Everyone is different and enjoy doing different things. Every kid should get a childhood that they want, be it video games, or stuff like in the video.
@@eliforbes4842 Lmao, sure. You base that on what you think is fun. Times are different, technology has improved immensely compared to what you had during your childhood. What you think is better isn't a fact, it's just an opinion that is less valuable than today's children's.
Cheap riding mowers don`t last long because of the thin mower decks, but the motors last a long time, so converting them to fun riding machines is a great idea!
I think they make the deck cheap on purpose to sell more mowers. I would like a thick stainless steel deck, but good luck on that. Thanks for watching and yes they are great fun.
@@chud327 I just now replaced a 2003 Kabota diesel lawn tractor with 1800 hours on it, and I only did it because I wanted a zero turn, but that thing is built like a tank all over including the mower deck. Of course I did pay $6300 for it 20 years ago.
Purchased this to replace a guide pulley th-cam.com/users/postUgkxO9seYZjlnuP5UvMkb7osQW3WxPVeSnPk on our John Deere x304 snowblower. As I stated in the title, it is just about perfect. The stock pulley has a spacer at the bottom. I used four washers to emulate said spacer, and it works perfectly now. Great product, and great price especially if compared to typical JD prices.
Definitely do this to your dads mower without permission. Me as my brothers did it to my dad when we were kids. Put the deck back on with the pins but didn’t connect anything. Dad went to move it out from the shed and put the back wheel through the sheet metal wall
great video sir, I bought a large pully and Installed it but i had to move the motor back 1inch on my old Cad Cadet Hydro 1320 runs well for an old beast. I would love to get a set of the rear wheels you have. I'm in Australia and parts are just so expansive for old lawn tractors. soon i will try sprocket and chain and gear it down a bit via a Jackshaft or just Install a CB250 engine as i only use the Cad Cadet to check the mail-box 1.5 km drive-way it a long walk from the house.
Awesome man! Me and my boy are building a Murray and I think this is gonna be our pulley swap method. Thanks, great to see you and your guys spinning wrenches and having fun.
We love wrenching and fun! I have already swapped the back on my Poulan, but I am thinking of flopping the front pulley too now. Thanks for watching and good luck.
That video of pulley flipped over smart idea, Now how do I fix broken axle shaft inside transmission right at spline, crappy it broke there I'm pulling 6' x 4' trl on back with wood etc, using class 2- hitch on the original heavy plate, I had regular 38" cut rider by craftsman 12 hp
Just got a Murray with a shot deck free on Facebook. I am probably going to use this method to speed it up a bit just need to figure out the pulley sizes to figure out belt size needed. Thanks for the video!
I have an older Craftsman that's doing no good but it runs and drives. Looks like something to do eh? Dude is having one hell of a time with it! Good job!
When I did a pulley swap on my but I did the rear end and I went from a 8 inch pulley to a three and it was fast just with that but if I would have done the the front also it would have of been in the 40mph range
Watch my latest pulley swap on my Troy #6. It would fall off every time I pushed the clutch, but I made a sweet belt keeper and it stay on great now. Thanks for watching.
Wait, so that's it for a pulley swap? Just flip that front assembly over, drill if needs be? Ok yea a bigger belt but I thought I was going to have to buy pulleys or some other convoluted mess.
If you go on my channel you will see I have a 1985 14 hp Roper That my dad gave me I took off the electric clutch it’s slid right off I just can’t get the pulley off any ideas would be appreciated thank you
Sorry, just seeing your message. I suggest a torch if it is still stuck. If no torch, maybe grinder with cut off wheel. You might could also just change the back pulley. Thanks for watching
Do you think i could do this pulley flip method on a craftsman? I have an 03 LT2000 and am just getting into this stuff so trying to find an easy way to do things 😅
Just curious how you guys tipped the mower on it's side without all the fluids leaking out? (Edit) Also wondering if this works on mowers with a hydrostatic transmission if that makes any difference at all
I try to lean the mower so the carb stays up. Cut the fuel off if you can. I have pulley swapped two hydros and both double their speed, but I don't think you can get much more than double. I also don't know how long the hydros will last after swapping. Thanks for watching! Good luck!!
i agree with another comment those fnr transaxles are junk, the good news is it's not that hard to swap in a peerless or spicer, as for the jd my problems with the spicers always came from the input gear, the bearings would wear out on the input shaft and cause the gear to be misaligned and then strip out
can you do that to a 15 HP JOHN DEER LAWN TRACTOR do you know if its the same? Thanks other videos said they won't run if you do gov- or piston fall out or you have to do more work on it. never did it.
@chud327 How did you get 17mph out if the poulan? Did you flip the pulley? How'd Mower cut qirh the pulley fipped.? It be nice to keep the speed and have it cut as is.
I usually do pulley swaps to get speed, just recently I hit 44mph on a different poulan. Once I pulley swap them, I don't mow with them any more. You could do it as long as the grass is not too thick and the swap is not too extreme. Good luck and thanks for watching.
I am working on a 1999 craftmans riding lawnmower 19 hp, trying to flip the pully but there is a sleeve inside the collar. So I can't do the drilling mod any help please and thank you
@@chud327 ha ha i caught it! i saw lil Junior flip that gov. coming in the driveway lol nothing but fun, nothing but fun i also live in the deep South, im in SC and watching this brings back so many memories of my childhood riding go karts, 4 wheelers, 3 wheelers, mopeds etc.but this is a new kind of fun, and something you can do with everybody, (family friends), man i remember me and a buddy of mine we used work at this campground on the beach and we use to take the John deere gators in our leisure time to scour the camp ground for misc. you know (tv's, grills, radios, etc etc.) and sometimes they would tell us to check the storage yard, man that storage was massive! there was a road about 3/4 mile long a straight road at that... perfect dirt drag! and we would take them gators and cut loose with them, i pass him up then he'd pass me up, we had dirt and dust kicking up and flying everywhere we race them gators most of that summer of '99 chud until one day our supervisor pulled up on us.. some employees ratted us out of jealousy, and they banned us from the storage yd.after that so whenever i watch videos like this it just takes me back to those days, and not to mention hopefully one day soon in the future, as im thinking bout taking the deck off of my 2007 Troy built super bronco w/19.5 hp Kohler "courage" and go this route with her it's easier and cheaper plus i keep me about 1 ft. of chord in my pocket like i used to back in the day riding in them gators lol.
Hey man you seem to know the mowers. I got a yard machine that the engine drags to the point of one turn. It's done this before. BB ut the fix did t last long. I heard something about adjusting the values. Something about a cam pressure release? Can you help me..
That does sound like what it could be. I did a valve adjustment video on my silver bullet not too long ago, but I don't remember the title. I am sure others have done it too. Good luck and thanks for watching.
Hello my name is Jon im building a racing mower an just floped the pulley but can't find the belt u use I have the same style mower so plz just wear did u buy your belts or it
If you are talking about where the rear tires go on the axle, then no keys. The FNR's have flat spots on the axle and wheel that get rid of the keys. Thanks for watching.
What is a square plate underneath mine for the parkit parking brake and for the rabbit in low speed control and the hi speed control for the rabbit trying to figure out does that need to come off of my Mower and it's holding the pedals in what I do need to do after that
So I tried this but my pulley didn’t have the same size hole on the other side and it won’t slip over the shaft did you have to drill yours out or do I need to try and find one with a big hole on the other side
I timed it in the next video of doing the same thing to a troy bilt and it took about 7 minutes including flimming it too. I believe it was a 5/16 inch bolt and bit. thanks for watching.
dude i have 12,5 hp briggs and stratton engine on mine many things are wrong with it do you know any sulotiouns to the questions below. 1. it goes forward when the shifter is in neutral and the first speed backwards is neutral. 2. steeringwheel only turns about half a lap to the left and doesnt steer very far but is correctly on the other side. 3. is it even worth to make a quick build or does it have to little horsepower? 4. brakes started to litteraly burn on the first drive after many hours in the garage. 5. it only sound good in middle rpm at low it dies and at high it sputters and spits doenst run correctly. 6. cant start it with key but with another battery on the starter. 7. its a rusy boiii. Now it would make my day if you could help me solve any of theese problems above.
1 sounds like the shifter needs adjusted. 2. I would jack it up and turn it back an forth to see if I see any issues. 3. Don't have to have a bunch of ho for speed, I did 10 mph with a 5 horse pressure washing engine. 4. I don't have brakes on most parts f mine. 5. Maybe carb need cleaning, weak fuel pump or stopped up or kinked fuel line. 6. Wiring, key switch or solenoid. 7. I have a rusty one, I clear coated it like a rat rod. I hope some of these are correct and help out. Thanks for watching!!
Hopefully the mower makers have already experimented for us and picked the ideal blade speed, but I would love to know how it turns out if you try it. thanks for watching.
Wish you shown how you pulled the pully off i cant get mine off my roper ride on with a briggs and straton 8.5hp motor an i locked my 3 speed gearbox on it from mowing grrr got to pull it apart to see if I can fix it
@@chud327 no worries i wasnt being rude to you i just want to find some tricks cos the clutch isn't working thats why i locked up my gearbox. I cleaned the gearbox pully cos it was rusty but that didn't help then the next day as i was mowing long grass the box locked up on me. But was a great video cheers for posting it up mate.
Can you do this it without having to drill into the shaft ? Or can you buy another pulley ? This is my first time even wanting to do this and I need pointers .
My uncle used to do this for us back in the 80s with some old lawn mowers we would also put accelerator pedal on and bypass the governor sometimes he would open up the transmission and weld the limited-slip to posi rear.
This is the wholesome childhood kids should be getting, not phones and video games all the time. Very impressed with this lol
thanks so much and love the comment. I agree with you and thanks for watching.
Shut up boomer
I agree we got Chinese mini bike Chinese 150cc dirtbike cant afford the gooods
Everyone is different and enjoy doing different things. Every kid should get a childhood that they want, be it video games, or stuff like in the video.
@@eliforbes4842 Lmao, sure. You base that on what you think is fun. Times are different, technology has improved immensely compared to what you had during your childhood. What you think is better isn't a fact, it's just an opinion that is less valuable than today's children's.
Cheap riding mowers don`t last long because of the thin mower decks, but the motors last a long time, so converting them to fun riding machines is a great idea!
I think they make the deck cheap on purpose to sell more mowers. I would like a thick stainless steel deck, but good luck on that. Thanks for watching and yes they are great fun.
@@chud327 I just now replaced a 2003 Kabota diesel lawn tractor with 1800 hours on it, and I only did it because I wanted a zero turn, but that thing is built like a tank all over including the mower deck. Of course I did pay $6300 for it 20 years ago.
@@webman1956 yeah, out of my price range, but you get what you pay for. Love my zero turns, great decision!!
Teaching a boy about SPEED AND POWER!!!
Yes, gave them some physics lessons... Thanks for watching.
Purchased this to replace a guide pulley th-cam.com/users/postUgkxO9seYZjlnuP5UvMkb7osQW3WxPVeSnPk on our John Deere x304 snowblower. As I stated in the title, it is just about perfect. The stock pulley has a spacer at the bottom. I used four washers to emulate said spacer, and it works perfectly now. Great product, and great price especially if compared to typical JD prices.
for sure and thanks for watching.
I wish my dad had Patients. Looks like you enjoy the time you share together.
Wish I could do this full time... thanks for watching.
It had me weak when he reached up under there and bypassed the governor
Sagen Nc 😂😂 that 8 yr old kid just lifts the hood and fucking revs it I mean it’s cool there learning but but habitats are not goid
@@colerakocy2250 hes older then 8
Cole Rakocy nah he’s chillen
I used to do that as a kid on our one lawn tractor. It still runs lol
@@kennysboat4432 yeah I was I think 10 then
Definitely do this to your dads mower without permission. Me as my brothers did it to my dad when we were kids. Put the deck back on with the pins but didn’t connect anything. Dad went to move it out from the shed and put the back wheel through the sheet metal wall
Not funny then, but a cool story now .. thanks for watching
We had a manual one that went like 40 and oh boy was that sketchy 😂😂😂
I did 44, yes 🙌 t was sketchy… thanks for watching!
Put the deck back on and have some extreme fun cutting grass lol. Great job!!
That would be cool and thanks for watching.
The deck would be cutting slow
great video sir, I bought a large pully and Installed it but i had to move the motor back 1inch on my old Cad Cadet Hydro 1320 runs well for an old beast. I would love to get a set of the rear wheels you have. I'm in Australia and parts are just so expansive for old lawn tractors.
soon i will try sprocket and chain and gear it down a bit via a Jackshaft or just Install a CB250 engine as i only use the Cad Cadet to check the mail-box 1.5 km drive-way it a long walk from the house.
That will get you to the mailbox faster… thanks for watching!
Well quarintine and I got a spare tractor I can rebuild carb on get running and do this to. Got plenty of time. Fuck it.
Do it man and thanks for watching.
I bet 17 mph on a riding mower feels like 110 in a car.
In a way it does and thanks for watching.
How to spend more money on mower tires is what I got from this
Cuts grass in 8minutes or less
Awesome man! Me and my boy are building a Murray and I think this is gonna be our pulley swap method. Thanks, great to see you and your guys spinning wrenches and having fun.
We love wrenching and fun! I have already swapped the back on my Poulan, but I am thinking of flopping the front pulley too now. Thanks for watching and good luck.
@@chud327 you should take out the governor
That video of pulley flipped over smart idea, Now how do I fix broken axle shaft inside transmission right at spline, crappy it broke there I'm pulling 6' x 4' trl on back with wood etc, using class 2- hitch on the original heavy plate, I had regular 38" cut rider by craftsman 12 hp
If I have transaxle issues I usually just swap out for a different one. Thanks for watching.
"How to mow your lawn in 4 minutes"
😅😅
Funny and thanks for watching.
Not for the pulley I’m putting on it’s gonna be .01 seconds
How to lightly slap your grass with speed. This modification would make your blades spin at a terribly slow rate. A just for fun type mod
Just got a Murray with a shot deck free on Facebook. I am probably going to use this method to speed it up a bit just need to figure out the pulley sizes to figure out belt size needed. Thanks for the video!
Very cool, I love free! Thanks so much for watching
Some of the hydrostatic you can make the pedal go further and double the speed
I need to try that and thanks for watching
Lol, “we gonna flip em”. So awesome
1:50 did you see that oil filter.😬🤮
Yes, that is probably original equipment. Thanks for watching.
I have an older Craftsman that's doing no good but it runs and drives. Looks like something to do eh? Dude is having one hell of a time with it! Good job!
Yeah, we have a blast on all of them. Thanks so much for watching!
Great video ! I am interested in how long it takes before the FNR snaps in half.
We will see, there are two chances of it happening. I just flopped my Troy pulley too. Thanks for watching.
@@chud327 double the carnage and content ! Keep up the quality videos
@@chud327 9
When I did a pulley swap on my but I did the rear end and I went from a 8 inch pulley to a three and it was fast just with that but if I would have done the the front also it would have of been in the 40mph range
Yeah nah
I wanna do this with my dad but he says $200 for a riding mower on Craigslist is too expensive. That's pretty cheap for a ride mower
Johnny the the country boy I paid $50 Canadian for the one I got
Bro buy one that doesn't run and clean the carb... I bought 2 for $70
They need to lower it
That would help and thanks for watching.
Can not wait to see what your gonna do on your next video mate
Me too and thanks for watching. There is a video coming out 7PM my time tonight.
Great job dad! Those boys will grow up to be men who will do things like this with their children!
I sure hope so, that is one of the goals here. thanks for watching.
Hmm just so happens that this 14 year old here has one of the tools you were talking about in the beginning
That is the neighbors mower, he doesn't have it any more... Thanks for watching
Another awesome video, one of the only channels worth watching, keep it up👍👍
Love that comment and thanks so much for watching.
Cr
I think the child is hinting for a go cart...but then again those hillbillies love them mowers!!
I found one of these mowers at a farm we just bought and it runs
SCORE!
any way i could do this without drilling a hole in my crankshaft?
You could buy a pulley that would do the same thing and drilling required, I was just seeing how cheap I could do it. thanks for watching.
And does the belt fall off when you put the clutch in?
Watch my latest pulley swap on my Troy #6. It would fall off every time I pushed the clutch, but I made a sweet belt keeper and it stay on great now. Thanks for watching.
I wish I had a dad.
Sorry to hear you don't, but thanks for watching!!
One mans mower is another mans Ferrari. Sure saved me a lot hot roddin a mower instead of buying a Harley.
Well said, these things can be hot rodder really cheap. Thanks for watching.
BRAVO from an Englishman in a French forest... I have GOT TO try this! 💪🏆⚒️
It sure make a mower more fun to ride. thanks for watching.
Wait, so that's it for a pulley swap? Just flip that front assembly over, drill if needs be? Ok yea a bigger belt but I thought I was going to have to buy pulleys or some other convoluted mess.
Buying a pulley would be a little easier, you could skip the drilling. However, flipping is the cheaper method. thanks of watching.
Check the axle engage pull rod in back/ rear of John Deere, it's what puts it into nuetral
It is actually a manual now, but thanks for the suggestion and thanks for watching.
If you go on my channel you will see I have a 1985 14 hp Roper
That my dad gave me I took off the electric clutch it’s slid right off I just can’t get the pulley off any ideas would be appreciated thank you
Sorry, just seeing your message. I suggest a torch if it is still stuck. If no torch, maybe grinder with cut off wheel. You might could also just change the back pulley. Thanks for watching
Do you think i could do this pulley flip method on a craftsman? I have an 03 LT2000 and am just getting into this stuff so trying to find an easy way to do things 😅
Should work, but you probably have to drill the crankshaft and pulley. Then just need a bolt, nut, and belt. Good luck and thanks for watching!!
Just curious how you guys tipped the mower on it's side without all the fluids leaking out? (Edit) Also wondering if this works on mowers with a hydrostatic transmission if that makes any difference at all
I try to lean the mower so the carb stays up. Cut the fuel off if you can. I have pulley swapped two hydros and both double their speed, but I don't think you can get much more than double. I also don't know how long the hydros will last after swapping. Thanks for watching! Good luck!!
Certainly someone has thought to ask about the slower speed delivered to the mower blades?
Don't ask about mine, mine does not have blades anymore. Thanks for watching.
Can u try to swap the back pull and make a video, I have a yard machine gold and I want to pully swap the back but I can’t figure out how to do it
The back pulleys have splines and I don't know where to find them at... I always do the front on these types... Good luck and thanks for watching.
Yeeyee
i agree with another comment those fnr transaxles are junk, the good news is it's not that hard to swap in a peerless or spicer, as for the jd my problems with the spicers always came from the input gear, the bearings would wear out on the input shaft and cause the gear to be misaligned and then strip out
We will see how long it last, I am sure it will get a fair beating. thanks for watching.
What app do you use to see the speed?
It is called "speedometer" and was free. Thanks for watching.
How strong strong engine is? I have 50cc 12bhp. I want more speed. So if I do same like you. Will be okay for engine?
Hey water boy, I hope you like what I did to yo lawn mower
Funny and thanks for watching.
can you do that to a 15 HP JOHN DEER LAWN TRACTOR do you know if its the same? Thanks other videos said they won't run if you do gov- or piston fall out or you have to do more work on it. never did it.
Should work fine, but your mower might be different. Piston or gov should be fine as long as you don't turn it too hard... thanks for watching.
@chud327 How did you get 17mph out if the poulan? Did you flip the pulley?
How'd Mower cut qirh the pulley fipped.? It be nice to keep the speed and have it cut as is.
I usually do pulley swaps to get speed, just recently I hit 44mph on a different poulan. Once I pulley swap them, I don't mow with them any more. You could do it as long as the grass is not too thick and the swap is not too extreme. Good luck and thanks for watching.
I am working on a 1999 craftmans riding lawnmower 19 hp, trying to flip the pully but there is a sleeve inside the collar. So I can't do the drilling mod any help please and thank you
May have to just by a new pulley for it. Good luck and thanks for watching.
Cool
Thanks and thanks for watching.
I have a hydro transmission. Will the pulley swap make it die sooner?
I would think so. I would not do an extreme swap. I have heard you should not try it. Thanks for watching
What is the speed check for this one?
it double to about 12 mph, thanks for watching.
wow
Thanks so much and thanks for watching.
@@chud327 ur very welcome it's so cool to see how fast they can really go
I agree, I am in the process of doing the same thing to my Troy Bilt... Thanks for the reply.
@@chud327 very cool
Thanks, video coming soon.
What kind of lawnmower did you use? Also, do you need to drill a hole?
This was a yard machine, if you flip the pulleys, you have to drill because there is no key on the other end. thanks for watching.
What size drill bit do you use
5/16 drill bit an 5/16 bolt. Good luck and thanks for watching. Don’t forget your safety glasses:)
You flipped the Benny Hill switch!
That is funny and will go right over many reader's heads... Thanks so much for watching.
@@chud327 ha ha i caught it! i saw lil Junior flip that gov. coming in the driveway lol nothing but fun, nothing but fun i also live in the deep South, im in SC and watching this brings back so many memories of my childhood riding go karts, 4 wheelers, 3 wheelers, mopeds etc.but this is a new kind of fun, and something you can do with everybody, (family friends), man i remember me and a buddy of mine we used work at this campground on the beach and we use to take the John deere gators in our leisure time to scour the camp ground for misc. you know (tv's, grills, radios, etc etc.) and sometimes they would tell us to check the storage yard, man that storage was massive! there was a road about 3/4 mile long a straight road at that... perfect dirt drag! and we would take them gators and cut loose with them, i pass him up then he'd pass me up, we had dirt and dust kicking up and flying everywhere we race them gators most of that summer of '99 chud until one day our supervisor pulled up on us.. some employees ratted us out of jealousy, and they banned us from the storage yd.after that so whenever i watch videos like this it just takes me back to those days, and not to mention hopefully one day soon in the future, as im thinking bout taking the deck off of my 2007 Troy built super bronco w/19.5 hp Kohler "courage" and go this route with her it's easier and cheaper plus i keep me about 1 ft. of chord in my pocket like i used to back in the day riding in them gators lol.
Hey man you seem to know the mowers. I got a yard machine that the engine drags to the point of one turn. It's done this before. BB ut the fix did t last long. I heard something about adjusting the values. Something about a cam pressure release? Can you help me..
That does sound like what it could be. I did a valve adjustment video on my silver bullet not too long ago, but I don't remember the title. I am sure others have done it too. Good luck and thanks for watching.
Maybe at least give the kid a helmet, gloves, and boots ?
That is the neighbor kid, he already has a helmet, I don't know about boots and gloves. Thanks for watching.
Make one that mows at 11 mph and you'll have something.
That is so true and thanks for watching.
Hahahahaha I start my lawnmower the same way, my starter gave out
You better make that boy wear a helmet on that mower lmao. Shes probably doing 10-15 mph. That aint safe
I do 33 with no helmet and I’ve never got hurt
@@r.i.parthurmorgan5168 till something goes wrong and you bust ya head open
yeah, he could use a helmet. thanks for watching.
That is fast! Be safe and thanks for watching.
Lets hope not, thanks again.
Will this work on an old cub cadet
Them lipnlckey kids always up to some mischief 😆
I think there is a saying about oil filters like that one when the filters rusty the oil probably is too!
Yes, that oil filter is past its expiration date, probably by about 20 years... Thanks for watching.
Ahh when you go from turtle to rabbit
Exactly and thanks for watching
WOW
Hey how did you go with the variable speed pulley? Did it keep chewing thru belts?
I don't know about this I ne, but my Troy #5 has been pulley swapped for years. It does great and doesn't crew through belts. Thanks for watching!!
Great video u guys was having fun
How can I find a smaller pully for my transmission? My current one is 1A6460-25840
You may have to weld one up due to the splines. I changed the front only on mine. Thanks for watching
Hello my name is Jon im building a racing mower an just floped the pulley but can't find the belt u use I have the same style mower so plz just wear did u buy your belts or it
I get my belts from Tractor Supply. That one was a 73 inch by 5/8's inch. Good luck with your build.
Thanks for watching.
Great video 👍🇺🇲
Thanks so much and thanks for watching.
The rear trans axles have shift keys that when put through the ringer just sheer or chip away replace them and the problems fixed
If you are talking about where the rear tires go on the axle, then no keys. The FNR's have flat spots on the axle and wheel that get rid of the keys. Thanks for watching.
I wanna do this on my lawnmower
Very good job
It was super easy and works great. Thanks for watching.
What is a square plate underneath mine for the parkit parking brake and for the rabbit in low speed control and the hi speed control for the rabbit trying to figure out does that need to come off of my Mower and it's holding the pedals in what I do need to do after that
I am not sure with out seeing it... Good luck and thanks for watching.
I wanna pully swap my Murray how did you do the hot rod Murray if you don't mind me asking bc mine is the same as that one
I suggested pulley swapping, gas pedal, atv tires. Thanks for watching.
Great video but please tell your young test driver to do the next test drive a bit further from the electric fence, that part made me nervous
Yeah, he is older now and a out to move to a vehicle. Thanks for watching!
So your being like grampa from heart land's we're he has multiple trucks but he uses the parts on one lol
Yes and thank you for watching
So I tried this but my pulley didn’t have the same size hole on the other side and it won’t slip over the shaft did you have to drill yours out or do I need to try and find one with a big hole on the other side
I didn't have to drill mine, you may have to drill or find a different one. Thanks for watching!!
Dose the mower have enough power to tow after the pulley swap?
All mine still tow great, first gear still pulls great. Thanks for watching!!
Anyway you could tell me what size belt I would need to do that on my craftsman lts 1500
I am not sure, I usually take mine to the store and try on a few to find the right size. Good luck and thanks for watching.
Reminds me of growing up . Instead of bikes my dad gave us lawnmowers haha I had one with a swivel boat seat 💺
That's awesome! Then I got colonel craftsman, it had a boat seat... thanks for watching.
So how long did it take you to drill through that drive shaft and what bits did you use?
I timed it in the next video of doing the same thing to a troy bilt and it took about 7 minutes including flimming it too. I believe it was a 5/16 inch bolt and bit. thanks for watching.
I'm gonna do this too my tractor, if I ever have a kid when I'm an adult I'll get them a tractor. I'm only 14 though.
That would be cool! Thanks for watching!
im sad i dont have lawn tractors were i live
So your telling me to
Change the power and speed on any mover you just get a larger pulley?
Maybe not on a hydro, you can also do smaller in the back. Thanks for watching!!
Did yours fit snug or loosely when u flipped it
Pretty snug, but slid right on, thanks for watching.
I'm sold. Ik wat I'm doing wen I get home
Is this lawn mower hydrostatic?
no it a manual FNR trans. Thanks for watching.
dude i have 12,5 hp briggs and stratton engine on mine many things are wrong with it do you know any sulotiouns to the questions below. 1. it goes forward when the shifter is in neutral and the first speed backwards is neutral. 2. steeringwheel only turns about half a lap to the left and doesnt steer very far but is correctly on the other side. 3. is it even worth to make a quick build or does it have to little horsepower? 4. brakes started to litteraly burn on the first drive after many hours in the garage. 5. it only sound good in middle rpm at low it dies and at high it sputters and spits doenst run correctly. 6. cant start it with key but with another battery on the starter. 7. its a rusy boiii. Now it would make my day if you could help me solve any of theese problems above.
1 sounds like the shifter needs adjusted. 2. I would jack it up and turn it back an forth to see if I see any issues. 3. Don't have to have a bunch of ho for speed, I did 10 mph with a 5 horse pressure washing engine. 4. I don't have brakes on most parts f mine. 5. Maybe carb need cleaning, weak fuel pump or stopped up or kinked fuel line. 6. Wiring, key switch or solenoid. 7. I have a rusty one, I clear coated it like a rat rod. I hope some of these are correct and help out. Thanks for watching!!
thank you man. not often you see youtubers answering their followers. you deserve more subscribers! @@chud327
this really helped ill see what i can do@@chud327
but they should show how fast it goes by each foward speed gear
Good idea and thanks for watching!!
So theoretically, we could do the same thing with the mower blades if we wanted a faster Blade spin for a better cut ????
Hopefully the mower makers have already experimented for us and picked the ideal blade speed, but I would love to know how it turns out if you try it. thanks for watching.
Wish you shown how you pulled the pully off i cant get mine off my roper ride on with a briggs and straton 8.5hp motor an i locked my 3 speed gearbox on it from mowing grrr got to pull it apart to see if I can fix it
This one came off easy, I have some video of getting tougher ones off too. thanks for watching.
@@chud327 no worries i wasnt being rude to you i just want to find some tricks cos the clutch isn't working thats why i locked up my gearbox. I cleaned the gearbox pully cos it was rusty but that didn't help then the next day as i was mowing long grass the box locked up on me. But was a great video cheers for posting it up mate.
I have. A John Deere L110 hydrostatic trans it has same pulley setup on front will the work or blow the trans?
You can try, but I hear it not too good on hydros...
Carburetor is surging please replace even go faster. Just saying
Good tip and thanks for watching
Can you do this it without having to drill into the shaft ? Or can you buy another pulley ? This is my first time even wanting to do this and I need pointers .
You can buy a new pulley and not drill the shaft . I usually get mine from Tractor Supply. Good luck and thanks for watching.
@@chud327 thank you so much!!!
My uncle used to do this for us back in the 80s with some old lawn mowers we would also put accelerator pedal on and bypass the governor sometimes he would open up the transmission and weld the limited-slip to posi rear.
That sounds like my kind of guy! Thanks so much for watching.
i have an old jon sered lawn mower from 1997 that im gonna restore hehe
Sounds sweet, good luck on your build and thanks for watching.
I did that with my cub cadet zero turn!
Nice and thanks for watching