1/144 HGUC Zaku II High Mobility Type Shin Matsunaga Custom

แชร์
ฝัง
  • เผยแพร่เมื่อ 17 ธ.ค. 2024

ความคิดเห็น • 102

  • @coleviloria3800
    @coleviloria3800 4 ปีที่แล้ว +127

    It’s a shame we never got Dozle Zabi’s Zaku II as a HG.

    • @AlanKer2001
      @AlanKer2001 4 ปีที่แล้ว +6

      Maybe they will release it as p bandai.

    • @snukastyle
      @snukastyle 4 ปีที่แล้ว +7

      Yeah, the're re-releasing the MG this month (unless it's a new version of the 2015(?) kit). I'd LOVE a HG.

    • @paakdisayaniyom
      @paakdisayaniyom 4 ปีที่แล้ว +9

      Maybe Bandai should​ sell this as HGUC Zaku 2 Dozle Zabi​ Custom/Royal​ Guard​ Type.​ (as seen in Gundam Thunderbolt episode 5)​

    • @lilruss15
      @lilruss15 4 ปีที่แล้ว +6

      Maybe for HGGTO, that's our bet

    • @HeadCannonPrime
      @HeadCannonPrime 4 ปีที่แล้ว +6

      OMG YES!! Also, M'Kuve's gouf would be awesome too. I wouldn't mind a new version of Garma's Zaku FS either.

  • @challacustica9049
    @challacustica9049 4 ปีที่แล้ว +19

    I absolutely love your "Technical Problems" images. Aegis eating Strike is the best.

  • @porkflaps4717
    @porkflaps4717 4 ปีที่แล้ว +12

    Built up the Hrududu and Primrose for a couple Hazels this week. Stoked I was finally able to get the kits

    • @vali6717
      @vali6717 4 ปีที่แล้ว

      I rewatched the Hazel Madness series recently came up with my own High Mobility Artillery based on the Hazel Sniper. It is such a good thing we have so modular kits that are still getting directly compatible attachments.

  • @paakdisayaniyom
    @paakdisayaniyom 4 ปีที่แล้ว +31

    We want HGUC Dozle Zabi's Zaku​ 2!!

  • @Jcc2224
    @Jcc2224 4 ปีที่แล้ว +10

    Let's hope the new HGUC Char's Zaku II we're getting opens up the window of some revives of these older Zakus, as well as ones still in need, such as Dozle's.
    I really like this kit but it's one of my least favorite HG Zakus. The articulation just leaves so much to be desired. The shoulder sticker sucks too, but I've found that using the four-piece stickers and cutting off the parts that would wrap around the inside of the shoulder pad is probably the best way to do it. Great review man!

  • @Blockio1999
    @Blockio1999 4 ปีที่แล้ว +7

    1:30 pruple and yellow on the yeet hawk

  • @ZeraTheRedRogue
    @ZeraTheRedRogue 4 ปีที่แล้ว +4

    I'm a sucker for the Wolf of Solomon, but I'm holding out for the Master Grade version. I've been buying only the 2.0 or 3.0 versions of these kits for the last couple years and I really don't think I could go back to the other versions, even though there are SO MANY High Grades. I get really tempted just because of the variety available.
    Crimson Lightning's MS is pretty sweet too, I love the leg-thrusters on his Zaku.

  • @gmsloep
    @gmsloep 4 ปีที่แล้ว +4

    If you want the backpack flaps to move, consider picking up the RealGrade High-Mobility Type Zakus. Johnny Ridden's R2-type is standard release, and Shin Matsunaga's is P-Bandai. Both can be easily converted to R1-types by simply removing two parts from each lower leg.
    Edit after seeing the articulation: both also have double-jointed elbows and 90-degree knee bends.

  • @Pokey_Puni_
    @Pokey_Puni_ 3 ปีที่แล้ว +1

    This was my 2nd gunpla kit, i picked him up while at a anime convention, and custom painted him with black smudges (battle damage or scuffs) and gold detailing, and is still one of my favorite kits!

  • @aerozed95
    @aerozed95 4 ปีที่แล้ว +4

    I really do enjoy your reviews! Knowing some of the technical issues, I still chose to get this and the Gelgoog Jager counterpart because I thought it would make a nice pair of rivals to my White Dingo's GM Sniper II, seeing as Shin was involved with the colony drop that resulted in the catastrophic damage of Australia.

  • @elipsiclearts2284
    @elipsiclearts2284 3 ปีที่แล้ว +2

    It’s surprising to me how much was reused or very clearly inspired by this kit for the newer 2020 Zaku II

  • @helenbaker7179
    @helenbaker7179 4 ปีที่แล้ว +1

    wow! a white zaku looks surprisingly really nice!

  • @joshmcclure5562
    @joshmcclure5562 4 ปีที่แล้ว +9

    For the rounded sticker I used glue and heat from a hairdryer to adhere it to the plastic

    • @coleviloria3800
      @coleviloria3800 4 ปีที่แล้ว

      I’m sure there is a water slide decal sheet of what would come in this kit as stickers, do water slides have the same hard time staying on a piece that has weird angles and shapes?

  • @kashmerlangston545
    @kashmerlangston545 3 ปีที่แล้ว +2

    2:05 I love how he looks like he's saying "I got bodies,bitch. What's good?"

  • @stygiandragon3865
    @stygiandragon3865 4 ปีที่แล้ว

    2:00 Am I the only one who appreciated the funny posing pointing and the facepalm when he's talking about the sticker

  • @vali6717
    @vali6717 4 ปีที่แล้ว +1

    This was my first Zaku ever and I have to say I love it.
    It was the design that made me realize my idea of a custom Zaku High Mobility Type that is unfortunately for this particular kit is just borrowing pieces and based on the Origins Gaia/Mash kit instead.

  • @benchui580
    @benchui580 4 ปีที่แล้ว +12

    The sad thing is the HGMSV only have these zaku but no EFSF suit and dozulu 's zaku.

    • @leolied6766
      @leolied6766 4 ปีที่แล้ว +3

      Well they did continue the HgMSV line as HG origin MSD, which is mostly msv designs but in the orign style.

    • @paakdisayaniyom
      @paakdisayaniyom 4 ปีที่แล้ว +1

      @Ben Chui I wish Bandai would do more High Grade from MSV series such as Zaku Marine Type (since Bandai already made HGUC Zaku Mariner which the MS was base on Zaku Marine Type) Recon Zaku, Gouf Heavy Arms Type or even Full Armor Gundam that would be great.

    • @LeeONardo
      @LeeONardo 4 ปีที่แล้ว

      I highly recommend you get the GM sniper and guard customs, beautiful kits when they have the labels applied. BUT they are pbandai ...

    • @paakdisayaniyom
      @paakdisayaniyom 4 ปีที่แล้ว +3

      @@LeeONardo I wish that HG GTO GM​ Sniper Custom​ would be a regular release rather than be a P-Bandai.

    • @benchui580
      @benchui580 4 ปีที่แล้ว +3

      @@paakdisayaniyom that's the main problem with HGGTO MSD, half of the efsf kit is P-bandai. QQ

  • @SilverTheGreatX
    @SilverTheGreatX 4 ปีที่แล้ว +1

    This was my first gunpla and i gotta admit, it looks really cool even to this day

  • @OtherMomo
    @OtherMomo 4 ปีที่แล้ว +4

    THE YEET HAWK

  • @Feiora
    @Feiora 4 ปีที่แล้ว

    Finally a review on a suit I was considering on getting or not... I kinda way the HM parts for a custom Zaku II build but I'm not sure which High Mobility Zaku to get... technically I don't really care who the pilot is, the parts are what I want but its the painting and cost that trouble me as none of the suits shown cost equally, at least not from the places I shop from and have to rough up and repaint the surface is such a time consuming tedious task...

  • @skyan1556
    @skyan1556 4 ปีที่แล้ว

    was looking for a matsunga HG vs tri star HG video, good thing i go here first , thx a lot m8 B)

  • @kuraikusanagi7892
    @kuraikusanagi7892 4 ปีที่แล้ว +1

    Not related to this kit, but was wondering if you'd gotten the hgac geminass yet. Just finished it this morning myself, and... It's ok. Spent $70USD for it, but it honestly shouldn't have been p-bandai. Elbows only move about 90 degrees, knees a bit more than that. Some parts are just held by friction more or less, so I'll have to glue them. Mainly the grey parts on the knees, and the yellow parts on the shoulders. Looks great, and color separation is awesome, but it seriously should have been a normal release... Would have been better if it'd had the upgrade parts. Least then the price would have been justifiable.

  • @DeamonChocobo
    @DeamonChocobo 4 ปีที่แล้ว

    I recently built Shin Matsunaga's Gelgoog Jeger and I loved it.

  • @kennethwilliams543
    @kennethwilliams543 4 ปีที่แล้ว +1

    I saw your vid on why the Titans used Hizacks and agreed with your research and opinion. So I wanted to ask if you could cover a longtime question I'v had about the development of the New type OS in units like the Blue Destiny, Pale Riders, and Sentinel. My question is: Did the NT-D system come from the continued development of counter Newtype weapons and why didnt the federation or Zeon/Neo Zeon focus more on that since Newtypes would always devastate morale and attrition on both sides?

  • @vustvaleo8068
    @vustvaleo8068 4 ปีที่แล้ว +3

    ah yes Shin Matsunaga, the guy who met Johnny Ridden but confuses him for Char Aznable just because both pilots has the gimmick of red colors thus pissed Johnny off and then later is seen in Gundam Evolve joining the A.E.U.G. and pilots a custom Zeta Gundam.

  • @macfurry3214
    @macfurry3214 4 ปีที่แล้ว

    Stickers on Zaku always the worst problem (always fall off because of the curves), but the outlook always look handsome. Recommend replace the large stickers by paint, then cut out the wolf head and stick it on.
    By the way, if you want to put the weapon holder, put it on first before applying the stickers (or paint it so stickers won't get scratched off).

  • @PsychoStreak
    @PsychoStreak 4 ปีที่แล้ว

    I think this might be the best representation of just how bulky the Always Bulky Zaku III is.

  • @HeadCannonPrime
    @HeadCannonPrime 4 ปีที่แล้ว

    Dat sticker tho!!!!
    For anyone getting this kit, or any of the Ace Pilot series I STRONGLY suggest buying the water slide decal sheet that goes with these kits. It is well worth it.

    • @papamustaine9644
      @papamustaine9644 2 ปีที่แล้ว

      Im just going to paint the blue stripes and use the wolf head sticker on it. I have the kit right now but did not build it yet

  • @gunplagoon
    @gunplagoon 4 ปีที่แล้ว +1

    Damnnn that’s clean 🔥🔥

  • @MsGhost06
    @MsGhost06 4 ปีที่แล้ว +1

    they should use HG The Origin lines to make more of this MSV Zakus like Dozle Zabi, Shin Matsunaga, Johnny Ridden, etc etc

  • @peerapasch
    @peerapasch 4 ปีที่แล้ว +1

    i would like to see the review of johnny ridden version as well

  • @joshmcclure5562
    @joshmcclure5562 4 ปีที่แล้ว

    Also being that the zaku is all white as in a blank canvas you can just paint it however you wish, take advantage and go nuts

  • @alluringming
    @alluringming 4 ปีที่แล้ว

    I like the zaku ii high mobility type. Sure the gelgoogs where good but something ab out the zakui just like more. With gouf custom being next to them ^^

  • @OtherMomo
    @OtherMomo 4 ปีที่แล้ว

    man, i wish bandai would have made more origin MSV zeon suits. an Origin Matsunaga would have been WONDERFUL

  • @juandelata
    @juandelata 4 ปีที่แล้ว +1

    I kinda miss it when you'd say stickaz instead of stickers lol
    also, are you going to review any of the RG Zaku IIs in the future?

  • @cynicalmedic252
    @cynicalmedic252 4 ปีที่แล้ว +2

    I wish they made a Origin version of Shin Matsunaga's Zaku, they already made the Black Tri-Star Origin version. Really I just want more Origin Zakus.

    • @adityarachmadi7647
      @adityarachmadi7647 4 ปีที่แล้ว

      But he's not appeared in the origin

    • @MrRe-pg7fj
      @MrRe-pg7fj 4 ปีที่แล้ว +1

      aditya rachmadi MSD exists.

    • @cynicalmedic252
      @cynicalmedic252 4 ปีที่แล้ว

      @@adityarachmadi7647 Like Mr. Lee's comment said MSD (Mobile Suit Discovery) is part of Origin with mobile suits that was not in the OVA. So new mobile suits and variants can easily be added.
      www.gundam-the-origin.net/msd/index.html

  • @trougas
    @trougas 4 ปีที่แล้ว +1

    If you like this zaku's mold but feels that the weaponry and options are lacking, HGBF Zaku Amazing could be a viable option, it is essentially a black tristars zaku, plus extra shoulder, leg and backpack parts. It also comes with twin heat knives, twin revolvers, and long beam rifle. You could also build a char colored high mobility zaku ii with the parts inside, just lacking a single shoulder spike. But shin matsunaga has slightly different mold than this one so its not really a 1:1 substitute, plus the striking white color is very impressive. I'm waiting for bandai to make origin version of shin matsunaga's, with improved joints. I just hope its not p bandai

  • @lilruss15
    @lilruss15 4 ปีที่แล้ว +1

    Still waiting the HGGTO version of this, since it only require limited amount of modifying from Black tri-star version

  • @markjosephanthonygabrielma2824
    @markjosephanthonygabrielma2824 4 ปีที่แล้ว

    Kakarot, are you interested in the upcoming HG Char's Zaku II? What skirt option would you use? The plastic jointed ones or the rubber flexible skirts?

  • @Tinybudgetfilms
    @Tinybudgetfilms 2 ปีที่แล้ว

    I actually have never seen this kit in-store before

  • @WarwolfGames
    @WarwolfGames 4 ปีที่แล้ว

    Hey Kakarot, good to see you again :)

  • @garrettkim2429
    @garrettkim2429 4 ปีที่แล้ว

    What zakus come with the collapsing/tube style stock? Aren't there also some gelgoogs that come with that stock too?

  • @kevjad6536
    @kevjad6536 4 ปีที่แล้ว

    Hey kakarot, I remembered what you said in your video about the gm2 being either equivalent/better than the rx78-2. So when it was mentioned that the windam is the same/equivalent with the strike, are they pertaining to the general understood performance of the strike, or specificaly referring to kira's/even mu's performace with it?

  • @slapyouface6969
    @slapyouface6969 3 ปีที่แล้ว

    RG High mobility type zaku review ?

  • @sierra_0256
    @sierra_0256 3 ปีที่แล้ว

    Finally bought this badboi just today haha

  • @fishpop
    @fishpop 4 ปีที่แล้ว

    I've been meaning to get the Matsunaga/Ridden HiMo Zaku 2s after getting them in GBO2 but i've never gotten around to it.

  • @tenkowolf8325
    @tenkowolf8325 4 ปีที่แล้ว

    Is it cool that I don't make the guns for my model kits just the beam saber and shields?

  • @tacticianM
    @tacticianM 4 ปีที่แล้ว +1

    Who's the girl you use to point out the sticks and stuff

  • @redohealer2
    @redohealer2 4 ปีที่แล้ว

    Anything history video for the Efreets?

  • @phoenix612
    @phoenix612 4 ปีที่แล้ว

    Kak so their a game called heart of iron 4 or hoi4. There is a mod for the game that takes place during the 1 year war and I very curious if you could do a video on it and give your thoughts on the mod and the game. I know this isn’t really your kinda of video but still it wouldn’t hurt to try right?
    Ps: love your video and I think your the reason I why I am so into Gundam and love it

  • @highhunter1st
    @highhunter1st 4 ปีที่แล้ว

    Is there a way to prevent sticker damage other then applying after parts equipped ?

  • @nmarvlonam9908
    @nmarvlonam9908 4 ปีที่แล้ว

    I'm waiting mine too arrive

  • @hiroakiminoroz1700
    @hiroakiminoroz1700 4 ปีที่แล้ว

    I was about to buy the red zaku the origin, buy when i saw this zaku i changed my mind inmediatily

  • @thereturnofthebruce971
    @thereturnofthebruce971 7 วันที่ผ่านมา

    Huh i guess the online store was scamming me for not buying it

  • @true_neutral3378
    @true_neutral3378 4 ปีที่แล้ว +3

    I've got to say, you're panel lining is WAY too thick

    • @LoliMaster69227
      @LoliMaster69227 4 ปีที่แล้ว +2

      Oh thank God I'm not the only one who's noticed this. I'm swear I thought I'm blind cause nobody else ever says anything about it.

    • @true_neutral3378
      @true_neutral3378 4 ปีที่แล้ว +2

      LoliMaster 69 maybe everyone else does it the same way? *shudders*

    • @dantesparda492
      @dantesparda492 4 ปีที่แล้ว +1

      I think he used black instead of grey. Grey looks a bit better on white in my opinion

    • @LoliMaster69227
      @LoliMaster69227 4 ปีที่แล้ว +2

      @@dantesparda492 that's not what he meant. He means it too THICK not how much the black contrasts with the white. Why is there so much black? Are the panel lines really that big that you have to cover it all or is he just doing this on purpose?

    • @dantesparda492
      @dantesparda492 4 ปีที่แล้ว +1

      @@LoliMaster69227 ahh i get it now. I fully agree. Maybe he likes it that way?

  • @PaladinodoCerradooficial
    @PaladinodoCerradooficial 4 ปีที่แล้ว

    I want, but if Bandai realease in ORIGIN LINE is gonna blow mind.

  • @ecs1492
    @ecs1492 4 ปีที่แล้ว +2

    The intro sounded like kakarot didnt like the long name, but then what if he reviewed the hg phenex

  • @LoliMaster69227
    @LoliMaster69227 4 ปีที่แล้ว

    You really like reviewing old kits dont ya?

  • @animerewind1323
    @animerewind1323 4 ปีที่แล้ว +1

    Hey man I really love your content. I noticed how much your love Meyrin and I found on eBay a talking Meyrin I-doll that comes with 10 phrases. Thought you might be interested.

    • @kakarot197
      @kakarot197  4 ปีที่แล้ว +1

      I got 2 of those :3

    • @animerewind1323
      @animerewind1323 4 ปีที่แล้ว +1

      Kakarot197 oh okay. Nice!🤘

  • @seansylvialee7740
    @seansylvialee7740 3 ปีที่แล้ว

    i think i heard bazookey .......

  • @LamborghiniReventonN00-20
    @LamborghiniReventonN00-20 4 ปีที่แล้ว

    Y e e t H a w k

  • @ffauzan7408
    @ffauzan7408 4 ปีที่แล้ว

    Nice

  • @movingtarget2977
    @movingtarget2977 ปีที่แล้ว

    Another black tristars leg type c'mon

  • @xamel94
    @xamel94 4 ปีที่แล้ว

    I'm not skilled enough to build it I wish I was

  • @crist3809
    @crist3809 4 ปีที่แล้ว

    Can you chill with your panel lining? It's way too thick and too much
    Btw I'm glad bandai giving us the water decal add on for this kit

    • @yanjirujan193
      @yanjirujan193 4 ปีที่แล้ว +3

      I think he just using normal black Gundam marker, not the gray one

  • @gravefox4206
    @gravefox4206 4 ปีที่แล้ว

    FIRST COMMENT!!!! XDXDXDXD sup Feddie Cannon Fodder :P

  • @Kaitos11
    @Kaitos11 4 ปีที่แล้ว

    I have this kit and that fucking sticker is annoying as hell. Everything else is great, though!