How To Remove The Exhaust From A 350Z OEM Exhaust Removal
ฝัง
- เผยแพร่เมื่อ 14 ก.ย. 2018
- What's up guys, just a removal video of the OEM exhaust system, let me know if you guys would like to see more removal vids like this. I should have the Akebono's back from powder-coating soon, and should have them installed soon as well, and the radiator should be installed soon too. If you have any questions just drop a comment, I'd be happy to help if I can. If you're new to the channel, consider subscribing, and make sure to hit that like button. I'll probably be finishing up the Akebono big brake kit soon.
eBay stores for used 350Z, G37, G35, and 300zx parts.
stores.ebay.com/bestdealautopa...
stores.ebay.com/ftpautoparts916/
Like+Sub for more great content.
Instagram - @justdriftcharlie (brand new Instagram)
Facebook - / jusdrift.charlie
I am NOT ASE certified, everything I do, I'm doing and learning at the same time. Instead of hiring people to do work for me I simply attempt to do it myself and most of the time it works out. I AM NOT RESPONSIBLE FOR ANY DAMAGE, OR PERSONAL INJURY THAT MAY OCCUR FROM WORKING ON YOUR OWN VEHICLES, THIS VIDEO IS SOLELY FOR ENTERTAINMENT PURPOSES.
Music: Show Love, and Luvly by Joakim Karud
joakimkarud.bandcamp.com
/ joakimkarud - ยานยนต์และพาหนะ
Man’s a god amongst kids doing their shit in the street.
Great video!!! I need to take my exhaust off to sort some rust issues and i just assumed that I would be fighting with the rubber mounts, bolts are much easier! Thanks
Yo this is the only actual helpful Z channel that I’ve seen lol
great video man! super helpful
Good tip on removing the bolts to the hangers instead of the hooks from the hangers. Made my life a lot easier.
Haha, it is a lot easier lol
Terrific data. Thanks
Thanks for the video!
Very helpful, thank you
More videos like this. Thanks for sharing
Thanks for the support, much appreciated!
YESSSSSSSSSSSSSSSSS PLSSSSSS I have a 350z anniversary 2005 and I've had to learn how to do things myself due to mechanic stealing my money not doing the correct jobs or shady fixes THANK YOU SO MUCH FOR YOUR VIDEO!! not know how to keep track of how you put things back after taking it back how does one that knows nothing write things in order to be able to put them back on correctly is what I'm really asking here 😢❤😢
Yes
I'll like for the video, thanks
Good vid
Thanks bro!
How did you know if the cats were bad?
Excessive amount of movement of the honeycomb inside, basically if the insides of the cats move, exhaust gasses can pass the honeycomb and cause p0420 or p0430 codes.
I have a question since you installed a motordyne exhaust on the 350 where did you put the ground since the exhaust is clamp on
You really don't need it. I've seen it cut, or not even there so.. many.. times lol
Very lucky man that those bolts aren’t rusted like mine lmao cough cough dremal
Yes, more videos like this! A good video on the cats would be appreciated.
Okay, I'll do that one today then, should be relatively quick since the exhaust is already dropped
Good vid but a few weeks too late for me coz i replaced oem with invidia gemini and got local guys to do the work...seeing this would've made me more confident n saved me some cash lol
Ahhh, that sucks man. But hey, at least you know for the future tho.
You should show how to remove the fuel pump and the float that shows how much fuel is in the car. My car needs a new fuel pump assembly and my gas gauge never reads right
I can do this, should be able to within the next week
I’ll like to see how to replace the VVT Solenoids
Cool, thanks for the recommendation. I've got the VVT's on my list, and I'll definitely do a vid on them.
I fucked up and removed the y pipe from the cat leaving it bolted with the mid pipe and I don’t wanna drop the support bracket just to get them off
You shouldn't have to, it should just be two 14mm nuts. So a regular 14mm wrench should work fine, or you can use a long extension
Is it bad to run the car without that “W” brace under the midpipe? Just so it’s easier to remove/install the exhaust
Nah, your good. Your probably not even gonna notice a difference when installed/not. I've had so many z's come in without it that I was happy when this one came in with a nice one, so I can replace my rusty ass one lol
awesome vid, put the rear left tire is looking bald. stay safe
Nah he balds them down for style
How to install Z1 slave cylinder relocation kit
Honestly, a buddy just bought an HR and might want to do this. So, it might happen soon lol
A pillar gauge cluster.
Can't figure out how to get it apart. Both sides of the interior plastic please !
I don't quite understand what parts your talking about. You want the A-Pillar trims? But yours have gauges? And what side plastics?
Full Throttle the inside plastic a-pilar. Both sides. I want to figure out how to take them off to install speaker tweeters
Okay, no problem
What size socket are you using at 4:10 in the video?
14mm
Hey man do you know where I can get the 14MM from the mid pipe to the Y pipe? I want to know the exact specs because I can’t seem to find the right pattern
I don't know the exact thread pitch, but here the dealer part number. It's only like a $1 at the dealer
08918-3401A