Limebug - VW Beetle / Ghia Rear Bolt on Air Ride Kit Install Guide The Revolution Cantilever
ฝัง
- เผยแพร่เมื่อ 28 มิ.ย. 2024
- Product:
limebug.com/shop/suspension/v...
Limebug Gen-II Revolution Rear Air Ride Kit for Volkswagen Beetle / Karmann Ghia Installation Video (Swing Axle)
Install Information:
- Model: 1963 VW Triplegreen Beetle Sedan
- Heat Exchangers and Heating System remain in place (The only air ride kit this is possible)
- Swing Axle and IRS Compatible
- Body, Transmisson and Engine-in Installation
- 100% Bolt on
- 6 Volt Electrics, video showing installation with 6V Starter Motor in place (however we recommend installing 12V)
00:00 - Intro to Aircooled VW Air Suspension
00:25 - Stripdown of Factory Suspension
02:35 - Installation of the Air Ride Kit
13:45 - Initial Setup Information
14:34 - Limebug Air Ride in Action - ยานยนต์และพาหนะ
It's a nice setup and seems like quality parts. I personally would have rather an instructional video with people talking than watching someone assemble the system with music in the background.
Thankyou for the comments, we are looking to doing a "body off" install verion where hopefully we will be talking through it in person.
Got my kit two weeks ago. Can't wait to put it in. Great quality and worth every penny
Thankyou for your kind support, can't wait to see it fitted!
@@LimebugVWhow much for the kit
@@caydenshorter7728 Pricing and Specs all available on here, just let us know if you have any questions! limebug.com/shop/suspension/vw-aircooled-air-ride-aircooled-airride-beetle-bug-ghia-trekker-type3/rear-air-ride-kits/
Siete i numeri uno 👏🏻👏🏻👏🏻
Thankyou!
It's nice
Cool
Very nice! 🤙 🇺🇸
Thankyou buddy 😎
lindo trabalho parabens
Obrigado, muito gentil da sua parte
🔥🔥🔥 😃
I been lookn for spacers like those
We can help!
It is a nice kit. Looks like it is simple to install stale but from the looks you lose the use of your heater boxes. Is there a way to keep them functional.
Hi there, thankyou for the comments, this car is actually still running its factory heaters and are fully functional. This is one of the key elements that makes our air ride kit unique.
Very nice looking kit, looks very high quality, by the way what wheels are on the bug at the end of the video?
Thankyou John, they are our 6335 custom 3-piece wheels made for this car. It is a very cool car and incredibly solid considering it has lived in Canada and Europe most of its life
Great product, design, engineering, install, execution, video, tutorial & editing
Will it fit 914s, 914/6, Ghias
How much 3 kits shipped to Nor Cal ?
🚗💨💨💨
Thankyou so much!, very kind of you, we can ship 3 kits (rear only) for around $120USD per box currently via UPS. Each kit is 1 box, so $360 approx, thanks again!
🤙 🇺🇸
Could this work on a 356 Porsche ?
Any promo codes for Limebug? Awesome kit
Thankyou dude, unfortunately no codes I'm sorry :(
@Limebug will this only fit with stock height trans. My trans and engine were raised 1" I'm guessing the cross over section and for cables there is not enough room?
This kit will work with 1" raise, yes. There is enough room. Kind Regards Limebug
Great stuff. Will you be releasing a IRS install video? Thanks
Yes there will, the installation is almost identical to this with just the front hangers the opposite way round and two lower cups which drop into the IRS arm.
Great to hear. Looking forward to it. 👍🏼
@@LimebugVW hoping you could help with a question. I’m working on a 67 bug on a 73 pan. I’d like to run a swing axle set up. Would you know if a swing axle trans, axle tube spring plates would bolt up to the pan/chassis thank you
@@mtbsunday4649 Hi there, yes they will just bolt up if you unbolt the IRS arms, you can fit a swing axle rear axle, nearly everything is the same. IRS Chassis have only a few differences such as a scallop in the chassis gearbox horns and a slight positional difference to where the handbrake cables exit however this will not affect you going from IRS to swing axle, hope that helps!
@@LimebugVW thank you very much! this helps big time!
Would this kit work on a 68 swing axle
Yes this works on a 1968 Swing Axle Chassis
tem esse kit para Kombi (Microbus, or VW Bus)?
Yes we offer T2B Kit on our website also, T2A kit ready early 2024
Nice bro why not any download offline option to watch bro please
Unfortunately we don't have that option, if you would like a copy though we can send via dropbox
donde puedo comprar un kit para mi vw 72
Oui ce système fonctionnera avec votre 72, lien vers le produit dans la description
Can you not run stock heater setup with this?
Yes it is running heaters, this car is still running its full original heat exchanger and heater system.
@LimebugVW that's cool. At one point in the video, it looked like the heat exchangers to cabin tubes wouldn't be possible to fit.
@@GT.Bugger Ahh ok, this is one of the big pro's of our system. It does not require the heating system! as well as being compatible with 6volt starters (like this car also) and both swing axle and IRS models
What kind of rims are those?
limebug.com/product/17-6335-3-piece-split-alloy-wheels-5x205-pcd-each/
What wheels are thoes
limebug.com/product/17-6335-3-piece-split-alloy-wheels-5x205-pcd-each/
Damon explain what they doing all they doing is playing
Price price price !!! Please lol
limebug.com/shop/suspension/vw-aircooled-air-ride-aircooled-airride-beetle-bug-ghia-trekker-type3/rear-air-ride-kits/
Neat project, most annoying soundtrack
for what?
FIts Beetle, Karmann Ghia, Type 3, Razor Edge, Trekker, Thing and Variant
@@LimebugVW but why?
@@alchemik2010 Is the next question How?