O7 Yukon fixed CC after watching this video. My clip was on left side and had a screw. I pulled on the screw and shoved the clip up to get it off. If you take off the screw it won't thread back on. I had to take off the bolster panel to get better access and take off the small AC duct that is also in the way. Broke the push in fastner that holds left side in place and later re attached using a zip tie. Be very attentive of how the switch comes off. It wraps around the power brake push rod and has to be slid on the same way. Getting a good light in there will help a lot. Also use some gloves as the metal beackets are sharp and will scratch your hands.
Thank you. i have a 2006 GMC canyon my cruise is not working. Today i am going to try to take off the brake switch; your tip was great. Thank you again.
Dude I lowkey love you no homo I’ve watched like 10 videos and nobody is detailed. I was stuck on the brake booster pedal I’m assuming that’s what it was and once I realized all I needed to do was move it closer to the end it went right in
I think before tearing your transmission apart you need to make sure the switch is working. Just like the power window switches that get dirty or wet they tend to stop working. It’s your knuckles, taking the cruise switch out is not easy, but it’s not hard either. If it is the switch just clean it gently and the repair is free, same with the window switches, do not buy a new set, just clean the contacts, you’ll probably see a greenish patina on the contacts that needs to go. Just be gentle, don’t take a 12 inch mill file to them.
I wasn't paying attention but I'm pretty sure my cruise control was working prior to me installing my spyder LED lights. But now it no workie, any insight if this brake light switch still probably the reason?
If you haven’t figured it out it may be the switch. You need to remove steering wheel (make sure you know what you’re doing) clean contacts on switches . This also works for windows that don’t work right, clean the switches and it’ll work like new.
Dammit! I just got a 2011 Tahoe and I thought those buttons were for a different, better option. I thought the left one was Lock on Target, and the right one was Fire Missile. So much for my dreams of eliminating those pesky passing lane crawlers!🤣
So I’ve had the problem where my brake lights stay on as soon as the truck is on, service traction and stability trak comes on after driving for a few minutes and my cruise control won’t turn on, I replaced the brake lights switch and still no fix, replaced a few fuses and even replaced the taillights with some brand new ones and bulbs, have no clue after that any help would be appreciated been like that for a few months don’t want to leave at the dealership because they charge up the ass lol
0:40 - "It doesn't set." It never will set if you're going less than 35 or 40, whatever the required minimum speed is. It certainly won't set if you're not moving.
![[ ออกกอง ] วัยหนุ่ม 2544 โลกหลังลูกกรง..ทัวร์กองถ่ายหนังใน "คุกของจริง" | JUSTดูIT.](http://i.ytimg.com/vi/vB--aOkZCpw/mqdefault.jpg)
O7 Yukon fixed CC after watching this video. My clip was on left side and had a screw. I pulled on the screw and shoved the clip up to get it off. If you take off the screw it won't thread back on. I had to take off the bolster panel to get better access and take off the small AC duct that is also in the way. Broke the push in fastner that holds left side in place and later re attached using a zip tie. Be very attentive of how the switch comes off. It wraps around the power brake push rod and has to be slid on the same way. Getting a good light in there will help a lot. Also use some gloves as the metal beackets are sharp and will scratch your hands.
Took less than 15 minutes. Checked and it fixed my crusie control.
Thank you. i have a 2006 GMC canyon my cruise is not working. Today i am going to try to take off the brake switch; your tip was great. Thank you again.
did it work?
did it work?
Thanks a lot! Very easy; from start to finish it took me 15 minutes.
Dude I lowkey love you no homo
I’ve watched like 10 videos and nobody is detailed. I was stuck on the brake booster pedal I’m assuming that’s what it was and once I realized all I needed to do was move it closer to the end it went right in
I think before tearing your transmission apart you need to make sure the switch is working. Just like the power window switches that get dirty or wet they tend to stop working.
It’s your knuckles, taking the cruise switch out is not easy, but it’s not hard either. If it is the switch just clean it gently and the repair is free, same with the window switches, do not buy a new set, just clean the contacts, you’ll probably see a greenish patina on the contacts that needs to go. Just be gentle, don’t take a 12 inch mill file to them.
Gonna give this a try on my 07 burb. Thanks
Thanks for sharing that helps me out with cruise control appreciated 👍😎
It worked for me! Thank you!
Your welcome.
To My gmc 2016 xl slt some people cut the wire harness and I don’t know how connect back again any help please
Thank Bother and may the love of Jesus Christ be always with you
No problem. Be blessed and highly favored by the lord.
I wasn't paying attention but I'm pretty sure my cruise control was working prior to me installing my spyder LED lights. But now it no workie, any insight if this brake light switch still probably the reason?
You can do away with your sound affects, I agree it’s annoying as heck!
Seriously.. Come on
Ya what the heck is up with the fake cheering..
AWESOME Job! Got'er Done here, Mamma is Happy...
Thank you
Don’t you just love it when you can fix it yourself? And save a ton of $
I got an 06 Yukon Denali I'm gonna try this fix on.
thats some production value
I got a 2005 Silverado. I changed my radio And the same week after. My cruise control started to go out and now it won't work at all. Any ideas?
If you haven’t figured it out it may be the switch. You need to remove steering wheel (make sure you know what you’re doing) clean contacts on switches . This also works for windows that don’t work right, clean the switches and it’ll work like new.
Doing a search on the number it comes out as a brake light switch. Does it also control the cruise control engagement?
Cruise shutoff
Dammit! I just got a 2011 Tahoe and I thought those buttons were for a different, better option. I thought the left one was Lock on Target, and the right one was Fire Missile. So much for my dreams of eliminating those pesky passing lane crawlers!🤣
So I’ve had the problem where my brake lights stay on as soon as the truck is on, service traction and stability trak comes on after driving for a few minutes and my cruise control won’t turn on, I replaced the brake lights switch and still no fix, replaced a few fuses and even replaced the taillights with some brand new ones and bulbs, have no clue after that any help would be appreciated been like that for a few months don’t want to leave at the dealership because they charge up the ass lol
Would be nice to know what's the name of the part
D1539j ac delco part number. It’s below in the comments but I will try to edit the post. Sorry about the inconvenience. I am still learning.
Awsome video just what i needed yo know thanks bro 👍🤙
Thank you
I have p1566 gmc yukon 2005
What should i do pls help
Thanks brother
What about if it's not the brake switch I have a 2011 Denali cannot get it working
Did you check all the fuses? Or check any connections to the cruise control under the hood?
Will it (cruise control)make your check engine light come on?
Not usually but your check engine light may disable your cruise control until the issue is fixed. Thank you
Thank You.
No problem. Thank you
🍺. ,thanks !
What is the part number I have same problem thks
Ac delco D1539J
0:40 - "It doesn't set." It never will set if you're going less than 35 or 40, whatever the required minimum speed is. It certainly won't set if you're not moving.
I can’t get the clip back in
What’s the name of the part
Brake light switch / cruise control deactivation
AC Delhi D1539j is the part number
Wats the part called.
D1539j ac Delco part number.. I think it’s called a brake switch as in the comments below. Thanks
Good vid...Thank you.
U said it was $6 a O'Reilly now $25 u funny
Rock auto is the cheapest on all parts
whats the part number?
ACDelco D1539J GM Original Equipment
Part name please
Called a brake switch but also doubles as a cruise control cut off switch. D1586h AC delco part number
@@ShoetubeTV thanks i have same problem with my tahoe was working fine but not right now thank you for you help
Fix should work, but doesn't. So now what?
bro you bumping jeffy lol
My son loves that puppet. Haha
Thanks for desirme..
What the heck with the sound effects??
You could have done without the sound effects
TH-cam how to make
I cannot get my Clip off for the life of me.
Maybe use your phone to video what it looks like up in there. I struggled with one on a Yukon but it finally just came off. Can be frustrating
Would have been nice to slow down so we could see what your doing but I guess you can't do than and be cool AF can you?
I’m the geek of the week my brother 🤪. If there something I can help with I will be glad to send a video or help any way I can.
Not funny
Can’t please them all……