Hey man keep it up you are definitely one of the guys who inspired me to mod it up. Getting mine ready for the big Durango meet oct 17 in NJ I hope everyone can make it, I wanna see all these mods in person
Man i greatly appreciate it. I love doing this and helping anyone who wants to do the same. I wish I could make a Durango meet like that but all the cool Durangos are upstate. Im deep south 😅
Did you have to get new catalytic converter’s,cat delete or can you still use your originals??? I have a 2021 Durango rt with mopar catback exhaust system & volant intake already! I’m looking to add the American racing long tube headers! Wanna make sure it’s installed correctly!
Much appreciate the support man. I’m not entirely sure though. This was years ago and prices just ain’t the same as they were. I would hate to give you a false number
I have a 2016 Durango RT AWD and trying to decide from short or long tube headers. Problem is I lowered my Durango and I’m worried about clearance. How far do the headers drop from underneath?
They actually don’t drop far at all. Even lowered you still have pretty good clearance. I’ve never bottomed out and I’ve damn near dukes of hazard it lol
Do you happen to remember how long the o2 extension harnesses were? I bought a used set of headers and they didn’t come with them so I need the right length to buy. Thank you in advance.
Hey Bro amazing video, I am installing the same headers on my 5.7 grand Cherokee, but have no idea about tuning it once the headers works is done. How i do that? Should I go to any web site? Do I need to buy any hardware? Sorry for my ignorance, but I really want to get the most power I can from my hemi. Street use, just in case, thanks !
Check online. To see what places you can tune it at, with a dyno. I believe you can get your pcm tuned as well if you ship it. Mostly do your research online.
I agree. Not an dumb question though but to get the most out of it, Dino tuning it will be the way to go. That requires an unlocked pcm if you have a 15 model or better. I don’t think it can be done without it. I’m the near future you might want to pair those headers with a good exhaust system as well to get proper flow and a little more power
I know this an old vid but my question for you is on the SHORT pipe issue. I have a 12 Durango R/T with a full 2.5in straight pipe no x-pipe. So did he have to cut some pipe to hook up everything? Reason I ask the shop that's doing the install doesn't do exhaust work.
I've done manifolds in my old 5.7 commander which seems pretty close to the Durango just dodge seems to put stuff opposite side of jeep in the bay . On the jeep I pulled the air box , coolant reservoir alternator other side battery box then fender skirts .. figure my Durango should suck just as much 😅
Whatup man! So I just got a 2020 RT awd. I am getting ready to order blastin bobs axle back with magnaflow glasspacks. Magnaflow X pipe and then headers... I don't know what long tube headers to get, what do you think will be best bang for the buck? My intake is on the way already as well
Congrats on your purchase man. Sounds like you have big plans. If you're looking for some great quality headers kooks would probably be the best route to go
It took about 12 hrs. It was hell honestly. I just got two codes pop up a couple days ago. Air fuel ratio is off and some code dealing with my cats but im data logging so I can get a tune and fix it
Agame TheOfficial I just bought a 2020 5.7 HEMI R/T. First thing I did when I left the dealership was drive to muffler shop and did a mid delete. Love it!
Dope!!! I’m right behind you with my Durango with the long tubes! Just got my jay Greene mds delete cam and a full set of hellcat lifters installed and tuned ima ride that till beginning of next year the ln throw them tubes on! Think I’m goin with kooks tho! Nice truck bra bra 💪🏾💯
I got the comp cam and it’s a stage 2 204/222 vvt. So just one up from stock. I added the mds delete cam and a full set of hellcat lifters and got new oem valve seal and springs put in and that was it! Pretty painless for the future gain! average gains 10-15 hp for now cuz I’m stock other wise, not much yet, but with the 6.4 intake and then adding my long tubes numbers should be higher they said. I’m goin to local dyno for that tho when it’s time!
@@agametheofficial37 I think they would look AMAZING on your truck! I found really good ones I want to put on my truck on www.zl1addons.com but right now my budget dictates otherwise! You mean I gotta pay bills EVERY month? 🤣🤣
@@agametheofficial37 I'm putting them on my Blacktop RT I seen them on LMP site they are bolt in no welding just cut and bolt in no running wires they are blue tooth. Like 700$
Told you that install was no joke bro...you got me wanting long tubes now...can’t wait to hear it in person
Man it was tough but I wanted the experience. For some reason I thought you already had em
I have hellcat manifolds and catless mids
@@cortnewilliams4576 oh yea i remember you telling me that. Hell you might as well go with the long tubes lol. They will compliment that cam well
Hey man keep it up you are definitely one of the guys who inspired me to mod it up. Getting mine ready for the big Durango meet oct 17 in NJ I hope everyone can make it, I wanna see all these mods in person
Man i greatly appreciate it. I love doing this and helping anyone who wants to do the same. I wish I could make a Durango meet like that but all the cool Durangos are upstate. Im deep south 😅
Yea i feel you, its not a lot of Durango in Baltimore either but, ima make the trip
@@venom_rtvenom_rt188 good deal. Thanks for the support 💪🏾🤙🏾
Cant wait to get mine tomorrow & start adding stuff! My stripe, my air intake , x mod etc! Nice durango my guy!
Much appreciated bruh
Damn that sounds good!!
Great job bro I may put some on soon!
Much appreciated!! Its a great mod to have
Did you have to get new catalytic converter’s,cat delete or can you still use your originals??? I have a 2021 Durango rt with mopar catback exhaust system & volant intake already! I’m looking to add the American racing long tube headers! Wanna make sure it’s installed correctly!
Been waiting on this 💪🏾💪🏾💪🏾 sounds good man
Appreciate it bruh‼️
Getting my long tubes and high flow cats put on now and well be done tomorrow. Pretty stoked about it all.
I think you’ll like em. It’ll definitely be an improvement to sound and performance
Bruh you literally got the best durango content i've found! and you from the Sipp 🦾
Lol man thank you for that. I greatly appreciate it. Im trying out here
Brother your rango been an inspiration for my build. How much would your uncle charge to install long tube
Much appreciate the support man. I’m not entirely sure though. This was years ago and prices just ain’t the same as they were. I would hate to give you a false number
I have a 2016 Durango RT AWD and trying to decide from short or long tube headers. Problem is I lowered my Durango and I’m worried about clearance. How far do the headers drop from underneath?
They actually don’t drop far at all. Even lowered you still have pretty good clearance. I’ve never bottomed out and I’ve damn near dukes of hazard it lol
Do you happen to remember how long the o2 extension harnesses were? I bought a used set of headers and they didn’t come with them so I need the right length to buy. Thank you in advance.
Sorry man I don’t remember
Hey Bro amazing video, I am installing the same headers on my 5.7 grand Cherokee, but have no idea about tuning it once the headers works is done. How i do that? Should I go to any web site? Do I need to buy any hardware? Sorry for my ignorance, but I really want to get the most power I can from my hemi. Street use, just in case, thanks !
Check online. To see what places you can tune it at, with a dyno. I believe you can get your pcm tuned as well if you ship it. Mostly do your research online.
I agree. Not an dumb question though but to get the most out of it, Dino tuning it will be the way to go. That requires an unlocked pcm if you have a 15 model or better. I don’t think it can be done without it. I’m the near future you might want to pair those headers with a good exhaust system as well to get proper flow and a little more power
I know this an old vid but my question for you is on the SHORT pipe issue. I have a 12 Durango R/T with a full 2.5in straight pipe no x-pipe. So did he have to cut some pipe to hook up everything? Reason I ask the shop that's doing the install doesn't do exhaust work.
No we didn't have to cut anything. The headers are a direct bolt on so you should be good
@@agametheofficial37 Saydat bruh thx
I've done manifolds in my old 5.7 commander which seems pretty close to the Durango just dodge seems to put stuff opposite side of jeep in the bay . On the jeep I pulled the air box , coolant reservoir alternator other side battery box then fender skirts .. figure my Durango should suck just as much 😅
Do you have an exhaust already? Or just the AR Headers? If so what exhaust do you have?
Just the headers. Kinda pieced together the exhaust with an xpipe and gibson mufflers
That smile at 9:16.....
What headers did you use?
Sounds great 👍
Whatup man! So I just got a 2020 RT awd. I am getting ready to order blastin bobs axle back with magnaflow glasspacks. Magnaflow X pipe and then headers... I don't know what long tube headers to get, what do you think will be best bang for the buck? My intake is on the way already as well
Congrats on your purchase man. Sounds like you have big plans. If you're looking for some great quality headers kooks would probably be the best route to go
Can I get the link for the header boss
Sounds awesome. What headers ?
American racing headers 1 3/4
Bout to do the same to mine. I usually do all my own work, but I think this’ll be one for an actual shop lol. Sounds great man!
Lol its definitely not easy. If you do it yourself you might wanna get professional help
@@agametheofficial37 which size did you get?
I went with 1 3/4.
I'm going do the same Shop I have a 07 aspen 5.7 hemi
Power difference?
Sounds good
What’s the feedback from installing these on your Durango
I’m pretty satisfied with them. Definitely need to pair them with a nice exhaust though.
@@agametheofficial37 what’s the full cost of them installed and buying
@@Durangort-mn3jd the headers were about $1200. I installed them myself but if I were to have a shop do it, it would’ve been about $700
@@agametheofficial37 dose they need a tuneup
Thank you very much for info
@@Durangort-mn3jd yes you will want to get a tune but it’s not necessary. And no problem at all
Is there a website I can go to found one I have a 2018 durango rt awd and I’m looking for ine
Dope video bro
Thank you
Hey I have a 17 r/t with a borla s type exhaust, anything i should be aware of when purchasing these headers?
Just make sure the connections are the same size. Ik the borla probably has 2.5’ connections. Just make sure the headers match that
Does anyone know if I can throw dodge 5.7 Durango headers on a charger 5.7?
Don’t think so man. The figment wouldn’t be right. Best way to find out is look up some and see if they’re compatible
Sounds great, how long did it take to install? Any check engine lights on?
It took about 12 hrs. It was hell honestly. I just got two codes pop up a couple days ago. Air fuel ratio is off and some code dealing with my cats but im data logging so I can get a tune and fix it
@@agametheofficial37 wow 😮12 hours damn definitely not doing it myself lol. What did you have to remove and put back on in engine bay?
@@raymondrodriguez9850 the only thing I removed was my intake and dip stick. Probably should've removed a few more things to make it easier.
Sounds great bro!!! I personally want catless. I did a mid delete too, and will leave my resonators in.
Thats you I greatly appreciate that!! What year model do you have
Agame TheOfficial I just bought a 2020 5.7 HEMI R/T. First thing I did when I left the dealership was drive to muffler shop and did a mid delete. Love it!
@@djdannybhtx Lol good deal man congrats on getting the truck
Agame TheOfficial thank u! Love ur videos!
@@djdannybhtx big thanks man. Im trying lol
I have a 2017 Durango rt and I cant find headers for it is there any where special I have to look for them at
Where have you looked already?
Dope!!! I’m right behind you with my Durango with the long tubes! Just got my jay Greene mds delete cam and a full set of hellcat lifters installed and tuned ima ride that till beginning of next year the ln throw them tubes on! Think I’m goin with kooks tho! Nice truck bra bra 💪🏾💯
That's what's up. How much would you say the cam added?
I got the comp cam and it’s a stage 2 204/222 vvt. So just one up from stock. I added the mds delete cam and a full set of hellcat lifters and got new oem valve seal and springs put in and that was it! Pretty painless for the future gain! average gains 10-15 hp for now cuz I’m stock other wise, not much yet, but with the 6.4 intake and then adding my long tubes numbers should be higher they said. I’m goin to local dyno for that tho when it’s time!
Just added a small sound vid if you wanted to hear 💪🏾
@@MrNOLA31 watched the sound video. It sounds pretty mean lol. Can't wait to see you add to it.
lol thank you sir! Keep doing you man hold us down 🤣 I’m watching you lol! We close and practically family I’m in New Orleans! Much success bra bra!!
possible the cats were getting hot and the trans cooler lines were soaking it up. now the cats are gone probblem is
Oh HELL yeah! Joint sounds AMAZING!!! Looking at you truck in the air...how do you feel about a front splitter?
Man i would love a front splitter and a rear diffuser
@@agametheofficial37 I think they would look AMAZING on your truck! I found really good ones I want to put on my truck on www.zl1addons.com but right now my budget dictates otherwise! You mean I gotta pay bills EVERY month? 🤣🤣
@@B0RRAC0 🤣🤣 Same here bro!
I'm putting the same headers on mine. How you like it?
I love em man 💪🏾💯
@@agametheofficial37 so far I've done the AFE CAI, Corsa Sport Exhaust, and the Diablo PCM swap and tuner. Headers are next
@@fshcop do you know what you making from that?
@@agametheofficial37 No. I'll be hopping on the dyno after I put headers on. I'm guessing In the area 440 by the time I'm done
@@agametheofficial37 Who did you get your headers through?
Can't wait for the dyno now you need a stall speed from circle d ask jay greene which one would be best for your setup i have the 2800 - 3000 stall
I dont even know what that is lol. Is that a cam?
@@agametheofficial37 torque converter
@@agametheofficial37 from Circle D from facebook.com/gaugeperformance
What's the price of the headers and cats
Mine was about $1900 with cats
@@agametheofficial37 thanks
Yes sir!!!
Bro.. just ordered my AR Headers today. How are you liking yours
Im loving mines. They sound amazing
@@agametheofficial37 Have you noticed any increase in cabin noise or anything?
@@fshcop I don't get anything but exhaust in my cabin 😅. I like the noise
@@agametheofficial37 what size did you put on? I got larger ones to accommodate a future supercharger
@@fshcop I went with 1 3/4
Nice job man! Which ones did you go with?
Thanks man!! I went with American Racing 1 3/4
Ddsrt finally arrived
I have a shorty set that I'd like to do, did you go after all the manifold bolts from the bottom?
Not I did a combination of top and bottom. A lift or jack stands will really come in handy for this job
That thang breathing
Nice
Exhaust cut outs should be next.!!!!
Those would be awesome. I thought about them a while back before I got my gibsons
@@agametheofficial37 I'm putting them on my Blacktop RT I seen them on LMP site they are bolt in no welding just cut and bolt in no running wires they are blue tooth. Like 700$
@@tmangan327 I bet they'll sound great
@@agametheofficial37 Have you gotten a tune done on your yet at a speed shop and dynoed
@@tmangan327 i have before but haven't been to the dyno yet with the headers. Gotta data log today
Yea get it done! Film the whole thing if you mess up then we can see what you did wrong
I tried to edit it so you could see the highlights of every step. Only thing wrong was the alignment because of my mid muffler delete
Basically sound like a charger with longtubes