Nilight Motorcycle LED Kit - Honda Rebel 500

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ม.ค. 2025

ความคิดเห็น • 9

  • @chrismartinez4465
    @chrismartinez4465 6 หลายเดือนก่อน +3

    Is there a video of the actual install process?

    • @MCmotoUSA
      @MCmotoUSA  6 หลายเดือนก่อน

      @@chrismartinez4465 with this kit it was fairly easy to wire them up, I didn’t film this as a how to just was sharing something I did for my wife’s bike. But the actual install is easy. Stick the led strips and on/off switch box where you want on the bike, route the wiring they’re connected to as cleanly as you can back to where the battery harness is, then red wire goes to the positive on the battery, black goes to the negative, and then that’s about it. I did say that it was a little more involved than I had thought, but that was just because the battery on this bike is buried deep under the seat, and getting the wires to be hidden cleanly was a little challenging, and I’m a perfectionist with stuff like this. This kit came with some decent instructions as well. Hope that helps!

  • @mossna71
    @mossna71 5 หลายเดือนก่อน +1

    Did you attach yours to the brake light? I’d love a video for where it would be connected. I put lights on my Harley, and never did find where to connect to the brake lights. I’d love to add these to my Rebel.

    • @MCmotoUSA
      @MCmotoUSA  5 หลายเดือนก่อน

      @@mossna71 I did not, but you could use a T tap splice connector to tap into the brake light wire.

    • @mossna71
      @mossna71 5 หลายเดือนก่อน

      @@MCmotoUSA I get that, I’m just not sure where to connect it. It was my first time doing anything resembling electrical, and my owners manual doesn’t show where I would find it.

    • @MCmotoUSA
      @MCmotoUSA  5 หลายเดือนก่อน

      @@mossna71 I’ll take a look to see if I can find you any more info on it. A quick search just showed it’s going to be the green/yellow wire going to the tail light

    • @mossna71
      @mossna71 5 หลายเดือนก่อน +1

      @@MCmotoUSA oh! I think I saw that one. I’ll probably have to use the extension wire.

  • @swaggy_9s
    @swaggy_9s 4 หลายเดือนก่อน +1

    what are those saddlebags you got on your bike they look clean!

    • @MCmotoUSA
      @MCmotoUSA  4 หลายเดือนก่อน +1

      @@swaggy_9s Those are by Viking Bags, made for the Rebel 500