so this is M90 gear box and it can be instaled to T5 engine without modifications, just like stock? and it means that M90 can be instaled to B8444s without modifikations? is it right? some body please tell me about that and sorry for my english
@@BackmansGarage thanks for your answer, i want to send you a picture of two bellhouses, can you look? There are one from b5254t(i think so) and another from b8444s
Hey Backman, I'm in the middle of a T-5 / M90 build for my 88 Volvo 780. However, I am using the older type Flywheel and Clutch/Pressure plate so I avoid the problems with the Dual Mass Flywheel system.. Curious as to why you selected the DMF setup?
Nice! 👍 I did not select it. It was installed on the engine from the beginning and to save some time, and money I just decided to use it again since I probably won't exceed the stock performance figures. I cant see how it would matter. I will probably have the only 740 T5 in the world with a dual mass flywheel 😅 Once it starts slipping or vibrating I will upgrade the flywheel, pressure plate and disk to something aftermarket and non dual mass. //Backman
Hi man! I'm also a little disappointed with DMF. The old DMF loses flexibility and is made between two halves (even when stock riding). As one of the few people on the B5244T5, i welded DMF- "hard". You handle a welder very well - easy work for you. SMF great thing, I'm absolutely satisfied. Otherwise swap from you excellent. Thanks for the high quality video! Hello! Thomas.
Hi! I did mention this in a previous video. These are from a Swedish company called Andersson steel and speed. Not sponsored. They make all kinds of engine mounts for engine swapping www.anderssonsteelspeed.se/webshop-bil If you want to buy them: www.l-m-r.se/c/brands/andersson-steel-speed/
Är en b5254t en t5a? Trodde det va b5234an som va t5. Kanske jag som missat något. Uppskattar svar. + bra kvalitet på dina videos väldigt intressanta och informativa
Hej, i've been watching your channel for a while. Two years ago i bought a 940 near Stockholm and bring it to Germany (where i live). I had the same Plan as you from the beginning (T5-Swap). Now we both are at the same point, my T5 engine is in the car and I'm doing the wiring at the moment. Looking forward to your next Videos. I hope you Show some Details especially about the differences between the fuel pump Relais.
@@BackmansGarage I'm about to use the Motronic 4.3 the 850 T5 came with. I need this to get german "TÜV" - that means Inspection/Admission... Otherwise the car wouldnt be allowed to take part of the public traffic.
Ok, I will not be running with the motronic. But iam thinking about a way to make a video showing both the m4.3 motronic installation and the maxxecu installation. I will see what I can do 👍
Ja, tips nummer 1 är att inte starta en TH-cam kanal och skaffa barn samtidigt som du skall bygga din 740... Annars är det lite smaken som baken vilken motor man väljer, fästen finns till det mesta. Finns ju förstås en uppsjö med tips innan man påbörjar ett sånt här bygge men något speciellt utöver tid, plats, verktyg och pengar så nej, det mesta klurar man ut längs med vägen. Skulle ju försöka hålla mig till BMW / Volvo då det är vanligast och kanske är bäst att börja med. Sen ska man inte underskatta en välbyggd B230 heller för den delen :)
Thank You for telling me that, I was just sitting here a couple of hours ago thinking about the fact that i had called it an M12 two times now in this series and it's about time to start calling it by the real name :D
Haha, Got the cat but she's got her hands full and absolutely hates the garage. Maybe a garage cat ? All four of my traps have been full everyday, it's a crazy year for the mice this year.
If you have a farmer's supply close to you, ask them what they sell to farmers. A lot of equipment gets stored for months on end, and cats can't get inside tractors, combines, etc., so they usually have to put a deterrent inside the equipment to keep mice out.
@@BackmansGarage aa kollade hans kanal nu o det var borta, blev bara så fundersam när jag blev rekommenderad en av dina videos men det var nån annan som hade laddat upp.
What is your favorite method of getting rid of mice? Please comment down below :D
Hagelbösa
Peanut butter on mouse traps
Bring in rats! The mice will take off! lol
@@bobjohnson205 I would rather bring in the hill-billys, they will escape with the mice.
Called a ditch line...really enjoy the effort for english as you are a big help young man.
I loaded up all these videos in a row just to watch them. I don't even have a 700 or 900 series. But they are a JOY to watch!
Thank You, Means a lot
so this is M90 gear box and it can be instaled to T5 engine without modifications, just like stock? and it means that M90 can be instaled to B8444s without modifikations? is it right? some body please tell me about that
and sorry for my english
I dont beleve the gerbox will fit the B8444s engine. It would not be a good decision anyway since it is way too weak of a gearbox for a V8.
@@BackmansGarage thanks for your answer, i want to send you a picture of two bellhouses, can you look?
There are one from b5254t(i think so) and another from b8444s
Looking great, the VVT video was great too.
entertainment at its finest 💯
Hey Backman, I'm in the middle of a T-5 / M90 build for my 88 Volvo 780. However, I am using the older type Flywheel and Clutch/Pressure plate so I avoid the problems with the Dual Mass Flywheel system.. Curious as to why you selected the DMF setup?
Nice! 👍
I did not select it. It was installed on the engine from the beginning and to save some time, and money I just decided to use it again since I probably won't exceed the stock performance figures. I cant see how it would matter. I will probably have the only 740 T5 in the world with a dual mass flywheel 😅
Once it starts slipping or vibrating I will upgrade the flywheel, pressure plate and disk to something aftermarket and non dual mass. //Backman
Hi man! I'm also a little disappointed with DMF. The old DMF loses flexibility and is made between two halves (even when stock riding). As one of the few people on the B5244T5, i welded DMF- "hard". You handle a welder very well - easy work for you. SMF great thing, I'm absolutely satisfied. Otherwise swap from you excellent. Thanks for the high quality video! Hello! Thomas.
Thanks 👌👍
I will be swapping out the dmf for a stock solid on this new engine build. Hopefully i got the right one 🤔
Det går ju framåt! Bra video som alltid 👍
Tackar 😃👍
What motormounts did you use? Or is that done in previous video?
Hi!
I did mention this in a previous video. These are from a Swedish company called Andersson steel and speed. Not sponsored.
They make all kinds of engine mounts for engine swapping
www.anderssonsteelspeed.se/webshop-bil
If you want to buy them:
www.l-m-r.se/c/brands/andersson-steel-speed/
@@BackmansGarage Thank you!
Is it possible to use the stock mounts from the 6 zylinder of the 960 ?
Är en b5254t en t5a? Trodde det va b5234an som va t5. Kanske jag som missat något. Uppskattar svar. + bra kvalitet på dina videos väldigt intressanta och informativa
Kvalitet som vanligt!
Tack! 👍
Hej,
i've been watching your channel for a while. Two years ago i bought a 940 near Stockholm and bring it to Germany (where i live). I had the same Plan as you from the beginning (T5-Swap). Now we both are at the same point, my T5 engine is in the car and I'm doing the wiring at the moment. Looking forward to your next Videos. I hope you Show some Details especially about the differences between the fuel pump Relais.
Thanks man! There will be a video about all of this, and I plan to do this very detailed.
What emu do you plan on useing?
@@BackmansGarage I'm about to use the Motronic 4.3 the 850 T5 came with. I need this to get german "TÜV" - that means Inspection/Admission... Otherwise the car wouldnt be allowed to take part of the public traffic.
Ok, I will not be running with the motronic.
But iam thinking about a way to make a video showing both the m4.3 motronic installation and the maxxecu installation. I will see what I can do 👍
jävligt underhållande å kolla på🤟
Tackar!
Jag funderar på att sätta i en t5 eller någon BMW motor i min 744 -85 förgasare, har du något tips som jag bör tänka på innan bygge?
Ja, tips nummer 1 är att inte starta en TH-cam kanal och skaffa barn samtidigt som du skall bygga din 740...
Annars är det lite smaken som baken vilken motor man väljer, fästen finns till det mesta.
Finns ju förstås en uppsjö med tips innan man påbörjar ett sånt här bygge men något speciellt utöver tid, plats, verktyg och pengar så nej, det mesta klurar man ut längs med vägen. Skulle ju försöka hålla mig till BMW / Volvo då det är vanligast och kanske är bäst att börja med. Sen ska man inte underskatta en välbyggd B230 heller för den delen :)
🔥🔥🔥
The bit is called a triple square
Thank You for telling me that, I was just sitting here a couple of hours ago thinking about the fact that i had called it an M12 two times now in this series and it's about time to start calling it by the real name :D
@@BackmansGarage haha no problem! They’re used a bunch on vag cars, and when I worked at an Audi/VW dealership I had to grab a set.
@@BackmansGarage Also called an XZN. M12 is the size.
du kan använda 760 v6 kräningshämmare
Precis, Har försökt att få tag en sådan ganska länge nu. Får se hur jag lyckas lösa det problemet. //Backman
Backmans Garage fanns på lmr förut, kanske fortfarande gör de:)
I wish I had an M90
If it's what I think it is, I'd just call it a ditch. Also, get a cat. Lol
Haha, Got the cat but she's got her hands full and absolutely hates the garage. Maybe a garage cat ? All four of my traps have been full everyday, it's a crazy year for the mice this year.
If you have a farmer's supply close to you, ask them what they sell to farmers. A lot of equipment gets stored for months on end, and cats can't get inside tractors, combines, etc., so they usually have to put a deterrent inside the equipment to keep mice out.
Let the mice run around, they do your Volvos and parts no harm - or take a Cat.
Såg att det var någon som snott/kopierat dina videos, hans kanal heter palomeu filho
Hej, jag hade fullt upp med detta igår och vad jag kan se så är det löst nu iaf :) //Backman
@@BackmansGarage aa kollade hans kanal nu o det var borta, blev bara så fundersam när jag blev rekommenderad en av dina videos men det var nån annan som hade laddat upp.