Good job 👍 I’m been thinking about this swap for years for my 88TC. I’m just wondering 💭 about the lower bolts for the bracket to the frame where you installed the steel plate inside cause you didn’t like the idea of drilling straight through the frame and crushing it, well I agree with you on that but my question is: If you were gonna do this again, would you do it the same way or would you install two steel tubes inside the frame and bolt is straight through the frame so it won’t crush and most likely give it more strength instead of the plate that only bolts to the lower part of the frame?
Would absolutely do it the same exact way. Only because it’ll be like factory and also no going in your trunk to unbolt it every time. Then no wholes in your carpet or bolt poking through.
@@StangDomination okay, I was able to locate a 04 cobra rear end and I'm ready to have it shipped. The issue I dont have a garage. I've been asking around to see if I can rent a place, but nothing is coming up. Not to mention the learning curve to install this thing. Do you guys have room/time to help me out? I'm willing to pay for the labor.
Does irs suspension add more weight to the Foxbody? I was reading articles that it adds 150 lbs more? Don’t know much about it and not sure how true that is.
I'd definitely order em your set up was awesome if you get time check out premium fuel mag on youtube he has a similar set up but not as clean as yourz gud shit bruh real talk. I watch all you guyz vlogz daily cuz gud shyt bruh gud shyt.......
We’ll check em out and Appreciate that thank you we’ll hopefully have some for sale this year and just wait till the finish product when this thing hits the ground
This one came from a 03 cobra. Not sure if it would fit because the fox chassis is 79-04. Haven’t checked into it enough to give you a for sure answer. If could be as simple as adding some brackets or removing. But on the other hand might be to wide. We would have to check a s550 out and go from there
Y’all bad ass ! I dig the vids subscribed !
Appreciate the love. 🤙🏽 thank you
Wish y’all all the luck cool to see channel growing
Much appreciated thank you 🤙🏽
Good job 👍
I’m been thinking about this swap for years for my 88TC. I’m just wondering 💭 about the lower bolts for the bracket to the frame where you installed the steel plate inside cause you didn’t like the idea of drilling straight through the frame and crushing it, well I agree with you on that but my question is: If you were gonna do this again, would you do it the same way or would you install two steel tubes inside the frame and bolt is straight through the frame so it won’t crush and most likely give it more strength instead of the plate that only bolts to the lower part of the frame?
Would absolutely do it the same exact way. Only because it’ll be like factory and also no going in your trunk to unbolt it every time. Then no wholes in your carpet or bolt poking through.
Great welding. Looks gold to me!
Flow tube
?
The part of the exhaust with the flange that was missing. It's called a flow tube lol
Ohhh ok ok got chu Appreciate that lol was lost for a second
Do you have problems out there in cali getting built stoker engines to pass smog ?
Y’all are killing it fam. Keep it up
Appreciate it thank you and always
Clean as notch! Nice welding
Appreciate it
You guys are always putting in work. I love the content..ALWAYS
We appreciate it. Love showing people what time and work that actually goes into these Stangs
How much do y'all charge for this? I want to get mine done.
Depends on what all you need done but just swapping like oem could run 1500 +
@@StangDomination that's not bad as I thought.
@@StangDomination okay,
I was able to locate a 04 cobra rear end and I'm ready to have it shipped.
The issue I dont have a garage. I've been asking around to see if I can rent a place, but nothing is coming up. Not to mention the learning curve to install this thing.
Do you guys have room/time to help me out? I'm willing to pay for the labor.
Clean looking coupe. Great videos like always keep it up.
Thank you
Does irs suspension add more weight to the Foxbody? I was reading articles that it adds 150 lbs more? Don’t know much about it and not sure how true that is.
It is heavier, not sure the exact numbers but the irs has better road coarse handling than the sra
Doing a irs in my ‘93 coupe. Nice to see the process.
How did you make out?
Looking good guys what year that IRS from.
Chris Griswold this one came from a 2003 cobra
@@StangDomination I have been trying to fing a IRS for sometime now with no luck. How much did that cost.
Will do keep up the gud work bruh u got my subscription loyal fan cuz.....
Most def and appreciate that Fr
Glad Brew shouted you out. It'll be nice to continue to part 2 and 3 tomorrow (bed time).
Haha we know how that is, click on one vid and it turns to 3. Appreciate it and welcome to the channel
Dang y’all awesome work! Can’t wait to see the ending!
Appreciate it brotha
Was the irs swap worth it? And how has it held up?
Ohhh yea way more smoother on the turns
@@StangDomination did you do the break upgrade from the Cadillac on the irs or is there a better way to go???thanks
I'd definitely order em your set up was awesome if you get time check out premium fuel mag on youtube he has a similar set up but not as clean as yourz gud shit bruh real talk. I watch all you guyz vlogz daily cuz gud shyt bruh gud shyt.......
We’ll check em out and Appreciate that thank you we’ll hopefully have some for sale this year and just wait till the finish product when this thing hits the ground
Whats your turn around time for something like this..
About 3 to 5 days depending on if there’s any speed bumps but that’s entire 5 lug swap
Bet....appreciate it
No prob
Got some magnaflow irs mufflers if ya’ll want em ain’t gonna get used I’m trying to find some Bassani
Offset mufflers
In San Diego?
Naw Stockton ca I have you guys on ig _str8tothetop if you want to try and figure something out dm me
Tyrell Hamilton wait are we talking about a donation here lol?
Yup, unless you guys don’t like donation of some mufflers 🤷🏽♂️lol
Awwww cuz i forgot to mention about the cadillac calipers did yall order em or just go thru dah dealer ima try dat
Hit amazon. They going up in price. Gotta hop on them fast
Any difference between the 99-01 and 03-04 irs?
Half shafts, diff and gearing
03/04 cobra Half shafts are stronger than 99-01 cobra
@@StangDomination oh ok thank you
So is the irs same with as running a 8.8 out of like. 94-95 sn95 gt? Man I need me one those carts !!!! Lol
Yea pretty much. 94/95 may be a tad bit shorter but not really noticeable
I did a 2018 it's in to a 2006 easy swap
Went straight up?
Ehhhh car had a fuel cell in it already only thing I could see being a problem if some one was to do it on a stock tank setup.
What year is the new rear end out of? Have you done a 2015 or newer IRS swap?
This one came from a 03 cobra. Not sure if it would fit because the fox chassis is 79-04. Haven’t checked into it enough to give you a for sure answer. If could be as simple as adding some brackets or removing. But on the other hand might be to wide. We would have to check a s550 out and go from there