You click the que on the right side but your crossfader is on the left. How is that fixed. You shouldn't hear nothing if your crossfader is to the left on the right side
He more than likely had the crossfader switch on the right hand deck (under that channel) on the left or thro.
You can assign any or all channels to one side or thro, if 'thro' is used the crossfader position has no relevance,
I just checked, He has all his channels on 'Thro'
How can I reset ddj 400
Sir how to reset my ddj sb3 🙏
my ddj sr deck 1 all the function switch buttons, all become hot cue
please fix the solution
please fix yourself
💪💪
My ddj sx turns on and connects with serato but the led lights won’t turn on :(
Change the cables
I have a GAIN not working I did this and the knob was showing a signal threw the platter, but still not working as it should. Anyone have any ideas?
It's an hardware issue