Some shortcuts: alt+left click will select the whole row, add shift to keep adding rows. On the numpad: 1 is Y/front view, 3 is X/side view, 7 is Z/top view, 9 flips the view, 2 4 6 and 8 rotate around the view and 5 swaps between ortho and perspective view.
You can use the scroll wheel to add more edges to the bevel. You can also hold alt while you select the edge of the circle to select the entire edge loop. :)
Hey Mugiwara! so I'm making a kemono fursuit head and as you can imagine, the eyes are pretty far apart. I can see fine out of both eyes but have a really bad blind spot in the middle of the head, so I can't see anything directly in front of me. Is there anything I can do so that I can see better? (It isn't furred yet so I can still make changes to the foam base) Thank you! Love your vids, they're really helpful :)
So my fursona has eyes that are all one colour (think like toothless the dragon but more slit pupils) Would I still need the circle shape in the middle for stability, or could I just make the outer ring with a bit of a lip on the inside?
@@MugiwaraCosplay After watching a few more of your videos. I like what you do. Thinking about it, it seems more easy to glue them in before fur because the fur can make it harder to see in putting them in. You have a lot of good videos. Thank you.
I order you Dutch angle dragon and what app don you uses to print I just got a printer a few weeks ago and I got the Dutch about a week or two and what app do you uses to print becuse I’m using a app right now where the base of the printer is off and printed to the side making it smaller so yea
Sorry, it's bit difficult to understand what you are writing. But I don't use any apps for printing, I use Blender to 3d model, and then Prusa Slicer to make the model ready for printing
You can! Using synthetic fabric dye, I’ve dyed minky this way and I believe it’s similar to faux fur, just taking your time and not leaving it alone so the fibers don’t melt
Some shortcuts: alt+left click will select the whole row, add shift to keep adding rows. On the numpad: 1 is Y/front view, 3 is X/side view, 7 is Z/top view, 9 flips the view, 2 4 6 and 8 rotate around the view and 5 swaps between ortho and perspective view.
You can use the scroll wheel to add more edges to the bevel. You can also hold alt while you select the edge of the circle to select the entire edge loop. :)
My friend is a huge furry and now I’m becoming one too 😂
Hey i have a question , How do you know if its will print it at the correct size ?
The slicer you use should have the size of the part
You take a physical reference of the eye of the base so you have exact measurements
Oh ok ty
Seriously wicked design and palette, great stuff.
Great video and info. Love it. Keep up the great job.
yayy this is awesome i always love seeing new tutorials from you!
I wish my friends build my 3d printed waterproof fursuit eyes like that!
Hey Mugiwara! so I'm making a kemono fursuit head and as you can imagine, the eyes are pretty far apart. I can see fine out of both eyes but have a really bad blind spot in the middle of the head, so I can't see anything directly in front of me. Is there anything I can do so that I can see better? (It isn't furred yet so I can still make changes to the foam base) Thank you! Love your vids, they're really helpful :)
I don't think you can do anything without changing the look on the base
So my fursona has eyes that are all one colour (think like toothless the dragon but more slit pupils)
Would I still need the circle shape in the middle for stability, or could I just make the outer ring with a bit of a lip on the inside?
The printer I have is the G code but I figured out how to fix it
how do you glue or place them into head base? Do I put fur on first then glue eyes in?
I just hot glue them on. And that's up to you
@@MugiwaraCosplay After watching a few more of your videos. I like what you do. Thinking about it, it seems more easy to glue them in before fur because the fur can make it harder to see in putting them in. You have a lot of good videos. Thank you.
I order you Dutch angle dragon and what app don you uses to print I just got a printer a few weeks ago and I got the Dutch about a week or two and what app do you uses to print becuse I’m using a app right now where the base of the printer is off and printed to the side making it smaller so yea
Sorry, it's bit difficult to understand what you are writing. But I don't use any apps for printing, I use Blender to 3d model, and then Prusa Slicer to make the model ready for printing
Oh ok Ty so much I will definitely try that and I’m sorry I am confused by my writing to
I suggest "Ultimaker Cura" as a slicer
I use both slicers, depending on which printer
Hey i have a question, can you dye fur is it bad if not how can you do it?
I've heard of it
You can! Using synthetic fabric dye, I’ve dyed minky this way and I believe it’s similar to faux fur, just taking your time and not leaving it alone so the fibers don’t melt
Hey could you make a tutorial on how to make a moving jaw but for cat fur suits
really helpful
but how do I import the reference of the eye into blender?
You go to Add and then Image
What material did u use for the face? I adore this!
It's 3d printed, with fake fur on
@@MugiwaraCosplay oh! I meant what type of fur XD
Different fake furs, I used 4 for that head
Is the dragon dude a personal suit?
She is, yes
@@MugiwaraCosplay sorry I didn’t mean to misgender my dragon lady friend! She’s very beautiful nice job ❤✨
Thanks
mark