That's another video after the put the truck back together that rolled down a cliff and burst into flames after the explosion. That was mean I'm sorry. given what they have to work with they do pretty good.
I was with OSHA as a trainer for about 12 years and believe me watching these guys puts a lump in my throat you have to give them credit though they are pretty good machinist.
What I want to know is how in the hell do you prpperly weld the coolant passages you can't get to. There is no way that head won't leak coolant internally after this so called repair.
I'd like it better if they cleaned the metal before brazing. Lots of folks on Forged & Fire have lost trying to forge weld dirty, greasy metal. Why lap the valves and not mark them for the same hole??
Pienso lo mismo, una cosa es hacer lo que hicieron que parece una reparación satisfactoria, lo correcto armar el motor y someterlo a trabajo. Y de esa manera saber si lo que se hizo es lo correcto.
Met an old farmer turned machinist/welder. He had an old cast motor that he welded more times than anyone should be able to weld. He said he used to pour 🫗 in the metal and recast it. And then weld and machine it back to what it is supposed to be. After a while, he just welded the cracks and heat treated it. It was more weld metal than cast. But he said they just don't make them like this anymore and better to fix what can not be created again than to use what breaks every hour. Much ❤
Congrats for all these skilled men.👏But unfortunately;the welding of cast aluminum materials are not safe for a long time.Because of impurities and small differences of the qualities between welding materials and main body.The high temperature of the engine causes different expansions to the different material of the welding parts which will cause inevitable cracks. So,this kind of fixings are not durable for a long time..😥
@@nick1234567891231didn’t look like it. There’s rust in the water jackets indicating iron or steel, not aluminium. Oxidised aluminium is a white salt like material
I’ve seen it broken in tw, there’s no way to access the areas that need welding together. This may fool some but not all. You’d never trust it anyway even if they could somehow get inside to weld all the places that they missed.
That never going to leak up the bolt holes be flat and true well done for a great idea to pass the time on ytube you done well and next week your using a cola cans for a crankshaft 😂
I love how it has cracked perfectly at the middle :D EDIT: And also I love how they didn't weld inside the exhaust ports so them exhaust gasses can mix with water all day long.
For what ever reason this broke in half ,? As you say all sides have been welded, top bottom, not the internal part of the head, this won't last 5 minutes when titaned down
Got to give the young boy props seems like he went out and found work and upon returning it seemed to be his dad wasn't up to the task the way he was acting towards I assume is his son.
Die Manager der deutschen Autoindustrie sollten sich dieses Video ansehen. Es wird nicht lange dauern, und unsere Fachkräfte wären froh, wenn sie das auch könnten.
Boy that's a small wheel to run on the surface grinder like that I'm surprised it's still good and strong it's got a strength on that size. I be using a much bigger wheel and a cover to protect that thing. In case it came out flying the kids should have safety goggles on because that throws out pieces of fragments of metal when it's grinding and everything. Thank you. Good thing OSHA doesn't go there. They close that whole place down on that one.
😀❤️🙏👈 thanks friend for liking my response. What I said about the small grinding wheel when it was grinding the engine block down to specifications again thank you.
Что только не сделаешь ради миллионов просмотров! То коленвал сваривают из частей, теперь вышли на новый уровень - сварка гбц из частей! Что же будет в третьей части? А блок MAN D2066 или DAF-105 по коренным постелям восстановить слабо?
I'm not even gonna read the comments because I know what they'll be saying. But, to all the naysayers, do some research and find the guy who welded 6 segments of 351 Cleveland head together and put this assembly on a 300 inline 6 and raced it. Possibly Hot Rod or Engine Annual from the late '70s. Another guy did it with a Chevy 292 and the name of the article was Ten Second Six.
I've never saw a coal lump on this shape and color before. Interesting work, very low tech. My father had a 6 cylinder inline, it is common for the top part to " banana " shape and lose compression on 1 and 6.
Sinceramente as vezes fico impressionado com o trabalho de vcs mas aí é demais soldar um cabeçote?? em primeiro lugar como esse cabeçote partiu isso é praticamente impossível..e outra coisa é as galerias de água.nao tem como soldar por dentro.esse cabeçote não vai prestar pra nada vai pro lixo...gosto demais dos seus vídeos mas esse eu não acredito!!
It's a bullsh!t video mate, they do these type of videos to make money from youtube, remember a bowl of rice a month is luxurious living in that sh1th0le
You’re very true about Cas aluminum welding pieces however, these heads aren’t casual in their cast-iron and you can look at it and tell the iron is crystallize. It’s it’s not gonna work out for him. They’ll get some use out of the motor maybe 10 hours or so, but that’s about it and it’s gonna go again.
One more comment. I'll leave running the surface grinder like that. I'll be using a special coolant on the block to keep it cool and the finish I think would look a lot nicer than running it dry like that thank you.
![ร้อยพ่อพันแม่ - WanMai [Official MV]](http://i.ytimg.com/vi/XY2pNYASEbg/mqdefault.jpg)
Heat treating in a cow patty oven simply puts you WAY ahead of the competition!
I love how you can see the handprints in the patties.
not only that the way thay find were to drill the new hole is priceless ,, wonder how it worked out in the end =P
That is not heat treating. It is preheating.
@@Syrnian This is correct. I assume those welds wouldn't hold or be effective on a cold block.
Thats got to smell real good when cooking.
Give us a follow-up video of them putting it on the block and running the truck lmao!
That's another video after the put the truck back together that rolled down a cliff and burst into flames after the explosion. That was mean I'm sorry. given what they have to work with they do pretty good.
This welded cilinderhead will be fitted on a welded cilinderblock and will be a perfect boat anchor
3rd world engineering
Я ИНЖЕНЕР МЕХАНИК, МОЙ МОЗГ ОТКАЗЫВАЕТСЯ ВСЕ ЭТО ВОСПРИНИМАТЬ
😂😂😂
Это на столько абсурдно, что даже восхитительно))))
Наверное автослесарь спросил - вам для себя или на продажу? :-)
@@__AleM__ Так это для себя) На продажу был бы суперклей)
Мамкин перекуп 😂
Так то самосвал на дороге ждет эту гбц, она лопнула от перегрева
I'm 75 and this reminds me of my grandfather's workshop.
الم تمل من الحياة وتجد انك عشت كثيرا ؟
I'm sure your grandfather would have bought a new one =)
Gözlerime inanamadim. Resmen tezek yakıyorlar. Vallahi Bravo diyorum.
I was with OSHA as a trainer for about 12 years and believe me watching these guys puts a lump in my throat you have to give them credit though they are pretty good machinist.
Its not meant to work, its meant to get views and comments, looks to me like its successful !
Maybe but that is a heckuva lot of effort to go through for TH-cam views. Maybe they sold it on Ebay.
Those 2 Indians must have gone to the Indian School of Dramatic Arts! I love it !
What I want to know is how in the hell do you prpperly weld the coolant passages you can't get to. There is no way that head won't leak coolant internally after this so called repair.
It’s not repairing process it’s just welding two pieces …
So why go to all that hassle, when the head is essentially useless.
Just for show?
@@SpenceHayterclicks. These type of videos earn money for them. More than actual real job do.
@@SpenceHayterclikbait
My thoughts exactly
The acting at the start deserves an Oscar!
Thanks 🙏
*Love the cow dung patty preheat.*
Love the safety sandles and the cow pie oven
Taking bets on how long the valve seats next to the weld stay in.
Those are sacred cow pies....
Good be people pies!!!???
The sandals are OSHA approved
Solche Spezialisten suchen wir in Deutschland !!!😂
Waw! Bravo,acum il puteti duce la fier vechi!
The end of the clip should be him flying it back to the owner like a magic carpet.
It's got about that much chance of working.
hahahahaha ,,, well said !!!
I'd like it better if they cleaned the metal before brazing. Lots of folks on Forged & Fire have lost trying to forge weld dirty, greasy metal. Why lap the valves and not mark them for the same hole??
@@donnienicholson6062 Because its all BS.
It can never work because the coolant passages would leak.
Lmao that felt great
I love the kid's steel toed bathroom slippers.
ما شاء الله تبارك الرحمن بارك الله في عمرك ابني العزيز وحفظك من كل سوء❤❤❤
Муфельная печь из коровьих лепешек творит чудеса.
С нетерпением жду вторую серию этого фильма, где после установки на двигатель эти мастера за качество ремонта отвечают))
Pienso lo mismo, una cosa es hacer lo que hicieron que parece una reparación satisfactoria, lo correcto armar el motor y someterlo a trabajo.
Y de esa manera saber si lo que se hizo es lo correcto.
Они ещё и гарантию дают
😮😮 SPECIALIST !! Top Work, perfect, master piece ....😊😊😊
Very ❤️ hades 💕work 👍 good information 👌
Я понял, в чем главный секрет успеха ремонта - надо иметь много коровьих лепешек!
КИЗЯК - ЭТО СИЛА!!!!!!!
В деетстве на ночную рыбалку, через выгон, насобирем , и тепло,(сети трусишь то в бродяка) и камаров отгоняет
Из говна и палок - в прямом смысле :-)
@@__AleM__ ДА!
А внутри он не заварил ..... фуфлогон 😊
What I find hardest to believe, is that he is not wearing sandals.
Super jest to odrestaurowane ta głowica od samochodu Pozdrawiam serdecznie. 👍👍👍👍👍
Met an old farmer turned machinist/welder. He had an old cast motor that he welded more times than anyone should be able to weld. He said he used to pour 🫗 in the metal and recast it. And then weld and machine it back to what it is supposed to be. After a while, he just welded the cracks and heat treated it. It was more weld metal than cast. But he said they just don't make them like this anymore and better to fix what can not be created again than to use what breaks every hour. Much ❤
Thats It, I'm getting myself a lathe and flip flops and start my own machine shop
If you look at the valve seats you can tell this was a junk head that they just broke to make another fake video .
Thanks 🙏
maybe, seems like a strange place to break, yet video not fake, he did weld it up
@@dont-want-no-wrench It will never work. Head is bent. Still fake .
Obviously contrived, but maybe done as a training exercise?
They are the best craftsman and you could never find anyone in the US that could even do the same.
Wonderful work.Very surprising? Keeping up.Really Wonderful!
Congrats for all these skilled men.👏But unfortunately;the welding of cast aluminum materials are not safe for a long time.Because of impurities and small differences of the qualities between welding materials and main body.The high temperature of the engine causes different expansions to the different material of the welding parts which will cause inevitable cracks. So,this kind of fixings are not durable for a long time..😥
Is it aluminum block ?
No está soldando hierro fundido, es ALUMINIO, y lo hace con pocos medios pero un gran profesionalidad.
Perdon es hierro fundido.
That's why they heat treated in a cow patty oven.
@@nick1234567891231didn’t look like it. There’s rust in the water jackets indicating iron or steel, not aluminium. Oxidised aluminium is a white salt like material
I’ve seen it broken in tw, there’s no way to access the areas that need welding together. This may fool some but not all. You’d never trust it anyway even if they could somehow get inside to weld all the places that they missed.
we don't use this head but. it's just a welding project
Покрасить забыли
@@DiscoveringSkillsэто просто чтобы снять контент?
@@DiscoveringSkills so you set up 'work' for the tradesmen, pay them the going rate and then upload it to TH-cam and make a killing?
That chair with the 6 inch legs. 😂😂😂
That never going to leak up the bolt holes be flat and true well done for a great idea to pass the time on ytube you done well and next week your using a cola cans for a crankshaft 😂
I’m more amazed that he could carry that head on that motor scooter….
Yes, that was the best part.
Impossible repair, how about the water jacket????
И я об это же подумал,как будет внутри водяной рубашки..?))
Don't need no stinkin water jacket! Lol!
Don't try this at home!,HA ,HA, HA
ماشاء الله تبارك الله عمل ممتاز الله يبارك فيك يا رب العالمين ❤❤❤❤❤❤❤
I love how it has cracked perfectly at the middle :D
EDIT: And also I love how they didn't weld inside the exhaust ports so them exhaust gasses can mix with water all day long.
Fella done his best considering, just trying to survive in very very trying circumstances, good luck to them all ! ...... they'll get there.
*Cool.....I think they can even weld wood*
How did it break in two pieces.A small gasket leak will overheat the car,but running the vehicle till the head broke in two pieces.I must say amazing.
Quality casting using the finest iron found on the side of the road.
It didn't, someone pre-cut it, then snapped what was left in half.
They split it with a sledgehammer to have two pieces and make a video. I want to see a video of laundry day.
@@larrymaloney877you'll never see that, it doesn't exist. Imagine the smell of the homes...
Vrhunski ste majstori! 👏
Well, you got welded the four sides reachable from outside, but the inside broke surfaces remained unwelded...
Very good work !!!
Before I even watch this, is this better than the one where they weld together a cracked bearing?
Bravo ! Vous êtes très😀 bon !
오평파 보다보니까 풀영상이 알고리즘에 나오네 감사합니다 백아무개
So.... theyre welding the top bottom and sides but the internals are going to be absolutley shot ? what a pointless exercise.
For what ever reason this broke in half ,? As you say all sides have been welded, top bottom, not the internal part of the head, this won't last 5 minutes when titaned down
This is called jughar in Pakistan
Imagine doing this on a street in London, Paris or New York etc.
Thanks 🙏
Or Southhall. .....oh wait
The way our governments are behaving it’s only a matter of time.
El conentario idiota........!
The steelbrush has seen better days ...
Got to give the young boy props seems like he went out and found work and upon returning it seemed to be his dad wasn't up to the task the way he was acting towards I assume is his son.
It's pretty handy that they have all those "repaired" heads that came back as rejected to use for fixturing future head repairs.
С такими технологиями человечество уже бы вымерло
Die Manager der deutschen Autoindustrie sollten sich dieses Video ansehen. Es wird nicht lange dauern, und unsere Fachkräfte wären froh, wenn sie das auch könnten.
Boy that's a small wheel to run on the surface grinder like that I'm surprised it's still good and strong it's got a strength on that size. I be using a much bigger wheel and a cover to protect that thing. In case it came out flying the kids should have safety goggles on because that throws out pieces of fragments of metal when it's grinding and everything. Thank you. Good thing OSHA doesn't go there. They close that whole place down on that one.
😀❤️🙏👈 thanks friend for liking my response. What I said about the small grinding wheel when it was grinding the engine block down to specifications again thank you.
This is hilarious. 😂😂😂😂😂😂
Первый раз увидел женщину! Она вышла из дома, справа , 4.10 👏👏👏👏
косяк!!! будет наказана...
@@user-gw2pb7ts3t да, выдал я тётку 😒😨
Что только не сделаешь ради миллионов просмотров! То коленвал сваривают из частей, теперь вышли на новый уровень - сварка гбц из частей! Что же будет в третьей части? А блок MAN D2066 или DAF-105 по коренным постелям восстановить слабо?
Конечно,что ты.Маленько покумекают и выправят дефект.
I'm not even gonna read the comments because I know what they'll be saying.
But, to all the naysayers, do some research and find the guy who welded 6 segments of 351 Cleveland head together and put this assembly on a 300 inline 6 and raced it. Possibly Hot Rod or Engine Annual from the late '70s.
Another guy did it with a Chevy 292 and the name of the article was Ten Second Six.
Люди уже давно доменную и мартеновскую печь придумали, а тут оказывается еще есть печь на навозе которая головки блоков может реанимировать))))))
Like others have said, the head having valve guides inserted and valve seats worked on is now the one which was welded together.
How did that not fall off @2.46!! Good to see you making money as entertainers rather than engineering.🤭
воистину, "голь на выдумку хитра", но это я пишу с большим уважением к их труду!
Главное не перепутать лепёшки с блинами кутузов😅👍
Looks great
Saludos cordiales desde ARGENTINA BAHIA BLANCA 👍👍👍👍👍👍👍👍🇦🇷
Thanks 🙏
Belül a vízteret meg majd én meghegesztem.😀😀😀
I've never saw a coal lump on this shape and color before. Interesting work, very low tech. My father had a 6 cylinder inline, it is common for the top part to " banana " shape and lose compression on 1 and 6.
Meu amigo, o dono do caminhão conseguiu quebrar um cabeçote 😂😂😂 impressionante 😅
Can you imagine bring that head to any British, American or in fact anywhere but there and not be laughed out of the shop . .
Удивительные люди!
видел такой ремон ))) и удивление человека который этим занимался в момент смешивания масла с охлаждением
Sinceramente as vezes fico impressionado com o trabalho de vcs mas aí é demais soldar um cabeçote?? em primeiro lugar como esse cabeçote partiu isso é praticamente impossível..e outra coisa é as galerias de água.nao tem como soldar por dentro.esse cabeçote não vai prestar pra nada vai pro lixo...gosto demais dos seus vídeos mas esse eu não acredito!!
It's a bullsh!t video mate, they do these type of videos to make money from youtube, remember a bowl of rice a month is luxurious living in that sh1th0le
Hotdogs over a cow patty fire anyone? This is beyond comical. At least he is getting views.
I bet that is a real shitty fire
Desde luego , esta gente arregla cualquier cosa. Son fenómenos.
Gracias
The phenomenon is that you believe this 😅
Amazing 👏
20:24 perfekt plan geworden! 😂
Я думал что они на металлолом отвезут 😂а тут оказывается такоееее😊
What a waste of two perfectly good door stops
ГБЦ закрепить на блоке , и на нём одну сторону проварить ,так будет точнее.👌👍
MR. foreman has a ring like a maharaja .😃
You’re very true about Cas aluminum welding pieces however, these heads aren’t casual in their cast-iron and you can look at it and tell the iron is crystallize. It’s it’s not gonna work out for him. They’ll get some use out of the motor maybe 10 hours or so, but that’s about it and it’s gonna go again.
Masha Allah Undah 🤌🏻
those dung patties have hand prints. how creative
I liked the surface grinder
Dang, I missed the welding of the water jackets and the runners.
It will crack on the 1st crank.... A diesel engine head.... Woah....
Школяр ваще доставляет))) Радует)) Интересно у него был такой предмет как материаловедение?))) А химия?)) Супер круто! Дедовский метод мать его))
Yusuf repairs a cast iron cylinder head with cow dung 😮 😁😅
Best scene when he see it first time 😂
I didn't see a cow. What was the guy on the folding chair for?
Amazing skills ? Vorrei vedere quante ore dura una testata cosi ! Video fasullo , sarebbero pazzi a montarla su un motore
I don't think that's the same cylinder head at the end of the video... you can't see the "repair" on it.
It’s same boss ❤️
@@DiscoveringSkills Uh...No it's not
Karigari ka jawab nahi 😅
Looks like a barbeque!
I guess the fire was used to pre-heat the work piece before brazing. I have to wonder about the structural integrity of such a repair.
Mengunakan kawat merek apa ya kalo las blok
One more comment. I'll leave running the surface grinder like that. I'll be using a special coolant on the block to keep it cool and the finish I think would look a lot nicer than running it dry like that thank you.
How is brazing the outside seal the inside water jacket?
Minor technicality.
Belíssimo trabalho
Они на Ютубе зарабатывают больше чем на таком ремонте 🤣🤣🤣👍
I guess it's the low man on the totomen pole that has to go out and gather the cow patties!!!!!
Any job is better then NO job!
Especially since they gather them fresh
Maybe Mustafa from the neighboring village will believe it...
Yess the inside of the jackets as well May be a Liquid Metal pour and the jackets covered. May be drop test for the weld