This is the best example of a non narrated video I have seen. The music was barely noticeable, just how most people like it, and the pace of video/editing/cuts was spot on. Awesome video!
For a "salvage parts" job, this is really pretty hi-tech. That CAD fender design he was using was just the thing for backyard garage fabrication! (Cardboard Aided Design!!) Nice job!
Drill jigsaw welder pressure washer go kart axle go Kart tires chain an engine (unless your using a stock engine then you just need a pulley swap) screw driver kit (maybe wd40 and a de rusting liquid or smth) if your gonna repaint it get paint thinner paint and an airbrush if ur gonna wrap it get wrap and a wrapping kit maybe a bucket seat or a new lawn mower seat and maybe a couple more things I'm missing but that's about it
These can be pretty fun once you get them all done, I put a 25 hp on the one I built and it did about 55 before you would get to scared to keep going lol. Have fun and stay safe as the stock seat is pretty slippery around hard corners.
I was thinking the same thing... I have an E180 with the 25hp V-Twin. The only draw back is I'd have to find something else to mow those six acres out there that just keep growing. I was just thinking of the reaction I'd get from the local sheriff's deputy when I go blasting past his coffee stop on that thing doing 50-60 mph with either a big grin or that other look, just before I'm gonna die!! 😂🤣
Your skills are absolutely amazing. The projects you make are incredible. I'd love to have an ounce of your talents. Keep up the awesome work. Can't wait for part 2
I have a one that was a lot easier to do. Razor drift cart yank the electric motor dropped a predator 212 on it and some mower fenders and now it's a drift mower 😂 melted the tires on it twice and I've only been riding it like a week and a half or so 🤷
The cheapest easiest way would be a live axle with a Jack shaft and centrifugal belt drive then chain drive on the main drive or even better put a double v-belt with a idler and trampoline spring with a linkage clutch pedal and a 670 v-twin Predator out front sounding roudy af! Awesome video and good work I know you sure put some time in on this build.
You know its amazing how many comments contained the similar phrase or wording " why didnt you"or " you should've " do this or done that , why ? Because he did what he wanted to , and thats what makes an artist what he or she is ,,,, its producing something from an idea to actual physically existent object , the fact that it actually works in the end is jus the cherry on top , but as with most fabricators or builders , there projects are never truly " done" as there's always room for improvement, but i guarantee,,,,, long story short , not one of yalls trolls ideas will have an ounce of reflection to whatever the improvement or refinement may happen to be💯
Hats off to this creator aswell as the " mycustomgocarts" guy, yall both took some boring ass wheel horse lawn mowers and did your damn thing to come out with bad ass race tractors , notice i left "mowers" out of the description of the final products jusr as the zero turns did when they came out on the scene 😂
Yeah and its damn shame he ruined this one. Working mower with only some surface rust and few bits needing to replace that you can make in garage shop... nope lets just rip it into peaces and hack everything so it will be toyed for year or two until sent to scrapper, while if little love was given it would have served well the rest of the century... Problem is you can get these old reliable ones no more and new ones are garbage designed to fail and be hard to impossible to manufacture replacement at home.
Ok... I've lost it lol. This mower is moving forward in the very beginning of the video but the tires in the rear are not rotating and they are dragging. Am I the only one that caught that? I mean maybe it's a camera glitch, but it sure does look funny.
As for restoration work, this is truly high-tech. The CAD fender design he's using is just the thing to build a backyard garage! (Design backed with cardboard!!) Great job!
im not sure if you where aware but your brakes wont work properly if the bleader is at the bottom of the caliper you would have to flip the caliper around no hate just letting you know from expirience
Im 16 and im speaking from experience now Go to all the yard sales you can find, save up money and go to scrapyards and ask if you could have a look around Go to repair shops and bike shops and ask if they have old bike engines or old running motors that you can buy or just ask friends and family if they have old lawnmowers or other stuuf that you can buy or have
Put a real engine in it , like a V6 2 stroke outboard motor. This is a project i will be taking on soon ! The more complex the project! The better ❤ Nice Craftsmanship other wise!
Because that not what lawn mower racers are about it's bare frame and sketchy as hell..sketchy=fun that's the point of a mower racer a toy that goes fast that didn't costs thousands of dollars
Because the drag link between the two axles has no adjustment, so unless he cut the drag link to the exact dimension (which is doubtful) there is no way of getting the toe in/out correct. The front axles also has quite a bit of positive camber this will not help in a racing situation. The steering also needs good Ackerman angles to work correctly.
PART 2: th-cam.com/video/gCKAjasb7UY/w-d-xo.html
I don’t know why but I think this needs handle bars rather than a wheel
❤
What year
😊😊
This is the best example of a non narrated video I have seen. The music was barely noticeable, just how most people like it, and the pace of video/editing/cuts was spot on. Awesome video!
🎉❤😊😊
For a "salvage parts" job, this is really pretty hi-tech. That CAD fender design he was using was just the thing for backyard garage fabrication! (Cardboard Aided Design!!) Nice job!
This man's creative power is fantastic, congratulations.
Awesome build Doctor.May need a rollbar ;) /Sjajna konstrukcija doktore. Možda će trebati rollbar ;) .
Can you give us a list of parts we need?
No
95% is fabricated, a parts list will do nothing for you
Lawnmower
Metalworking tools
@finianmcelhany3904 he bought stuff for it and the tools you need could be included with that list too
Drill jigsaw welder pressure washer go kart axle go Kart tires chain an engine (unless your using a stock engine then you just need a pulley swap) screw driver kit (maybe wd40 and a de rusting liquid or smth) if your gonna repaint it get paint thinner paint and an airbrush if ur gonna wrap it get wrap and a wrapping kit maybe a bucket seat or a new lawn mower seat and maybe a couple more things I'm missing but that's about it
These can be pretty fun once you get them all done, I put a 25 hp on the one I built and it did about 55 before you would get to scared to keep going lol. Have fun and stay safe as the stock seat is pretty slippery around hard corners.
I was thinking the same thing... I have an E180 with the 25hp V-Twin. The only draw back is I'd have to find something else to mow those six acres out there that just keep growing. I was just thinking of the reaction I'd get from the local sheriff's deputy when I go blasting past his coffee stop on that thing doing 50-60 mph with either a big grin or that other look, just before I'm gonna die!! 😂🤣
Just finished the restoration on my 111 today and came inside opened youtube and found this
Nicee 👌
Your skills are absolutely amazing. The projects you make are incredible. I'd love to have an ounce of your talents. Keep up the awesome work. Can't wait for part 2
this looks so easy to make but so complex
I have a one that was a lot easier to do. Razor drift cart yank the electric motor dropped a predator 212 on it and some mower fenders and now it's a drift mower 😂 melted the tires on it twice and I've only been riding it like a week and a half or so 🤷
wow this guy is pretty smart i had no clue why he was cutting off part i thought were perfectly fine
So Amazing Tractor ❤
Bel progetto, bel lavoro.
🛠️🔩🔧🚜👍👍👍
Great too watch, good work, I got a Greenfield ride on but it's to nice to turn into a racer! I shall buy another for that!
Nice job ! A piece of art !!
This guy has such good attention to detail love it 👍
bro really meant it when he said disassembling it :) good job mate!
Fine build. Put a razor sharp front skirt blade on it and it may still give you a record speed dandy short lawn
Congrats Doctor D.S. , on making a Race Lawn Mower out of a substitute.
The cheapest easiest way would be a live axle with a Jack shaft and centrifugal belt drive then chain drive on the main drive or even better put a double v-belt with a idler and trampoline spring with a linkage clutch pedal and a 670 v-twin Predator out front sounding roudy af! Awesome video and good work I know you sure put some time in on this build.
how hard this man works for us, great support
Can’t wait for part 2 😍👏🏽
You know its amazing how many comments contained the similar phrase or wording
" why didnt you"or " you should've " do this or done that , why ? Because he did what he wanted to , and thats what makes an artist what he or she is ,,,, its producing something from an idea to actual physically existent object , the fact that it actually works in the end is jus the cherry on top , but as with most fabricators or builders , there projects are never truly
" done" as there's always room for improvement, but i guarantee,,,,, long story short , not one of yalls trolls ideas will have an ounce of reflection to whatever the improvement or refinement may happen to be💯
😉❤️
Hats off to this creator aswell as the " mycustomgocarts" guy, yall both took some boring ass wheel horse lawn mowers and did your damn thing to come out with bad ass race tractors , notice i left "mowers" out of the description of the final products jusr as the zero turns did when they came out on the scene 😂
I would have put a 1000cc superbike engine in it
brother, you would launch yourself at a bit of a speedbump
Very nice work and entertaining video! John Deere would definitely approve of your workmanship.
Lot of work!!😮
Only just stumbled across this Channel, I love it! Amazing work
Got a link to a new kart clutch that you attached to the 200cc engine? Also do you know the gear ratio?
These videos are awesome it just sucks it’s like “yea to build this first have 100k dollars in tools and a garage and random parts”
It's not that expensive for a 300$ welder a 80$ saw and a 40$ wrench kit and a 80-100$ drill
But the engines about 400-500 unless you find a good used one
If you think that's $100k in tools, you probably don't have the skills to do it anyways.
Doctore,svaka čast za trud i vreme....👌Veliki pozzz za tebe👋
After this john deere lawnmover price will sky rocket 😂
I think it’s a cool idea,nice looks good
i want your garage with every thing in it
Amazing what you can do with just an angel grinder and a mig welder
Your video is fantastic!
Built the whole thing with cheap einhell tools… those things must no be to bad because his seem to work fine 😂
😂😂😂😂the exhaust pointing right at the dash
Wow, this is really cool! I really want to make something like this myself. How long did it take you to make the whole thing?
What type of clutch is that
Now.....give it an entire new paint job and new seat!!
Nice fast moving fabrication video! Turned out low to the ground! All good!
On the road again.👌
Back when they built decks that didn’t fall apart.
Yeah and its damn shame he ruined this one. Working mower with only some surface rust and few bits needing to replace that you can make in garage shop... nope lets just rip it into peaces and hack everything so it will be toyed for year or two until sent to scrapper, while if little love was given it would have served well the rest of the century... Problem is you can get these old reliable ones no more and new ones are garbage designed to fail and be hard to impossible to manufacture replacement at home.
Ok... I've lost it lol. This mower is moving forward in the very beginning of the video but the tires in the rear are not rotating and they are dragging. Am I the only one that caught that? I mean maybe it's a camera glitch, but it sure does look funny.
Camera glitch and the editing I thing you can see its rotation in the hub 0:18
Oh Wow , i have a JD-111 and use it all the time for my 1 acre lot ,, bit old but gets the job done ,,,,
You did a no no. By Jacking the lawnmower up and not blocking the wheels and putting jack stands under it. God bless you Chaplain Dale Stearns
😢p😊😊😊😊😊😊😊😊😊😊😊😊
why am i the only one commenting on the alignment of the front wheels 😂😂
Nvm it’s awful
Love your work. Think you should add some suspension
Odličan video.
Where can I find one of those clutches? That thing is bad ass ! Thanks
Entertaining project. Very nice...
It seems as though this isn’t your first time doing this, if someone wanted to buy one of these, have a ball park figure at all?
As for restoration work, this is truly high-tech. The CAD fender design he's using is just the thing to build a backyard garage! (Design backed with cardboard!!) Great job!
That thing is so much slower than I expected
he was hardly on the throttle..
@@Gizmos_and_stuff why not try flooring though? It is supposed to be a race mower
@@Akotski-ys9rr i dont know, but its unfair to call it slow after seeing is barely even going
Koliko ti men3 iznerviras kada sve napravis,i onda radi jednog sitnog dijela sve rastavis😂
when your wife makes you mow the lawn but you gotta get back to the game:
Doktore izbacio si motor od oko 500 kubika da bi stavio ovaj od 200... diferencijal stare lajke menjac i motor neki od jugica benzinac pa da vidis :)
Which program do you use for editing?
I love your videos🤩
im not sure if you where aware but your brakes wont work properly if the bleader is at the bottom of the caliper you would have to flip the caliper around no hate just letting you know from expirience
It doesn't look like this is the first time you've done this, The precision alone required to make it work is an amazing mechanical feat.🌸💐
In my farm we just have a random 14hp mower factory maybe we will file the head down for higher compression and swap the pulley system around.
weld the parts that hold with bolt to the frame and add a little of positive caster to the front wheel you going to like this
you weld everything in part 2 sorry 😅
I assume there was a reason that you didn't spray paint things and just put em back rust and all. 🤔
watch till end lol its in next part
I was thinking the same thing lol
Good job 👍👍👍
Hello Dr D.S , what happened to the BMW Ute? Any more plans for it?
I love it!
Dose anyone know where i can find a step by step tutorial?
I am 15yo and I always want to do stuff like this but don't have materials.
Im 16 and im speaking from experience now
Go to all the yard sales you can find, save up money and go to scrapyards and ask if you could have a look around
Go to repair shops and bike shops and ask if they have old bike engines or old running motors that you can buy or just ask friends and family if they have old lawnmowers or other stuuf that you can buy or have
@@pietervanemmenis4347 🫡thank you I will!
Perfect video.
This retirement promises to be eventful 😁🏁🤩👍
so cool
Nice one but how do cut the grass now ?
It's called goats and cows. 😅
Bolje da si ubacio 125icu od neke krose pa makar orion marke
Hidro ručna na kontra strani, pa ti si najjači
I built a 111 aswell (same tractor) but used the factory drivetrain and motor
This seems firmiliar, didnt another guy do this exact same thing??
yes jake from mycustomgokart
Everyone dod this exact thing 2 years ago, i had a pulley swapped vtwin mower
It was a 108
I put a 3.5 gallon "Rat-Rod" tank on my LA145.
next time use aluminum for fender and seat frames. less weight= go faster
Go pet 'yer Racoon...meh
are u eating the peyote buttons again !! @@wolfguardian8312
Looks cool
Treba jači motor samo 😉
pozdrav
da li mozda prodajes ostatke od john deere 111
(diff , pto, motor , kosiste, itd )
Ako su ti potrebni javi se na Instagram 😉
Really like this build, what would it cost to build this?
What Clutch is that
Put a real engine in it , like a V6 2 stroke outboard motor.
This is a project i will be taking on soon !
The more complex the project! The better ❤
Nice Craftsmanship other wise!
A v6 is not fitting in that TF, and what you talking about a "real" engine wtf makes a real engine 🤣
At this point should of just bought a go cart frame
Jel nebi moz bilo lakse kontrolirati da napravi na nozni gas
Trebao si odradit restauraciju nego uništit ovaku mašinu
Привет Док!интересная переделка,лайк!👍но почему газ не педаль?да и заводилку надо удлинить чтобы заводить из кабины
Nice!
❤❤❤❤
im 13 yo me and my classmate are trying to turn a john deere 108 in to a racing mower his dad has two 108 we are trying to mack 1 good one
Please 🙏 make more videos I like your channel/videos
Why you didn't put on 3 cylinder engine,4x4,servo,suspension and off road tires or drive tire. Why not?
Because that not what lawn mower racers are about it's bare frame and sketchy as hell..sketchy=fun that's the point of a mower racer a toy that goes fast that didn't costs thousands of dollars
How did you determine where to set the height of your front suspension
Im gonna make one out of a newer model but ima use this for referance
when is part 2 comming
nice build whens pt 2
am i the only one that thinks he resembles kimi raikkonen a bit?
Anyone know what engine he dumped into the mower?
looks like a predator 200 idk
Race Tractor...meh I Like it...
I was going to attempt this then I remembered I don’t know how to weld.
The toe on the front wheels is crazy... why?
Because the drag link between the two axles has no adjustment, so unless he cut the drag link to the exact dimension (which is doubtful) there is no way of getting the toe in/out correct. The front axles also has quite a bit of positive camber this will not help in a racing situation. The steering also needs good Ackerman angles to work correctly.