You got that right......ribs are hurting from laying on the door frame and kneeling on a replacement knee is no fun either. I replaced that screw with a slotted head sheet metal screw and used about an 8" long screwdriver instead of an allen wrench.
Leave it to an American engineer. All my cars were Japanese or Korean and they were all in the glove compartment. Super easy. This is the most complicated way. Just horrible. Glad I don’t buy American!
I recently was working on my in-laws 2013 Escape. I learned one thing and that is I will never own a Ford. Everything but the brakes seems to be ridiculous.
I just changed the filter in my fiancé’s Escape. The filter that was in the car was backwards. Your video was not only helpful in showing where the filter was, but also in determining which direction the filter was supposed to face. Not really sure what the difference it makes since there isn’t a support on one side, but I did it right. Thanks!
@@tinman9093 So if both of you found filters installed backward...was that done originally or has the filter been changed before and someone other than the factory put it in backward?
@@tinman9093 Good call probably being a used car. I suppose the previous owner didn't have this great video to watch before changing it. I hope it wasn't done by someone that should have known better but in this day and age, you never know.
Third video I've watched for this task because others were poor description, no lighting. Thanks for clear instructions along with the tips and tricks.
Dear PYR Automotive and Ford... my replacement filter did not bend like this video. I did manage to find Fords little sharp pieces all in the fuse area. I'm attaching my Man-Card, as it may be invalid now. BTW, THIS VIDEO WAS GREAT! Helped me bunches. Thank you.
This video provides very clear instruction. Unfortunately it is super difficult to do yourself due to very tight and awkward location of the air filter - really bad car design to make it so difficult to change air filter.
The worst cabin air filter design Ford could have ever thought of. All the dirt gets trapped in that channel and there's no easy way to access it and vacuum it or whatever. Jeep Wrangler is worse, they don't even give you an air filter from the factory on the sport model. Prob same on other models too. Car manufacturers are scammers
Commenting to say THANK YOU for this vid! I have a 2019 Escape, and your clear, concise instructions helped me change the cabin air filter myself. $15 for the filter, and about $20 for the screwdriver set; I saved a LOT of money!
You saved me, I had a whistling noise that was loud and driving me crazy. I followed your instructions and replaced the filter. Now its virtually silent. Thanks for posting this video.
My sister has really bad allergies & asthma so im going to change out the filter on her 2014 escape. This looks pretty wonky trying to get the filter back in. But, definitely looks easier than changing the filter on my 2019 fusion. Check out a video on that. Ford definitely gets a big "F" on this design
Such BullSh*t that Ford chose to use a Torx screw to hold on the access piece. The average Joe doesn't have a Torx bit set. I'd just yank the old filter out and not put another in. Cars didn't have these filters until now. Just another government mandated gimmick.
Excellent vid.... But that fliter housing door tho.... Had to get right up in there to see of the top pin was interfering with the sealing of the door.... Ford engineering 👎... OP's video 👍
Why did they need to make those screws be a pain in the ass to get to. All the old cars I've ever changed these on popped out of a plastic holder, like a refrigerator
Only ford would design something like this! CRV is in glovebox and takes less than a minute! This and battery placement on escape is why i didn’t buy another one.
Ford makes everything difficult to do on the escapes....had to do a battery change and it was a pain to do had remove wipers just to get to the battery.....anything to get more money out of the customers
Best video ever. I put my laptop on passenger seat to replace cabin air filter on my 2019 Ford Escape SE just now. No way I could have done it without this video. Thanks, brotha! Oh. When I removed old filter, it was clear Jiffy Lube installed old one upside down, and 1/4 of it was bunched up like an accordion. Glad I can do this myself now, the right way.
This was an excellent overview, providing step-by-step instruction, and tips on what to watch for in the process. We were changing the Cabin Air Filter for our 2017 Ford Escape. Everything experienced in completing the replacement was “as shown” and (as you mentioned) inserting the new filter was the most difficult step. Much appreciated and well done with your video! 👍👍
I have a 2019 Escape and it seemed that the space was a bit more constrained. I had to do most of the work by “feel”. But I got er done. Considering the dealer wanted $60 to replace this item, I think I save myself quite a bit of money. Thank you.
Thanks for the video! Decided to change the cabin filter on a road trip due to a musty smell. Had a small biodiversity that only had flathead and Phillip so I grabbed a t20 bit with the filter at the parts store we stopped at! Thanks again!
@@PYR-Auto thanks for your reply. I bought the screwdriver as you suggested. Took out the thingy under the glove box. Looked for the screw....keep in mind....this is a 2019 Ford Escape....no screw! I was worried about it being screwed in too tight but...no screw. I did get the little door thingy off and now I'm waiting for the filter to arrive tomorrow. The old filter is fairly dirty. But, my question is: if they forgot to put a screw in there...where else on this car are screws missing?!?!? Oh well, at least I didn't have to struggle with a too tight screw 😁 The dealership said it would cost $60....I'm doing it for under $20, thanks to your GREAT video! Where should I send a tip?
Thank you, thank you, thank you. Perfectly done video. Clear. Concise. Well lit. Dealer wanted $128 to do this job. Had been searching for this how-to video & you sir, should be commended here for a job well done. TY!
Looks simple enough. My only fear is making sure the filter expands once you put it the slot. So I started to do this and noticed the cover and clips were missing. Any idea where I can buy replacement parts?
![ได้เวลา! พาน้องแฝดฉีดวัคซีนครบ 1 เดือน🫣 [cc] แดนแพทตี้ SS2 | EP.52 |](http://i.ytimg.com/vi/IzeLtaXBLNE/mqdefault.jpg)
Leave it to an engineer to put that in such an awkward spot
You got that right......ribs are hurting from laying on the door frame and kneeling on a replacement knee is no fun either. I replaced that screw with a slotted head sheet metal screw and used about an 8" long screwdriver instead of an allen wrench.
Leave it to an American engineer. All my cars were Japanese or Korean and they were all in the glove compartment. Super easy. This is the most complicated way. Just horrible. Glad I don’t buy American!
Tell me about it.
Even the battery, geez, to much job to replace it
Thank you! Now I don’t have to subject my brother to driving 3 towns over to do this for me 😂
You're Welcome! Glad it helped
I recently was working on my in-laws 2013 Escape. I learned one thing and that is I will never own a Ford. Everything but the brakes seems to be ridiculous.
Most helpful. Thank you!
You're Welcome! Glad it helped
Great demo..... Thanks!
You're Welcome!
Wow thanks👍
You're Welcome!
I just changed the filter in my fiancé’s Escape. The filter that was in the car was backwards. Your video was not only helpful in showing where the filter was, but also in determining which direction the filter was supposed to face. Not really sure what the difference it makes since there isn’t a support on one side, but I did it right. Thanks!
Glad it helped!
Just changed mine...........filter was also installed backward.
@@tinman9093 So if both of you found filters installed backward...was that done originally or has the filter been changed before and someone other than the factory put it in backward?
@@cowboycody9467 I don't know...the car is used and I decided it probably needed the filter chnged.
@@tinman9093 Good call probably being a used car. I suppose the previous owner didn't have this great video to watch before changing it. I hope it wasn't done by someone that should have known better but in this day and age, you never know.
Third video I've watched for this task because others were poor description, no lighting. Thanks for clear instructions along with the tips and tricks.
You're welcome! Glad it helped
As a woman this *almost dumbed it down enough for me. I spent 15 mins trying to put the cover on backwards. 10/10 would follow again.
Dear PYR Automotive and Ford... my replacement filter did not bend like this video. I did manage to find Fords little sharp pieces all in the fuse area. I'm attaching my Man-Card, as it may be invalid now. BTW, THIS VIDEO WAS GREAT! Helped me bunches. Thank you.
This video provides very clear instruction. Unfortunately it is super difficult to do yourself due to very tight and awkward location of the air filter - really bad car design to make it so difficult to change air filter.
The worst cabin air filter design Ford could have ever thought of. All the dirt gets trapped in that channel and there's no easy way to access it and vacuum it or whatever. Jeep Wrangler is worse, they don't even give you an air filter from the factory on the sport model. Prob same on other models too. Car manufacturers are scammers
Most be an American car thing. All my Japanese and Korean cars have it in the glove compartment. Super easy to change. This Ford is the worst.
th-cam.com/video/hbkg_DXD8fI/w-d-xo.htmlsi=J8J26v9y5zZQf9wk
This is how you change the Ford Fusion cabin air filter. Lol
Just pull the filter out and run it without one. It's government mandated crap.
Very good job showing & talking through how replace the cabin filter. 5 Stars
Thanks!
Terrible location and design from Ford
Commenting to say THANK YOU for this vid! I have a 2019 Escape, and your clear, concise instructions helped me change the cabin air filter myself. $15 for the filter, and about $20 for the screwdriver set; I saved a LOT of money!
You're Welcome! Glad it helped
What’s the name of the screwdriver set?
Agreed. Very well done. (commenting to give the algorthym a bump)
American cars are the worst. This is the most complicated way I have ever seen. (All cars after my very first were non American.)
The fact that they even have these filters is bullshit. It's government mandated crap.
terrible placement lol
Simple, concise, and no rambling. Great video!
Thank You!
Agreed. Very well done. (commenting to give the algorthym a bump)
Agreed. Very well done. (commenting to give the algorthym a bump)
Truly, made it super easy - for one of the most poorly designed vehicles in history. Bumping for algorithm, as well.
Very well done. (commenting to give the algorthym a bump)
Thanks!
You saved me, I had a whistling noise that was loud and driving me crazy. I followed your instructions and replaced the filter. Now its virtually silent. Thanks for posting this video.
You're Welcome! Glad it helped
Are the filters designed to whistle when dirty? Some furnaces do that.
WHO THE FUCK DESIGNED THIS??? What a goddamn nightmare to replace.
My sister has really bad allergies & asthma so im going to change out the filter on her 2014 escape. This looks pretty wonky trying to get the filter back in. But, definitely looks easier than changing the filter on my 2019 fusion. Check out a video on that. Ford definitely gets a big "F" on this design
Such BullSh*t that Ford chose to use a Torx screw to hold on the access piece. The average Joe doesn't have a Torx bit set. I'd just yank the old filter out and not put another in. Cars didn't have these filters until now. Just another government mandated gimmick.
Excellent vid.... But that fliter housing door tho.... Had to get right up in there to see of the top pin was interfering with the sealing of the door.... Ford engineering 👎... OP's video 👍
Why did they need to make those screws be a pain in the ass to get to. All the old cars I've ever changed these on popped out of a plastic holder, like a refrigerator
Explained well, but damn who designed this it's so hard to change lol.
Could you share the size (thread diameter and length) of the screw to fix the cover, mine is missing and want to buy a new one
not sure on that
This was the best help video I found. Step by step. Giving the 20 torx size was great. Thank you
You're welcome! Glad it helped
Ford absolutely sucks for the design of this.
I went in for an oil change and Ford offered this service for $119 lmao.
I believe it!
Extremely helpful video with attention to all small details with great video angles! You just saved me a trip to the mechanic 💪
Glad it helped!
Only ford would design something like this! CRV is in glovebox and takes less than a minute! This and battery placement on escape is why i didn’t buy another one.
Ford makes everything difficult to do on the escapes....had to do a battery change and it was a pain to do had remove wipers just to get to the battery.....anything to get more money out of the customers
Great video, thanks! The job cerainly doesn't justify Ford dealer trying to charge me $145 to do this.
You're Welcome!
Thank you. Clear directions, good sound, great lighting. Very helpful
You're Welcome! Glad it helped
Thanks for a great video showing precisely how to do this. The lighting and sound were great. Keep up the awesome work!
Thank You! Glad it helped
You the goat man
Just changed the filter on my '15 Escape, was nearly as black as the floor mats! 😨🤢
1/4 inch straight blade works on the torx.
Use it for oil change.
Good video, I'll make sure my wife watches this so she will know how to change it 😉
My wife just changed my filter this afternoon. Now she is cooking my steak. The Good Wife.
@BlackNightJack
Hmm....try this:
"Take off your shirt and make me a sandwich,"
Let us know how that goes for you.
@@BlackNightJackgood wife, good life
Best video ever. I put my laptop on passenger seat to replace cabin air filter on my 2019 Ford Escape SE just now. No way I could have done it without this video. Thanks, brotha!
Oh. When I removed old filter, it was clear Jiffy Lube installed old one upside down, and 1/4 of it was bunched up like an accordion. Glad I can do this myself now, the right way.
You're Welcome! Glad it helped!
This was an excellent overview, providing step-by-step instruction, and tips on what to watch for in the process. We were changing the Cabin Air Filter for our 2017 Ford Escape. Everything experienced in completing the replacement was “as shown” and (as you mentioned) inserting the new filter was the most difficult step. Much appreciated and well done with your video!
👍👍
Thanks! Glad it helped
Thank you so much for this extremely easy to follow tutorial.. I just changed my first cabin air filter thanks to your video!!! 🥳
You're Welcome! Glad it helped
Excellent demo, thx
You're Welcome!
Thank you. Nice job.
Thanks! You're Welcome!
I have a 2019 Escape and it seemed that the space was a bit more constrained. I had to do most of the work by “feel”.
But I got er done.
Considering the dealer wanted $60 to replace this item, I think I save myself quite a bit of money. Thank you.
You're Welcome!
Awesome thanks bro
You're Welcome!
Thanks for the video! Decided to change the cabin filter on a road trip due to a musty smell. Had a small biodiversity that only had flathead and Phillip so I grabbed a t20 bit with the filter at the parts store we stopped at! Thanks again!
You're Welcome!
Ty at work and someone from the office had this car and needed service completed with your video
You're Welcome!
Thank you. Very clear to understand. Very helpful. 👍👍Cheers
You're Welcome! Glad it helped
Great video!! Very detailed and step by step instructions. Thank you!!
Thanks!
Thank you!
You're Welcome!
Great video! Best of 4 we looked at! Complete, clear, and concise!
Thanks!
Ford has a better idea 💡 not!!!!
Great video. I think I can do this on my 2019 Ford Escape. Can that nifty T20 be bought on AMZN? I can't find one that moves like that. Thank you!!
Yes they can be bought on Amazon or most any place that sells tools will carry Torx Bits as well
@@PYR-Auto thanks for your reply. I bought the screwdriver as you suggested. Took out the thingy under the glove box. Looked for the screw....keep in mind....this is a 2019 Ford Escape....no screw! I was worried about it being screwed in too tight but...no screw. I did get the little door thingy off and now I'm waiting for the filter to arrive tomorrow. The old filter is fairly dirty. But, my question is: if they forgot to put a screw in there...where else on this car are screws missing?!?!? Oh well, at least I didn't have to struggle with a too tight screw 😁 The dealership said it would cost $60....I'm doing it for under $20, thanks to your GREAT video! Where should I send a tip?
Thank you, thank you, thank you. Perfectly done video. Clear. Concise. Well lit. Dealer wanted $128 to do this job. Had been searching for this how-to video & you sir, should be commended here for a job well done. TY!
Thanks! Glad it helped
Very helpful video, no nonsense but everything I need to know to do the job, thank you.
You're Welcome! Glad it helped
What happens if you put the carbon filter backwards?
it won't hurt anything the filter just won't last as long and may not work quite as well
Great video thanks for this. The instructions very precise and easy to follow
You're Welcome! Glad it helped!
Gracias mister muy bien explicado
Thank you for very clearly showing this. I appreciate it. 😊
You're Welcome!
Excellent video, thanks so much!
You're Welcome!
Clear and precise instructions - very helpful. Thank you.
You're Welcome! Glad it helped
directions great lighting perfect thank you
Thanks!
Thanks , very helpful,.
You're Welcome!
Informative, very helpful. Thank you.
You're Welcome! Glad it helped
Great video! Was able to do this on my own!
Nice!
Thanks for your help.
You're Welcome!
thanks bro!!! Helpful.
You're Welcome!
Thank you for the clear video.
You're Welcome!
Thanks great video
You're Welcome!
Great video and explanation of the steps required.
Thanks!
How often should this be done?
in general its recommended to change them every 10,000-15000 miles or about once a year but I usually just go off of how they look.
Great video
Thanks!
Thanks!!!
You're welcome!
Good job 🙂
Thanks!
Sooo easy!! Thank you
You're welcome!!
Looks simple enough. My only fear is making sure the filter expands once you put it the slot.
So I started to do this and noticed the cover and clips were missing. Any idea where I can buy replacement parts?
Having trouble putting the cover back on
Never mind, I got it! Stupid me was trying to put the cover on backwards
Glad you got it figured out!