Lots of people seem to be running a gravity-fed system, so it was nice to see a quick video with a pump setup. The camera flip had me laughing too. Cheers.
Great vid brother, you know the best part is the camera flip right!?!?! Lmao Kinding aside, I'm also building an open trailer and are struggling with what route to go. I'm also thinking of using a pump with a smalk pressurized tank attached$$ This will keep pump primed 24/7 How has your system been work since you installed it, any issues with the power washer not getting enough water because of the return line?? Thanks again for sharing your time and insight, wishing you all the best from Canada 🇨🇦 🤙😎
I got so annoyed with this setup. The suction hose kept collapsing. Then it became annoying that the splitter kept working itself loose and I would lose spraying at the pressure washer. I ordered a switched quad pump from Amazon which stops pumping on its own when there is no demand for water. It had a 3-year warranty and also puts out 5.5gpm, which is adjustable at 70 psi and shoots water pretty hard on its own. I stopped using the pressure washer and just used the pump on quick washes.Also fills a bucket fast. So I got a stand up 85 gallon barrel which was given to me by a company that uses engine degreasers and they throw them out.Saved a ton of money and it has a much smaller foot print so I can fit everything on the back of my pickup not needing to carry a trailer.
I know doesn't make sense to have both open, you would u lose pressure with two hoses....right?!? I think once the power wash is on there will NOT be a lot of water returning to the tank it should all or mostly go to pwr washer!?! I'm also lookin into a PUMP WITH A SMALL PRESSURE TANK attached, the pressure tank will always keep the pump primed even when your not using the gun. But of course it's more $$$$$$ but I think worth it if your busy using the pwr washer all day long......... there Pro's and Con's to any set up! Good luck, hope your doing well and keep busy!! GOOD TIMES!! 🤙 😎
Doesn't the presure washer pull, or suction the water from the water tank? Do You need to feed the presure washer with a separed pump? I'm confused. Anybody please. Thanks..
Lots of people seem to be running a gravity-fed system, so it was nice to see a quick video with a pump setup. The camera flip had me laughing too. Cheers.
Thanks for giving good advice ! Helped me out for sure
Camera flip was funny. Nice setup 🤗
Great vid brother, you know the best part is the camera flip right!?!?! Lmao Kinding aside, I'm also building an open trailer and are struggling with what route to go. I'm also thinking of using a pump with a smalk pressurized tank attached$$ This will keep pump primed 24/7 How has your system been work since you installed it, any issues with the power washer not getting enough water because of the return line?? Thanks again for sharing your time and insight, wishing you all the best from Canada 🇨🇦 🤙😎
I got so annoyed with this setup. The suction hose kept collapsing. Then it became annoying that the splitter kept working itself loose and I would lose spraying at the pressure washer. I ordered a switched quad pump from Amazon which stops pumping on its own when there is no demand for water. It had a 3-year warranty and also puts out 5.5gpm, which is adjustable at 70 psi and shoots water pretty hard on its own. I stopped using the pressure washer and just used the pump on quick washes.Also fills a bucket fast. So I got a stand up 85 gallon barrel which was given to me by a company that uses engine degreasers and they throw them out.Saved a ton of money and it has a much smaller foot print so I can fit everything on the back of my pickup not needing to carry a trailer.
What is the proper name for that water pump?
How did this pump work out? And how long did it last ya before changing it out for the next? Hear they don’t last long
Can u drop links of eqqipment u got ? Pump and stuff needed to put together ?
should both valves at the exit of the water pump be open during operation?
Yes
I know doesn't make sense to have both open, you would u lose pressure with two hoses....right?!? I think once the power wash is on there will NOT be a lot of water returning to the tank it should all or mostly go to pwr washer!?! I'm also lookin into a PUMP WITH A SMALL PRESSURE TANK attached, the pressure tank will always keep the pump primed even when your not using the gun. But of course it's more $$$$$$ but I think worth it if your busy using the pwr washer all day long......... there Pro's and Con's to any set up! Good luck, hope your doing well and keep busy!! GOOD TIMES!! 🤙 😎
What do you call the connections for the return hose? I can find it at Home Depot. Thanks!
Hey, It is called a hose barb!
What type of glue did you use?
What fitting is that at 4:41??
if you fill that tank all the way up, I don't think those straps will hold that weight.
Doesn't the presure washer pull, or suction the water from the water tank? Do You need to feed the presure washer with a separed pump? I'm confused. Anybody please. Thanks..
The gf holding the camera 😂
Do yourself a favor and get a 12volt pump from Amazon it will change your life
I am eventually going to get a belt fed pressure washer so shouldn't have to worry about it much longer
Hello There guys I'm planning the same setup but may I know where did you get the tank and what is the size of it. Thank you in advance
Hello , can I call you ?