Lightweight is good and what did I use it for it’s a lawnmower th-cam.com/users/postUgkxTPN04aT-Qdjr_KS3ql7ng8wnU3wwsCqk also recommend Yes it is lightweight so hence not as robust as our old one. But if you take care it does the job really well.
Awesome fleet! I do miss your earlier videos that seemed a bit more 'primitive' and had more 'how-to's', but you're on to bigger and better things! And I understand that. Keep up the good work, you've got anyone else's tractor on here blown out of the water...and you can multiply that by 3 with all your rigs!
haha! thanks man, I'm gonna try and do more how-to's and things of that nature this winter. I wanted to spend the summer riding, instead of building like I did last summer.
Cool that gives me hope to build one because right now im not sure that I can liftit but I know I can do most of that other stuff you did in your previous video. Where I live in Florida deckless lawn mowers are a dime a dozen. I think this is definatly going to be a project afterfootball season ends. Love your vids man keep them coming!
We put a recliner on a tractor frame with and 18 horse v twin and smaller pulley on the transmission and bigger pulley on the motor. It was pretty sweet but id like to see how badass of one you can build!
I was thinking well u have the axle shafts coming off the transmission u slide small a spockets on each side before the wheel goes on than u can run chain to a second axle making a four wheel double axle set up making it faster to push through mud
Excellent video tour. New here. You created some nice creations. Your off road video's spare no mercy on the equipment. It's fun to create custom rides & then test them to the limits! ( That happens here too.) Nice job at producing video's too, good lighting, not all shaky & they flow - yada yada! Had to give you a little of my time - It's evident you invest a ton of your time in this.
The show tractor is SICK. I got my hands on a craftsman 2 that had a briggs 12.5 flathead I used to swap onto a pull behind that had a blown up motor and I'm gonna use the craftsman frame to build a 420cc predator stage 2 on it with a torque converter and racing go kart wheels and rims and slam it to 2 inches off the ground for lawnmower racing. Its gonna be sick
I've been with you throw it all an I am now in the process of building my own mud mower you have taught me a hell of a lot of stuff an I would love to see some new stuff man an I could use some help with my mud mower as well hit me back with some news buddy
hey, I have an idea for the crafts man crawler, you could use the vary-drive pulley off of pal's old tractor and rig it manually to change giving you a high and low speed. Hu? maybe? that thing in my opinion, is better than the lifted mudding mower. P.S. my whole channel is thanks to you. you inspired me about 1.5 to 2 years ago to do what your doing. thanks man.
The tractors are sick man u should make one with a high custom lift I was thinking getting an old shit 4×4 quad n putting the suspension and four wheel drive setup on it
to make a riding mower fast do you switch the back pulley to a small one or would you switch the frount one? and what would you sugest if i want it to go really fast?
Can you put on larger tires on smaller rims? For example I have a rim with 16-7.50-8 tires on it. How much larger tires can I get that will still fit the rims?
I've got a question for you, my starter solenoid has gone out on my old Murray 11/36 off road tractor and I was wondering if there is any way to bypass the solenoid and still be able to use the key switch to start it and cut it off. I know about the way to bypass it with jumper cables but the. You can't use the key and you have to carry cables. Just wondering if you had any ideas.
Thanks, one more thing, how did you beef up your steering to be able to take a beating? Mine has got all bent out shape? Any ideas to beef it up. It's. Murray 11/36 from the 80s and its like a 2 piece thing for the piece in the front and yet are splitting apart from offloading.
To Jack slaton) I have gotten my first mower a week ago all I need to say is it doesn't relly matter what kind but stay away from hydrostatic trams axels they are difficult to work with
How did u fab the pulley on too the mower I want to do something like that bec i don't have money for battery and I don't like to carry a jump box around every where
Have you ever thought of or done a 1962 Cub Cadet/International garden tractor, i have one, completely stock, and it's great, im gonna put on better pulleys and wheels though, i want it a little faster, and stronger, but otherwise, its really fun, i just like the look of a raised tractor with four-wheeler tires and wheels.
love all three of these had a newer version of the huffy actually mowed with it though till the weird blade drive setup went out then turned it into a go cart but nowhere near as nice as yours
Hey fearless I have a 70s sears with a 10 hp that runs great I was wondering if i could switch the back pully to the front?? My back pully is huge about the size of a dinner plate any suggestions?? Thanks
Your next project should be a 4wd rock climbing lawnmower. Not for mud, just for climbing steep inclines and for climbing rocks. But you would need a powerful engine.
Lightweight is good and what did I use it for it’s a lawnmower th-cam.com/users/postUgkxTPN04aT-Qdjr_KS3ql7ng8wnU3wwsCqk also recommend Yes it is lightweight so hence not as robust as our old one. But if you take care it does the job really well.
thanks for sticking around man!
you should do an updated one of these vids. I'd definitely watch it.
I've been here through all 3 builds, can't wait to see what is next! :D
that bumper is sick never thought of using bmx handle bars great way to make it work and look great idea
it has a 9t on the output of the tav2, and a 36t on the axle
Good to see all the tractors again!
Can't wait to see what's NEXT!!
Awesome fleet! I do miss your earlier videos that seemed a bit more 'primitive' and had more 'how-to's', but you're on to bigger and better things! And I understand that. Keep up the good work, you've got anyone else's tractor on here blown out of the water...and you can multiply that by 3 with all your rigs!
You should put a small turbo on the sears I love that tractor
waimeagavin808 I don’t think that would be good for muddy conditions...
I haven't yet, I still use it the way it was. I do want to re-deck it though.
haha! thanks man, I'm gonna try and do more how-to's and things of that nature this winter. I wanted to spend the summer riding, instead of building like I did last summer.
Thanks man, they are all lots of fun!
Cool that gives me hope to build one because right now im not sure that I can liftit but I know I can do most of that other stuff you did in your previous video.
Where I live in Florida deckless lawn mowers are a dime a dozen. I think this is definatly going to be a project afterfootball season ends.
Love your vids man keep them coming!
I can't like this video enough fearless! Great tractors! Great video!
it can be used, you just can't pulley swap it to make it faster
Rear engine drag racer! Lol nice builds! You are one helluva good fabricator
no, these are just my 3 main "finished" projects.
and, yes.... I agree!
Great work on the builds . Very impressive.
I still have it. never finished it
Fearless, gotta do a hot rod style tractor. Shift on the go peerless with an opposing twin Briggs. Would look wicked lol
thanks for the custom pull start vid you made a while back i tried the same thing and it work very good.
I didnt mod the murray steering at all, just the steering on the sears
I think it's dupli-color "metal specks" burnt copper metallic.
We put a recliner on a tractor frame with and 18 horse v twin and smaller pulley on the transmission and bigger pulley on the motor. It was pretty sweet but id like to see how badass of one you can build!
I’d like to see an updated video of this after the Murray is rebuilt
I was thinking well u have the axle shafts coming off the transmission u slide small a spockets on each side before the wheel goes on than u can run chain to a second axle making a four wheel double axle set up making it faster to push through mud
I didn't get an invite to that event this year.
the sears is absolutley badass
these are some sweet tractors
nice work fearless
That Parklane is badass, man.
Can you do a video on how you modded the engine components for the murray? That would be really helpful
-thanks
Excellent video tour. New here. You created some nice creations. Your off road video's spare no mercy on the equipment. It's fun to create custom rides & then test them to the limits! ( That happens here too.) Nice job at producing video's too, good lighting, not all shaky & they flow - yada yada! Had to give you a little of my time - It's evident you invest a ton of your time in this.
Excellent overview!
The show tractor is SICK. I got my hands on a craftsman 2 that had a briggs 12.5 flathead I used to swap onto a pull behind that had a blown up motor and I'm gonna use the craftsman frame to build a 420cc predator stage 2 on it with a torque converter and racing go kart wheels and rims and slam it to 2 inches off the ground for lawnmower racing. Its gonna be sick
I might do that once it's had time to break in
yea, can't wait to ride it again now that it's been tweaked a bit
nice builds, you should be proud of those!
Robert S gufgnfflggh! &7&?#vkgj&)*h) #)&:j) j#b'!;
I've been with you throw it all an I am now in the process of building my own mud mower you have taught me a hell of a lot of stuff an I would love to see some new stuff man an I could use some help with my mud mower as well hit me back with some news buddy
Very cool!! Loved it! Keep up the good work!
no, you need to solenoid because there is way too much amperage going through that circuit for a key switch.
hey, I have an idea for the crafts man crawler, you could use the vary-drive pulley off of pal's old tractor and rig it manually to change giving you a high and low speed. Hu? maybe? that thing in my opinion, is better than the lifted mudding mower.
P.S. my whole channel is thanks to you. you inspired me about 1.5 to 2 years ago to do what your doing. thanks man.
The craftsman crawler in sitting in the garage, and the lifted is at the mud king's house.
great video fearless! cant wait till project #4!
Great job. Very nice.
They look awesome
Thanks T-man!
This is why I like building offroad lawnmowers. You cant buy a decent atv for 1000 bucks... but you sure can build a badass offroader.
as large as you want as long as you buy them for 8" rims
you're very welcome
The tractors are sick man u should make one with a high custom lift I was thinking getting an old shit 4×4 quad n putting the suspension and four wheel drive setup on it
to make a riding mower fast do you switch the back pulley to a small one or would you switch the frount one? and what would you sugest if i want it to go really fast?
you have to go to your town office and use your serial # as your vin#
hows the craftsman crawler ?
Can you put on larger tires on smaller rims? For example I have a rim with 16-7.50-8 tires on it. How much larger tires can I get that will still fit the rims?
I have a mower with a hydrostatic transaxle and was wondering if that type of transmission can be used for an off-road mower
could you do a tutorial on how to do that gas pedal for the sears
Tyler Lowery. he did a video i think
Can you do a video on how to clean a carburetor?
I've got a question for you, my starter solenoid has gone out on my old Murray 11/36 off road tractor and I was wondering if there is any way to bypass the solenoid and still be able to use the key switch to start it and cut it off. I know about the way to bypass it with jumper cables but the. You can't use the key and you have to carry cables. Just wondering if you had any ideas.
Thanks, one more thing, how did you beef up your steering to be able to take a beating? Mine has got all bent out shape? Any ideas to beef it up. It's. Murray 11/36 from the 80s and its like a 2 piece thing for the piece in the front and yet are splitting apart from offloading.
To Jack slaton) I have gotten my first mower a week ago all I need to say is it doesn't relly matter what kind but stay away from hydrostatic trams axels they are difficult to work with
How do u actually build a go kart using an old lawn mower ans some wheels and things and what specific things would you need?
just an idea an off road trailer would be cool for some weekend trips off road
How did u fab the pulley on too the mower I want to do something like that bec i don't have money for battery and I don't like to carry a jump box around every where
what about the one with the huge stack(the one from first start in 2 years)
omg that sears is just badass!!
I could, I still have all the pieces for it. Just needs better tires all around, and thats a lot of $
Have you ever thought of or done a 1962 Cub Cadet/International garden tractor, i have one, completely stock, and it's great, im gonna put on better pulleys and wheels though, i want it a little faster, and stronger, but otherwise, its really fun, i just like the look of a raised tractor with four-wheeler tires and wheels.
were can I find 77 murry and how much did the desoil engine cost
love all three of these had a newer version of the huffy actually mowed with it though till the weird blade drive setup went out then turned it into a go cart but nowhere near as nice as yours
Nice fleet but what about the Craftsman crawler? Toro?
i have a 2011 lt2000 how do i make it faster it has a 21hp b&s hydrostatic trans my 86 wheel horse with a 12hp kohler runs circles around it?
Hey fearless u should do an overview of the lifted mower an craftsman crawler
Check out the Raven MPV mower. It's basically a ATV with a mower deck.
Im looking at an old 3 wheeler its just missing the head of the motor how much do you think it would cost to fix it tlc included
will you be heading over to pug1 for the racing lawnmower race around the 710 track.
A nice collection of machines dude :-)
Currently in the corner of my shop in pieces.
I love them. Keep up the good work
can u make a video of how u make the gas pedle
Haha! me too! I wish I had more space to ride the go kart though.
Dude! Love your work!
Great vid :) what would your surjest doing to a Westwood tractor to make it faster and more of road
Hey fearless I have a 70s sears with a 10 hp that runs great I was wondering if i could switch the back pully to the front?? My back pully is huge about the size of a dinner plate any suggestions?? Thanks
Love your go kart tractor. I wish I have something like that
The first one, the Murray, is it lifted at all?
WHAT GOT U BUILDING THESE COOL R LOW RIDES HERE..... N WHAT CITY N STATE R U IN N WHERE U ALL SHOW THEM .....??
all in all, what's your favorite tractor?
Your next project should be a 4wd rock climbing lawnmower. Not for mud, just for climbing steep inclines and for climbing rocks. But you would need a powerful engine.
it's a hood from a '66 huffy parklane
I haven't even started to mess with that one yet
where did you get the orange hood for the racing one?
Great overview video man!
I wanted the clutch and brake separate.
The murray, for sure!
Your tractors are awesome man! sub'd for sure! would LOOOOVE to see you put a CR500 engine into your cart tractor!
I would love to mess around with a shaft drive! no slippage!
Where can you buy a torque converter or centrifical clutch ?
sweet toys i couldnt just pick one id want all of them
what is the drive train setup on the newest one?