300HP ALL WHEEL DRIVE SLEEPER?!? Justin's Mazda 6 MPS
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- MAZDA 6 MPS MOD LIST -
Tuning by RaydTuned
BNR S3 Turbo.
Cobb Accessport V3.
Corksport 3” Catback Exhaust system.
3” Stainless Steel Downpipe.
200 Cell Magnaflow Cat.
HDi GT2 Pro Front Mount Intercooler.
HTP 3” Short Ram Intake.
Autotech HPFP Internals Upgrade.
Bosch 3-Bar Map Sensor.
JBR Tru Boost EBCS.
Turbosmart Kompact Dual Port BOV.
Denso ITV22 Spark Plugs.
OEM Intake Manifold: VCTS delete, small porting job.
Damond Motorsports Rear Motor Mount.
Damond Motorsports Full EGR Delete Kit.
Damond Motorsports PCV Plate.
Damond Motorsports Oil Catch Can.
Secondary OCC.
Valve Cover Breather Oil Cap.
BC BR Type Coilovers.
DBA T2 Slotted Front Brake Rotors.
SAAS Boost Gauge.
JBR 51R Small Battery Box.
Work Emotion D9R/XD9 18x8” wheels
Full audio system with sound deadening.
➢Store: www.benkispec.com
➢Instagram @rex_hyt / rex_hyt
My GEAR -⬇
Camera geni.us/tWKpwD
My FAVOURITE Lens geni.us/hmxjq
Vlog Lens geni.us/Q1cld
BEST Starter Camera geni.us/q4yoK
Gimbal geni.us/JprwEje
Microphone geni.us/O3njD60
TOOLS I USE -⬇
Socket Set geni.us/8UBox
PICKTOOLS (Live Saver) geni.us/oQKoU0
SEND ME STUFF HERE:
P.O. Box 2178 Brighton North 3186, Australia, Victoria
Always loved the look of these car's, probably one of the fastest & nicest looking cars Mazda designed since the last gen RX7.
Plz take off the tow bar Justin.
Hahaha dude I think part of it is welded into the crash bar :| and it's rear end protection ;)
Justin Thomas
Did it come that way when you bought the car?
I'm not sure if it's possible to remove it if it's welded on.
Removing the crash bar would be a roadworthy issue.
If you can find someone who will do the job, they might end up shaving down the crash bar a little; which should reduce the stock weight.
Have you asked around, how did you find out it was welded on?
@@brantleyfoster021 Shaving down the crash bars to rEduCe StOcK wEiGhT....LMAO jog on.
Hadgerz
The tow bar was welded onto the crash bar, it would be impossible to remove it without shaving down the crash bar a little in the area's that the tow bar was welded onto it.
It wasn't about reducing the stock weight by shaving the crash bar purposely.
Check the conversation before you reply.
@@brantleyfoster021 this is the dumbest thing I've heard. and it doesn't matter that I know how to weld...
Mazdas are so underrated. Like a old mazda 6 is like 500 quid second hand. There so reliable
Mps's sadly aren't bud. The engines can't handle the power and they break easily. If you're getting one you'l need a few upgrades, not really a problem if you've some extra cash left over and you live somewhere like the US or Australia where you can buy the parts off the shelf. I live in N Ireland, parts aren't as easy got for these, and there are no real experts on them because they were so rare. I had 2 of them that suffered catastrophic failure. Totally lost confidence in them after the second one shit the bed. Shame because they're awesome when they're running properly.
@@martytdd1606 did you bend rods?
@martytdd1606 hi mate just bought one a month ago In Ireland but I was just wondering if you have any sites or places that I can get parts from
If you want reliability I say avoid any turbo charged engine.
I love mazda! That a beast
are all the mazdas 6 mps awd?
Yes only the Mazda 6 MPS is AWD, every other Mazda 6 is FWD. The Mazda 3 MPS is FWD.
I only just discovered this existed WoW
Serious Car me thinks
300 lads and 4wd
YES PLEASE
I need people to stop posting videos on these cars. So the it doesn't join the hype train and the price will stay down. So I can get my hands on it.
Just got me a mazdaspeed 6 2005. Looking for aftermarket parts is hard for this car. But can I say the edits in this vid are pretty good 🔥
Hows the car doing
they don't make mazdaspeeds in 05
Surely this car is way undetuned. With the mods he has should be easily at 320whp. Only because the bnrs3 caps at 350whp
I got one same color too bad its a 2.0 turbo diesel 😂
Welcome to the demonetized gang bro!
I wish they made a estate/tourer version of the mps
They did. M6 itouring i own a 08
good job 8/10
hm, makes me feel like getting my MPS tuned again. Mines running better mods and I just want 300 wheel hp for reliability and fun
With those mods it should be more around the 380whp. With an s3 u can max out stock fueling. Is it not fully tuned yet?
Rather not push it, high km and what not. But with a 3 MPS instead of a 6 you could just about get the 380 wheel hp
I know of someone getting 380whp in a 6 MPS with similar sized turbo but he is on e30 or e50
Damn that sounds nice!
Mazdaspeed 6 is gorgeous I’m getting one soon!!!!
i live in the states, im rebuilding one atm. cant fucking wait.
it'll be sick mate!!!!!!!
How's the build going?
Can someone tell me why tf everyone owning a Japanese « sports car » absolutely needs to fiddle with it and modify it ? It’s a genuine question
Mine easily with through Snow magedan while people abandoned their trucks
Got one, absolutely love it!
Have a BNRS3v2 with just about every mod in my 2008 ms3 for about 5 years now makes close to 400 on the original motor ..on E85.I love this car and dont think I will ever get rid of it lol
vDyno figures there surely but nice!
Picking mine up tomorrow.
Got it, loving it. Though to save the environment I just look at it and don't press the petrol removal button.
@@allanspraggon7207 whats the cons of it as im lookin to buy one an iv heard there not reliable
Stalled it, not really shocked. Mazda’s Speed6’s have a tricky clutch imo. Get out of my little Lancer daily driver into my Speed6 and it takes me a bit to get back used to it...
I daily an MPS6 and my clutch skills have increased dramatically since buying it. I came from MX-6's which had the lightest clutch known to man so getting it home was quite the experience lmao 🤣
I agree, I recently bought an 06 Mazdaspeed6 and I'm still getting used to the clutch. I've owned and driven Nissans so this is a different experience for me. I still like it though
My car is mazda 6 ultra v6
The mzr and Ford ecotech are essentially alike. The mzr was really more of a precursor to Ford's interest in intelligent awd and turbocharging sedans 😊
Should do a review on my car 😈
I miss my MPS :( had a 2871r, ~330awhp I think
Nice comb over
That’s a cool car
Thanks mate
This dude can't drive
This is likely making more like 350whp, considering the aftermarket turbo with the front mount
Owner of the car here, it certainly wasn't beyond 300whp, 350whp is quite a lot for stock fuelling and that small of a turbo/small amount of boost :)
Justin Thomas is this car reliable, and is it a good first car?
He's only running an S3, stock K04 made "290", but realistically it's gonna be around 250-265 mark. Especially with drivetrain loss of the AWD.
My 3 I'm hoping for 400 at the wheels once my new CST4 and turbo manifold go on
0-60?
It looks badass and beuatiufl...👍🏻👍🏻👍🏻
I see you don't have AEM REAR diff mounts very important if you want your diff to last
i sold it anyway but couldnt be fucked doing diff shit hahah part of why i sold it
Noooob driver
July or June 8th ?? Oh wait its today xD
Hii..any ideas that i can upgrade my mazda 6 2.0 speed? Now it’s super slow🙃
A simple modification that can be performed on a 2.0 engine is to get the head polished, ported, and gas flowed. Install a fast road cam matched to a few bigger valves. This in itself will give you a rev-happy Mazda 6.
Engine modification stages on the Mazda 6 can be divided into 3:
Stage 1 - Lighter flywheel, exhaust, remap, and panel air filter
Stage 2 - Fuel injector and fuel pump upgrades, polished and ported head, and fast road cam
Stage 3 - Competition cam, internal engine upgrades (valves/head/pistons), forced induction, and engine balancing
semi slicks good in the wet ?
Slowly😪
I would get one but as a p plater it’s 2.7k just for insurance 😣
Red or greens?
Insure yourself under your parents name. Much cheaper that way
wait till off Ps :) I did that, always safer, won't kill you to wait
So I have a 2003 Mazda 6 it’s not the base model it has the Bose sound system an leather seats as well. 2.3l also but front wheel drive and I been looking to do some kinda up grade an I think I found it 🤘🏽🤤💪🏽
eh, these can push 300hp with just a simple tune,
Am i the only one that just got a low km mps and keeps watching this video
Glad u like my old car haha!
@@iiBaZZa yer I got big plans do you still own yours i got 1 with 60k on it and its been owned by a boomer
Underated cars
Crazy that's this car is now p plate legal. It'll be good to see these around more
Getting thrashed more
are they?????
plan on getting my girlfriend one of those ahaha
Nice car 👍🏻🌹
Thanks mate
Love this car,going to try and find a good one(give the wheel back to owner,he knows how to drive it and do it justice,this guy must drive a g whizz lol
Very clean ride, thanks for sharing. 👍👏
What should u recommend? This (Mazda 6 mps) or a Mazda 3 mps or a Ford xr5?? They all seem very nice and fun, but want a second opinion.
Why mazdaspeed3 existing the 6? XD
test drive both :) (not a shitty xr5)
Speed6 or g37 for 7-8k what y’all think both around 100k leaning towards the 37 sedan
Get the speed obviously
Iwant a rhd one
0-100?
Que belleza de carro
I got a Mazda 6 and I’m trying to work out how to put a aftermarket stereo in. How’d you go about getting that mould for the head unit?
I found it on ebay or amazon just by searching Mazda 6 MPS single din fascia
Mint car .
Omg 300hp so sleeper
Lol true. Maybe he should 4g63 swap it 🤷🏼♂️
not claiming 300hp is amazing, but the body of the car doesn't suggest that it's beyond a normal sedan to the untrained eye
@@iiBaZZa hahahaha okay
It's not a sleeper when it's an mps lol
but most people don't know what an mps is (outside of car community/even some car guys), that was the point
Where did you get the mirror air freshener?!
used to be revhangs . com, but now search ebay user 'howsithanging888'
First
Justin Thomas
What does it do down the 1/4 mile drag?
Not a clue man but have done 0-100 in 5.3sec
What spark plugs are you using and what’s the gaps?
They were denso itv22 with a gap of 0.026"
@@iiBaZZa you still have the car bro?
Thinking of getting this and starting it as a project car any thoughts?
Do it
A lot of people end up fixing a lot on older examples of these so youll want plenty of spare cash in the bank, but they are AMAZING to drive
What car is that at 9:55 supra?
No, SW20 MR2
What kind of problems is this mps running into???
rust
@@maarten252 zero rust issues, this is Australia not North America.
@@iiBaZZa im living in Europe, almost every Mazda (not only the 6) has rust issues over here. but thats the only downside of the mazda 6. its a great car in general.
nek minut justin buys a 3
Soz m8
SPZDA 😁
thanks for noticing ahahaha
Nice video, I like this Justin guy he seems chill asf. More of Justin and his Mps on the channel Rex
You'll see me again xoxo
@@iiBaZZa haha cheers mate, nice mps , tastefully modified and not "over-done"
@@shreda125hilux7 thanks man that's what I aim for!
Is that a custom kit for the stereo up top? I would like that in my speed 6.
Yes it's just a fascia off ebay
@@iiBaZZa any link?
@@ginogetsshreddy_mtb86 I will firstly say I got it from an Australian seller so you might not have luck. You should just search on ebay or amazon etc 'Mazda 6 single din fascia'
Yeah I just searched it and found them thanks for the response.
Well stock Mazda 6 MPS 260hp(EU) for example is not very fast, it's a fast car but nothing woow. I race against it with my tunned diesel Astra J GTC 2.0 205+hp stage 1 remap, full free flow exhaust sistem, bigger fuel pressure sensor, KN intake, AP coilovers, 9Jot wheels 20". I was on MPS ass all the time, in cornes and on straight 2meters behind it...If that MPS was tunned the story would be totaly different.
Yeah that's what being stock means. And their top speed is limited to about 240 or 250 kmh. And who knows if the mazda driver was full in.
I go 2 mx5's 1 NA tuned 1 276WHP. I go a 6 MPS as family car and and A Maserati 3200gt. The mx5 turbo is the most extreme. The 6 MPS with awd is driving fast without shaking hands. And the 3200gt.... damn almost scary in 5th gear.
Not a sleeper
Only people that know about this car know it's fast a normal person wouldn't, definitely is a sleeper.
I think I'm funny but I'm just some retard, you would be able to tell by the exhaust, wheels and stickers that it has some power
You have a point herb hHa
H e r B
It does 0-100km/h in 5.3sec, (Even better if you remove the tow bar).
When I first saw this car, I thought it was sooo over the top.
It made waves in the class at the time too.
Hope Mazda revive it, that new compression ignition technology is amazing.
Still can't believe that the new Mazda 3 get's 40.6 miles per gallon in some hard driving🤩
@@brantleyfoster021 mazdas releasing inline 6 turbos next gen. If they release an inline 6 2.5 turbo mps with awd they will destroy the market.
Where is the owners hairline
Is green p can drive it?
yeah laws just changed so you can
He needs to get a tune on this ASAP before it blows.
Lol? It's tuned
I’d go one of these over a Subaru anyday
👎