4 Floating Shelves From Beginner to Expert Level
ฝัง
- เผยแพร่เมื่อ 19 ส.ค. 2023
- 📽️ WHAT TO WATCH NEXT
Organize any Workspace - • 11 Simple Ways to Orga...
Cheap Tools Every Woodworker Should Have - • Why doesn't every wood...
How to Build Cabinets - • How to Build Wall Cabi...
✅️ TOOLS AND SUPPLIES IN THIS VIDEO:
Amana Countersink Drill Bit - amzn.to/44kJlv3
Stud Buddy - amzn.to/3DX4L6S
Shepherd Bracket - amzn.to/3qw2nRB
Wood Owl long drill bit - amzn.to/45dafX2
Right angle drill adapter - amzn.to/3OxTq22
Level - amzn.to/3YFAvXy
Laser level - amzn.to/44sGv7H
Pipe bracket parts (2-4 each)
8” pipe - homedepot.sjv.io/VmBNbA
Pipe cap - homedepot.sjv.io/g1gGAr
Flange - homedepot.sjv.io/XYONLo
My LED Light Setup
LED Light strip - amzn.to/44dgJE7
LED Aluminum track - amzn.to/44emZvi
LED Jumper cables - amzn.to/44fLFDy
LED FCOB Controller/Dimmer - amzn.to/3P0ncOe
On/off button - amzn.to/3QFDBsT
12v Power Source - amzn.to/3QElfZe
Patch cable - amzn.to/3QJCvwg
AV cable management cover - amzn.to/3QHAb8U
Fish tape - amzn.to/3QKlTUV
✅️ PROJECT PLANS:
The Whole Enchilada Plan Bundle (Save 65%) - mwawoodworks.com/product/the-...
✅️ HOW TO SUPPORT MY CHANNEL
Join my Patreon community: patreon.com/MWAWoodworks
Get Project Plans: bit.ly/download-project-plans
Get some MWA Woodworks Logo Merch: www.mwa.keyapparelstore.com/
SUBSCRIBE : th-cam.com/users/mwawoodworks?...
✅️ LIST OF THE TOOLS I USE IN MY SHOP : bit.ly/tools-i-use
*Disclaimer - As an Amazon Associate I earn from qualifying purchases
✅️ Other Affiliate Partners
Bits and Bits Co. - 10% OFF using code MWA10 - bit.ly/48Pw5Cq
TSO Products - tsoproducts.com/?ref=MWAWW
Taylor Toolworks - lddy.no/1gngh
✅️ MWA WOODWORKS ON SOCIAL
Instagram: / mwawoodworks
Facebook: mwawoodworks
Pinterest: / mwawoodworks
---------------------------------------------------------------------------------------------------------------------------------------------
In this video I'll show you what it takes to go from DYI to pro level floating shelves
#diyprojects#woodworkingproject#howto - แนวปฏิบัติและการใช้ชีวิต
Pro tip, if you're going to paint steel pipe clean it with a good degreaser. Whether that be brake parts cleaner, acetone or alcohol. The pipe is oily and super dirty. If you try to paint over that you're gonna have a bad time.
Good tip.I cleaned mine with alcohol.
If the pipe it's not galvanized just take a torch and burn the grease and dust on it, it's quite faster when everything is covered on grease and have been sitting in a dusty warehouse for some time.
If the pipe is galvanized don't ever put it in fire, it's really toxic
Love the progression between projects. Great tutorial!
Thanks!
impressedf he kept that drill bit drywall accident in the final cut. shows hes got humility, likable dude, i just cant figure out why he never answers the door when i show up drunk middle of tyhhe ne nihgt, what major weirdo hehe, jk ;]
Impressive workmanship and the tutorials are spot on. Thank you!
Good call on the friction fit for future electronics maintenance. You can be sure it will come in handy.
Excellent.Thank You for sharing 😊
You obviously know what you're doing. So your hesitation and then burst of joy when the lights worked was sooooo relatable. It's nice that I'm not the only one who holds my breath b4 it all comes together😊
That was my first time ever DIYing LEDs so saying that I knew what I was doing is high praise 😂
awesome video. Thank you very much for taking the time! Also, love seeing the self fist pump when it works. Exactly how I feel when it just works.
Ok, I am really happy you kept the blooper. OMG that makes it feel all the more relatable :)
You saved the best for last! Excellent work! Great attention to detail, that’s what I look for
That pantry shelving with the led strips is 🔥🔥🔥
So clean! I'm fixin to redo my pantry as well. You're such a talented woodworker. I wish I had your skill. I followed your plans for cabinets for my garage and they turned out great, except my drawers are 1/4" too small hahaha, so instead of two 1/4" shims, I have to use 3, which offsets the center.
Those kitchen shelves are awesome.
I actually am in talks with the wife on building a new mantel above the fireplace. Perfect timing, I was going to weld together a system like the Sheppard bracket. The link in the comments is broken though and I cannot check out with the item.
On a serious note, I believe that what you did cutting out the drywall and mounting the shelves is illegal, at least in the last 2 states I have lived in. The drywall purpose is to add a firewall of sorts to prevent fire accessing the framing of a home quickly. By cutting away the drywall you now have exposed the inner walls to fire. Anyone reading this I would recommend checking with your local building codes to be sure you are not putting your home in danger or setting up code violations that will need to be fixed when you sell.
As always, very detailed video! Thanks!
Read my comment above.
@@pepperman9 I do not see a comment from you other than this one.
I'm loving this video. I've become a real fan of TH-cam content providers doing "beginner to expert" videos. Question/comment: I'd like to hear your comments on how you dealt with pantry walls being out square. Did you correct it in the shelf 'ladders'? Or was it not enough to even worry about?
I corrected for a very small amount of "out of square" by cutting the ends of the side shelves where they meet the long shelf to a very slight angle. For me the studs were very square, it was the drywall causing the issue.
Pro tip, just scribe its alot easier than youd think
Great video! Learned a ton as a beginner.
Halfway through and I like your trick with the screw driver rolling over the 45’s, great trick. Never seen it before. Guess that’s why I enjoy watching this stuff, always learning, thanks!
Thank you for the tips. First time doing projects and I want to do it right!
Awesome!
Nicely done video, thank you!!
Beautiful job on those shelves, nothing like custom work😉
Looks nice and clean!
This video deserves more likes.
Fantastic! Thanks a lot!
You're welcome
Fantastic, dude! Thanks a lot for all the tips!!! 😃
Stay safe there with your family! 🖖😊
Thanks 😊
Well done. Lots of great info and your work process is very clean and thought out.
loved the flowating shelves for the pantry thanks!
👍
Fantastic video. Many ideas generated. Thank you.
Very awesome. I did something very similar but made the frame with plywood strips for the front and back. The bracket is awesome. I’m going to have to invent a project to use it.
Yep pretty handy!
Great video!
Pantry shelves came out amazing!
Thanks 😊
i relocated my 5th wheel toy hauler fridge and was looking for easy way to convert that empty space in to a pantry ... thank you this is very helpful and fast to the point .
I can even do this with my arthritic hands ... I got an idea of what i neen to do on a 4x4x12 space just by looking at your videos
love the outcome! great job!
Thanks 👍
Cool projects! Thanks 👍 for sharing your expertise. 😊😊😊
Thanks for watching!
That was a well done presentation. You've taught me everything that I now know about floating shelves. Thanks. Subscribed
Badass! Thanks for the content
great video matt! the ending was one of the best ive ever seen 😂
Hahaha yeah brings a new meaning to "land the plane quickly" 😆 🤣
best video on YT!
With the right tools, accurate execution of carpentry is possible. Congregations 👍
😀
Amazing information. Thanks
Wow, amazing.
Fantastic work 😃😃
Hey thanks!
That’s exactly why I learned how to repair drywall. 😂 Gorgeous shelves man, all 3 sets of them.
Ha! Thanks!
Beautiful. u r super good wood carpenter.
🙌
dude - killing it
Thanks brother!
Now i just need to get a few sets of floating shelf anchors and ill be good to go! I just got a router so this will be a nice project to test it out on
That’s why I like the small bits to screw down
I thank you for the Idea of moving the drywall
Yep! You're welcome 😁
Good Educational Content
damn those cables would drive me crazy
great video as always!
Which cables?
@@MWAWoodworks the wires that hang from the led
@@rulowth4815 Me too. I always cut dado, so lights are flush on the bottom and all wires are inside shelves.
Very cool ideas. I think I’m going to steal your last idea for my laundry room. Thanks!
I'm going to steal my own idea for my laundry room as well 😆 🤣
Good job man
Awesome! Your "expert level" shelves have given me some ideas to address the ugly painted particle board shelving in my walk-in closets.
Awesome! Love to hear it.
13:02 When we renoed our kitchen, the carpenter (my FIL) bolted angle iron to the studs and we put in a floating 1’ deep counter top you could park a truck on. Since we tiled, we could just use plywood for the shelf.
Thanks for this video. Lots of great ideas.
True. How are are U Mr richard
Nice as it is
Wow dude, that was amazing! Got me thinking now...just glad my wife wasn't watching or I'd be out there in the Florida heat trying to build one now 🤣...maybe when the weather down here get cooler. Def bookmarked this video. I'll have to check out the rest of your vids when the wife isn't around...👍👍👍
Great instructions 👍👍👍👍
Thank you 😊
Nice work 👌
Excellent, inspiring, thank you! Just a little comment here, regarding the jumper cables for lead strips: if you have an iron with spare 14 or + AWG cables (which can be found in almost any dumped electrical/electronic apparel, for free), you don't need to buy jumper cables, just a cheap 0.8mm to 1mm max Sn+Pb solder wire if you don't already have it (for domestic use, else having an alloy of Pb in your soldering would be illegal). Just make sure that the solder covers the contact rather than being the electrical transfer material in-between the contact, unless you use a wire alloy containing silver (Ag) but it costs more.
Nice!
😁
Loved this, do you have plans for this to buy and what kind of panel wood did you use for the shelves in the last one you showed?
Man, you’ve got some really sharp tips in this video! Good job!
Thanks 👍
Great video bro! 👍🏾
That cheer at 16:24 was definitely a chippies cheer though, all the sparkies are looking at eachother wondering what all the noise is about 😂😂
Awesome tutorial! Subscribed to you channel! 👍👍 Thank you for making this video and sharing your woodworking knowledge!! Really enjoyed it and appreciate the jokes on it as well. 😂😂 learned a lot and inspired me to do a small project.(just for beginners and starters like me) as I only hava a jigsaw (for now) yay!! hehe
Awesome thanks! 😃
I would suggest ditching the on/off button and using a motion sensing plug with timer, so the lights automatically come on when you walk into the pantry and auto-turn-off after elapsed time. Great video - I enjoyed seeing the beginner to advance skill & techniques! Thanks.
I considered a motion switch but i didnt know if I would like having the light come on every time I went into the pantry. I think i like having more control over its use.
You can program them to manual on but auto off @@MWAWoodworks
Another alternative is to run the switch to the door of the panty so the lights turn on when the doors open and off when they are closed. I did that with our closet doors and my wife loves it. It is especially useful for a panty if you store your groceries in there. Coming home with arms full of grocery bags, it would be nice to just walk in the pantry and set the bags down on the counter without having to stop and turn the switch on with your nose 🙂
@@TwilightxKnight13
IKR! I did the same for my pantry AND the laundry closet.
Great video! I came into this thinking I’d do the first one you showed, but now I’m curious. Do you think it’d be a good idea to use the pipe fittings you used in the first shelf to make a floating shelf? Maybe using a hole bit on the back of the shelf (as thick as that fitting on the wall)
Pro tip: listen to this dude lol
Forreal tho my man, you are awesome. You’re an amazing communicator and teacher and I’m thankful I came across your channel!
Thanks for the kind words!
What LED brand has those extension splices?
Nice!!!
LOVE IT MAN!! THANKS FOR MAKING THIS
I'd be curious to see you do a review of the HOVR bracket system. They claim to be the strongest method of making a floating shelf
Possible future video!
@@MWAWoodworks I'm getting ready to use them on some floating shelves in my bathroom. I ended up choosing them over this method because I needed to make an inside mitered corner for the shelving. And I couldn't think of a way to do it without one of the pieces being able to slide.
the compression strength of the drywall with the wieght spread across it is far greater than just bearing on the studs IMHO you could also drill a hole in the drywall and spray in some expanding foam to improve it's ability to spread and carry the load
I really enjoy watching this video 3 ways to do shelves. Let me tell you I'm bilingual Spanish & English and so far this is by far the best way in my opinion to do box shelves. One question what kind of wood did you use for front shelves boxes? keep it up the good work and nice job.
great video
I really enjoy watching this video 3 ways to do shelves. Let me tell you I'm bilingual Spanish & English and so far this is by far the best way in my opinion to do box shelves. One question what kind of wood did you use for front shelves boxes? keep it up 👍 the good work and nice job.
I used maple and poplar.
Great thanks 🙏
Thank you for doing this! What type of wood did you use on the first box build for the front face? Your overall thickness is 2.?”? 1.5” for the frame and .5 each top and bottom?
I was wondering why the long bit-and pre-drilling - good video
Want to do something similar to a deep but narrow closet I have, I’ve been avoiding it because I was dreading the miter corners but looks like they’re not needed. Just 3 rectangles. How’s that friction fit holding up? Just a thought maybe a thin edge band with some magnets for cable accessibility would be better… I did something like that on a spat wall with led in between slats and the magnets make it easy to access the cables.
Hahh, this was amazing.
Started out as any ol normal DIY make floating shelves that are not rly floating shelves and then by the end you are totally flexing and showing how floating shelves can go from a simple DIY thing anyone could do to a "ok yeah replicating this takes some serious skills".
Good job and consider myself subscribed! :D
Thanks for the kind words!
Fantastic work man, first time here and i like your style, your a born teacher.
You've erned a new subscriber today sir.
Glad to be a part of your channel.👍👍
Take care,
~Jonny5🥁
Good Stuff
👍
Original video with it's mistakes makes it worth it watching 😅
I thought that was such a bone head move it HAD to be included 😅
A true expert would recess the LED strips ;) Nice sequence, good concept for a video!
Ha! Cant recess them into 1/2 ply very well tho 😁
What are the dimensions of the hardwood you've used as the front piece for the advanced technique?
Another great video. Most roll their eyes, but I always chuckle about the stud finder joke😂
I'm obligated to do it, RIGHT!?
With a box shelve, what the thinnest support bracket you would use for a 8 inch deep shelf?
Love the video. Quick question. One the last one going through the Sheetrock and directly to studs, what’s the longest you could go like that?
No idea. My shelves are 11.5" and I dont see me needing anything much deeper to test this out.
@@MWAWoodworks I am going to try 15.5", but it's not this exact same configuration, so we shall see.
I have several IKEA made floating shelves and they are identical as the second one you showed it here. But they are much cheaper and, yes I had to drill my own holes.
Yuck
What a great video! Could a sensor switch be used for the leds? I would forget where the switch is....
I didn't google it but I'm sure someone makes a motion sensor that is compatible with LEDs!
So if you plan to use the shelves in an open kitchen but load them with heavier dishes which method would you recommend?
Great build!
Minor note: tracks are not to protect LEDs, but to diffuse heat from them. So protecting them too, but from overheating mostly, or they'd be plastic.
That's true for the track design in general however the LED strips I bought don't need it for heat dicipation. They can do fine without the track. I bought the track for protection only as I surface mounted the LEDs.
Question for you…. Battery operated Brad nailer or compressor air supplied one, and why?
Amazing work love the video but I think at the expert level you should also be thinking of the wood grain
Say more about that! Thinking of it in what way?
Hello, what wood did you use for your box shelves? It looks like 3/4in maple plywood and what did you use for your edges? was it a 2x6 cut in half? thanks.
A question. How far into the shelf should the support rods go into the shelf? Thanks
Could you take this process and transfer it to a countertop? Been thinking about how to build a floating wall mounted desktop... also, if it helps, I'd be starting from open air framing in our barn...
Great tutorial! In the last example, could you build the frames out of pine instead of hardwood?
I would not. The hardwood is much stronger and ridgid than pine.
lol, when you have not 1, but 2 types of wood glue in hand pumps, you know this guy is for cerealz!!
Glue flex 💪
Hi there Is it possible to make something like a 48x14 floating shelf ?
That looks clean except those hideous led profiles, you should use recessed ones and hide all wires. Beside that job well done. Cheers bro :)
You never see the LEDs unless you're a small child 😂 all you see is the wonderful light.
Awesome project! Thank you! Where would i purchase the light tracks with plastic covers?
Links are in the description